The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Yamaha Oil Filter Wrench of 2020 – Consumer Guide & Reviews

Rank No. #2
Yamaha Genuine Oil Filter 5GH-13440-70-00
  • High quality filtration and engine protection, straight from the factory
  • This part has been superseded to new number 5GH-13440-70-00
Rank No. #3
WORKPRO 12" Adjustable Oil Filter Pliers, Oil Filter Wrench Adjustable Oil Filter Removal Tool, Ideal For Engine Filters, Conduit, Fittings, W114083A
  • High carbon steel for strength and reliability
  • Permalock fastener eliminates nut and bolt failure
  • Fits filters from 2-3/4 to 4-1/2-inches in diameter
  • Soft, nonslip red grips offer extra reach and leverage in tight places
  • Accommodates most common size car and small engine filters
Rank No. #5
ABN Adjustable Oil Filter Pliers – 12in Oil Filter Wrench Adjustable Oil Filter Removal Tool
  • ADJUSTABLE JAW SIZE: The ABN Oil Filter Plier features a slip joint to allow you to adjust the jaw size for a more versatile fit; 3 positions can open from 2.3 to 4.5 inches in diameter (60-115MM)
  • SECURE GRIP ON OIL FILTERS: Precise machined right-angled teeth line both jaws of the adjustable oil filter wrench set tool; Angled teeth provide a secure grip on your oil filter to avoid slipping and dropping
  • LONG REACH: Rather than fighting to reach those deeply set oil filters with an oil filter socket, use this 12-inch long (30.5 cm) universal oil filter wrench; Handles provide better leverage to remove stubborn or stuck filters in tight spaces
  • PERFECT FIT FOR YOUR NEEDS: Oil filter tool fits most filter sizes for small cars to trucks to farm equipment; compatible with most domestic and international makes and models
  • BUILT TO LAST: Constructed of hardened steel, this oil filter remover tool is designed for strength, durability, and longevity; Coated in black oxide finish provides resistance to rust and corrosion; Soft vinyl grip handles offer comfortable, secure grip while you work
Rank No. #6
Fuel Water Separator Wrench for Yamaha 2006-2020 with 6P3-WS24A-01-00 Filter YB-ACC04
  • APPLICATION -- Works on Yamaha Outboard Motors 2006 Serial Number 0406 To Current. Fits Yamaha 4-Strokes 150 to 350 HP, HDPI 2006+
  • FUNCTION -- Specially designed to remove fuel water separator cup. Stop using pliers that could potentially damage your expensive filter cup - this wrench will do the job!
  • BENEFITS -- Safely removes fuel water separator cup from filter assembly without damaging delicate plastic parts and avoids tangling in the water sensor wiring.
  • ADVANTAGE -- Quality steel. Same as OEM#: YB-ACC04. Only for Filter Cups That Hold 6P3-WS24A-01-00.
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply asked money back guarantee with 12 months warranty. No worry about buying!
Rank No. #7
2 PACK Yamaha Oil Filter 5GH-13440-61-00
  • Part is now superceded to 5GH-13340-61-00
SaleRank No. #8
TEKTON 5866 12-Inch Oil Filter Pliers
  • Fits oil filters from 2-1/4 inches to 4-1/2 inches in diameter
  • Three-position slip joint design quickly adjusts to size
  • Right-angle teeth grip while turning in either direction
  • Long handles reach into tight spaces
  • Soft, comfortable grips offer nonslip control
Rank No. #9
JDMON Universal Adjustable 3 Jaw Oil Filter Wrench Remover Tool for Removing Oil filters Range 2.4 inch from 3.8 inch in Diameter Include 1/2”-3/8” and 1/4”-3/8” Drive Adapter
  • 【Adjustable Fit】: The oil filter wrench can remove the oil filter from 2-1/4 inch to 3.8 inch(60mm-95mm) ,fit 1/4 & 1/2 inch square driver ratchet or 3/8 inch wrench which can remove various models of vehicles.
  • 【Premium Quality】: The oil filter wrench is made of 45# carbon steel which is much stronger than normal material and more durable and handy to remove oil filter. What’s more, it won’t damage your car or hurt yourself.
  • 【3 Jaw Design】: The tool is designed 3 jaw anti-drop design with firm hold on filter, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied.
  • 【COMPACT DESIGN】: This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces.
  • 【Best Service】: We offer life-time technical support, if you have any issues about item, please contact us by e-mail.
SaleRank No. #10
CTA Tools A254 Cap-Type Oil Filter Wrench, 73-Millimeter, Model: 889277002
  • Formed to fit the closed end of canister style oil filters for easy removal and installation of the filter.
  • Fits to the end of a standard 3/8" socket wrench or wrench extension.
  • For us on 4-stroke outboards (see specific models below) or other engines with screw on type oil filters.
  • Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Rank No. #11
OIL FILTER WRENCH Motorcycle Fit: Filters > WIX WL1000, 51358 / HONDA GEN. 15410-MFJD01, 15410-MM5013 Specifically made to fit only these three filters !
  • DESIGNED TO FIT SELECTED MOTORCYCLE OIL FILTERS:
  • PERFECT FIT FOR THE LISTED FILTERS ****************** FITMENTS ***********ONLY FITS FILTERS: *
  • ONLY FITS THIS FILTER>>>>>*WIX WL1000 Filter . . . . . . . . . . . . . . . . .. . . . . . . . . . . . *WIX 51358 Filter
  • +ONLY FITS THIS FILTER>>>>>>>> *HONDA GENUINE Filter. . . . . .15410-MFJ-D01
  • + Only FITS THIS FILTER >>>>>>*HONDA GENUINE Filter . . . . . . 15410-MM5-013
Rank No. #12
Yamaha MTS-TLSKT-02-10 Oil Filter Wrench - 5Dm; MTSTLSKT0210 Made by Yamaha
  • New OEM Yamaha Oil Filter Wrench
  • OEM Part Number: MTS-TLSKT-02-10
  • Item only fits specific models listed. The picture could be generic.
  • Message us with VIN/HULL for fast fitment verification.
Rank No. #13
OEM Yamaha Oil Filter Element for Outboards, PWC and Motorcycles 5GH-13440-50-00
  • Yamaha Part # 5GH-13440-50-00-00 has been superseeded by Yamaha to 5gh-13440-60-00.
Rank No. #14
WORKPRO Oil Filter Wrench Set, 3 Piece Removal Tool for Toyota, Lexus, Camry and Scion 2.0 to 5.7 Liter Engines
  • Versatile Application - This 65mm oil filter wrench fits Yoyota, Lexus and Scion Camry, RAV4, Tacoma, Highlander, Sienna, Tundra, Matrix and more vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system.
  • What Is Included - The oil filter wrench set comes with a 65mm oil filter wrench, the 3/8" ratcheting wrench and a 6" extra extension bar for better performance in limited space.
  • Sturdy Material - Our oil filter tools are forged from high quality ADC12 aluminum so they can be extremely tight causing tremendous pressure to be put on the wrench without cracking like cheaper cast aluminum or flex and damage the plastic cap.
  • Unique-headed Design - The 14 flutes design of the oil filter wrench for a secure grip without binding. The 6 slots on the bottle edge, which will match the Toyota oil filter cap well so that the caps can be removed easily.
  • Convenience to Use - Changing an oil filter is easily done if you have an WORKPRO oil filter wrench cause it comes in contact with the larger area on the filter housing and proves to be safer for the cap. Our oil filter remover will not slip and will have a solid grip so it will remove TOYOTA oil filters with little effort.
Rank No. #15
Steelman Oil Filter Cap Wrench 73mm x 14 Flute, Low-Profile Design for Confined Space, Durable Chrome Vanadium Steel
  • HEAVY DUTY - Made from heavy duty chrome vanadium steel to stand up to long term, repeated use
  • SPECIFICATIONS - 73mm inner diameter with 14 Flutes
  • DRIVE SIZE - Use with 3/8-inch drive ratchets, extensions, and torque wrenches
  • PRECISION FIT - Designed to fit snugly over the end of filters and to easily remove the old and install the new filter without damage
  • REACH CONFINED FILTERS - Snug fit and low profile lets you reach confined and hard-to-access filters easily that strap and chain style wrenches can't
Rank No. #16
Jetech Oil Filter Cap Wrench 90mm x 15 Flute, Cartridge Type Socket Removal Tool with 15 Flutes and 90mm Inner Diameter for Isuzu, Ford
  • STURDY MATERIAL - Made with quality carbon steel, the oil filter wrench is built to last with forged and heat-treatment process to add extra strength and durability.
  • RUST AND CORROSION RESISTANCE - To prevent from rust and corrosion, the oil filter wrench is featured with a fine and dense overall chrome coating on the surface.
  • EASY TO USE - The hex head allows you to use a 1/2" ratchet wrench or 22mm spanner on it. Its off-corner design distributes the force evenly to the round for long lifespan.
  • APPLICATION RANGE - The 90mm x 15 flute oil filter cap wrench is designed to install and remove the auto oil filters, and fits Isuzu, Ford.
  • LIFETIME WARRANTY - Buy with confidence with Jetech's lifetime manufacturer warranty. Terms and conditions apply.
Rank No. #17
Swpeet 2Pcs 12 Inch Large Adjustable Oil Filter Pliers with Universal 3 Jaw Oil Filter Wrench Tool for Diameters 2 1/8-4 1/2 Inches Fits ⅜ and ½ inch Drive Removing Motorcycles Cars Trucks
  • ♛ High Quality ------ The oil filter removal tool is made of hardened steel, which has strength, durability and service life. It is coated with black oxide coating to prevent rust and corrosion. Soft vinyl grip provides comfortable and safe grip during work.
  • ♛ Adjustable Jaw Size ----- Oil Filter Pliers has sliding joint, allowing you to adjust the clamp size to achieve wider fit; Three-position slip joint design quickly adjusts to size. 3 positions can be opened from 2.3 to 4.5 inches in diameter (60-115mm).
  • ♛ With 3 Jaw Oil Filter Wrench Tool ------ The 3 Jaw Oil Filter Wrench Tool ensures that the oil filter wrench can firmly fix the oil filter, helps users to quickly remove the oil filter, and reduces sliding and hassle. When more torque is applied, the claws become tighter.
  • ♛ Wide Applications ------ Oil filter tool fits most filter sizes for small cars to trucks to farm equipment; compatible with most domestic and international makes and models. Oil filter wrench tool features a 2.75” inch to 3.75” inch range, assisting the mechanic with a wide range of filter removing jobs on various models of vehicles.
  • ♛ What You Get ------ In this kit, You will get 12 Inch Large Adjustable Oil Filter Pliers with Universal 3 Jaw Oil Filter Wrench Tool, A more powerful alternative than many oil filter pliers and wrench; 3 jaws are chrome plated with top-grade steel and satin to convince users that the tool is durable.
Rank No. #18
Swpeet Standard Flexible Stainless Steel Oil Filter Wrench for Superior Gripping Power Diesel Fuel Filters and Oil Filters
  • ☞ ☞ A GOOD TOOL ----- It's pretty much a must have tool in your box, does need some breaking in time, and this tool is a good tool has a bubble pivot, and the handle is nice has finger groves on the grip. Great strap oil filter wrench for an unbeatable price.
  • ☞ ☞ HANDLE DESIGN ----- This filter wrench stands out like a beacon of gold. The handle is very ergonomic, the wrench itself doesn't flex or "crush" under extreme pressure, the welded gripping surfaces on the band itself are invaluable for loosening fuel filters without removing the fender well.
  • ☞ ☞ HIGH QUALITY ----- This Oil Filter Wrench will be by far the most sturdy, comfortable and useful filter wrenchyou have ever owned and you expect a long life out of it. Unbelievable value. I Wish you would have purchased sooner.
  • ☞ ☞ BEST FILTER EVER ----- Hardcore to the bone this wrench is. Even the swivel which is nice to have for difficult access areas is robust. Most of the time that is the weak point on other wrenches.
  • ☞ ☞ WHAT YOU GET ----- You will get a Oil Filter Wrench tool which is Tough, stainless steel band with permanently bonded textured coating for superior gripping power. Has a 3.2 to 3.74 (82.5-95mm ) range. This tool will only open to approx 3", measure your filter before buying. Ford 350 dually diesel engine truck will not fit this oil filter.
Rank No. #19
Jetech Oil Filter Cap Wrench 93mm x 15 Flute, Cartridge Type Socket Removal Tool with 15 Flutes and 93mm Inner Diameter compatible with Toyota, Chrysler
  • STURDY MATERIAL - Made with quality carbon steel, the oil filter wrench is built to last with forged and heat-treatment process to add extra strength and durability.
  • RUST AND CORROSION RESISTANCE - To prevent from rust and corrosion, the oil filter wrench is featured with a fine and dense overall chrome coating on the surface.
  • EASY TO USE - The hex head allows you to use a 1/2" ratchet wrench or 22mm spanner on it. Its off-corner design distributes the force evenly to the round for long lifespan.
  • APPLICATION RANGE - The 93mm x 15 flute oil filter cap wrench is designed to install and remove the auto oil filters
  • LIFETIME WARRANTY - Buy with confidence with Jetech's lifetime manufacturer warranty. Terms and conditions apply.
SaleRank No. #20
Yamaha 5DM134400000 Oil Cleaner Element Assembly
  • New OEM Yamaha Element Assembly Oil Cl
  • OEM Part Number: 5DM-13440-00-00
  • Item only fits specific models listed. The picture could be generic.
  • Message us with VIN/HULL for fast fitment verification.

Last update on 2020-10-23 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Yamaha Oil Filter Wrench for our consumer to review. The reports above show ratings of the best overal, best cheap Yamaha Oil Filter Wrench to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.