The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Woodriver 4 Way Pressure Clamping System of 2020 – Consumer Guide & Reviews

Rank No. #1
2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers (2 four way pressure clamps)
  • Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
  • Let’s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
  • Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
  • Now you can confidently glue up wide boards, shelving, table tops, and more up to 6” thick. To setup the clamps simply attach the clamp to any length 2 x 2’s (2” x 4” ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12” to 18” for best results.
  • This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12” in length. Wood is required for setting up the clamp. Wood is NOT included.
SaleRank No. #2
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers
  • Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
  • Let’s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
  • Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
  • Now you can confidently glue up wide boards, shelving, table tops, and more up to 6” thick. To setup the clamps simply attach the clamp to any length 2 x 2’s (2” x 4” ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12” to 18” for best results.
  • This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12” in length. Wood is required for setting up the clamp. Wood is NOT included.
Rank No. #3
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
  • Protect hands and prevent kickback like never before
  • Powerful high-friction durable grip for extreme hold
  • Precision cutting and control down to 1/4" Ripping
  • Fully adjustable for easy handling
  • Work with small stock safely on the table saw, Router table, Jointer, & Band saw
SaleRank No. #4
E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases
Rank No. #5
POWERTEC 70106 4-Inch Y-Fitting Dust Collection Hose Connector , Black
  • Overall dimension: 9-13/16-Inch x 4-1/16-Inch x 8-1/4-Inch; Provides airtight friction fit
  • Tough, durable ABS plastic material
  • Simple and quick to install
  • Provides a multitude of applications
  • Three 4-Inch nominal ends measure 3-61/64-Inch O.D. and 3-3/4-Inch I.D.
SaleRank No. #6
POWERTEC 20326 Horizontal Quick-Release Toggle Clamp, 500lbs Capacity, 225D, (pack of 4)
  • Includes: (4) horizontal quick release Toggle Clamp
  • Function: an essential hand tool and addition to your jig assembly, delivering a dependable and secure non-slip grip on your work pieces, jigs and fixtures
  • Design: a hold down Toggle Clamp constructed from cold-rolled carbon steel, possessing a low height design, a pressure adapter for easy depth adjustment and maximum clearance
  • Holding capacity: Toggle Clamp can hold up to 500 lbs.
  • Clamp specs: base 1-3/8” x 1-1/2” | Mounting slots 1/4” x 3/8” spaced 7/8” x 7/8” | bolt length, including rubber foot: 2-1/2”
SaleRank No. #7
Worx WX065 Clamping Sawhorses with Bar Clamps
  • [CUSTOM MADE CLAMPS] These two sawhorses come with integrated bar clamps to fasten big or small projects securely in both vertical and horizontal positions
  • [LIGHTWEIGHT & EASY TO MOVE] At only 4 lbs. each, you can toss them into the back of a vehicle or store them in the corner in-between projects
  • [SUPPORTS 1000 LBS] And the clamps provide up to 300 lbs. of pressure. Hold heavy projects securely in place for as long as you need
  • [STORAGE SHELF] On the bottom of these sawhorses we’ve made a place to hold a power strip or supplies. Give your workspace an extra shelf or more storage
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
Rank No. #8
Bessey KT5-1CP single spindle edge clamp for use with clamp rails up to 1/2"
  • For use with Bessey; Tradesmen clamps and other bar clamps, this edge clamp can be mounted anywhere on the bar to provide added clamping power. Bar sold separately.
  • Easy to use easy to install and highly durable
  • Wood handle
  • High strength roll formed threaded spindle threads
  • Locking knob for attachment to bar clamp rail included
Rank No. #9
WETOLS Right Angle Clamp 4 inch for Woodworking and Pocket Hole Joinery
  • 【4" Jaw Capacity】WETOLS right angle clamp features a 4-inch throat depth and a 3-5/8 inch (76mm) clamping capacity, which keeps pocket holes secure and square at 90 degrees during project assembly.
  • 【Strong Adjustable Clamping Force】The WETOLS angle clamp is the best tool for clamping, mainly used for welding, grinding and other processing. The jaws can produce a large clamping force, the clamped parts will not loosen, and the movable clamp seat with adjustable opening is convenient. The thumb screw of angle clamps allows for quick and easy adjustment of jaw capacity, which can match the jaw separation to your workpiece’s exact specifications.
  • 【Ergonomic Handle】soft rubber grip handles feature a quick-release lever for easily disengaging clamping pressure. The easy-to-use compact angle clamp adopts high-quality flexible springs, which have high strength, strong tensile resistance, and powerful clamping of the connecting rod, which is quick release and labor-saving for you.
  • 【Premium Quality Control】WETOLS right angle clamp is directly sold from the manufacturer, and undergo strict quality control process. The right angle clamp is made of high CRV material, which is strong and durable for long term use; the clamp head is made of high carbon steel by fine heat treatment, which has higher strength. The overall nickel plating is clean, not easy to break and rust.
  • 【Wide Range of Applications】WETOLS pocket hole right angle clamp is suitable for small hole joinery, carpentry, woodworking project construction, welding and maintenance. The metallic no-mar swivel pads ensure even and secure clamping every time, which is the best protection for your woodworking and pocket hole joinery DIY projects.
Rank No. #10
POWERTEC 70275 3-Way Dust Collection Fitting w/Y Shaped Design for 4 in Hose & Cuff
  • INCLUDES: (1) 3-Way Junction Dust Collection Fitting
  • FUNCTION: Allows you to connect up to three individual dust collection tools or machines to one portable dust collector without having an expensive piping system set-up
  • COMPATIBLE: This 3 way splitter features a y-shaped design with 4” nominal, actual 3-29/32”OD inlet and outlet ports (accepts most 4” ID dust collection hoses and flexible tubing). Please note that a blast gate and/ or hose clamp may be required for direct machine connection (not included)
  • VERSATILE: Works well with most dust collection tools and accessories, including band saws, belt sanders, table saws, jointers, planers and more
  • QUALITY: This dust collector adapter is made with super durable ABS plastic, known for it’s resistance to scratches, high impact and heat
Rank No. #11
Rockwell JawHorse Portable Material Support Station – RK9003
  • [ALL STEEL CONSTRUCTION] Built to last and built to hold your most important projects while your hands stay free to use your tools
  • [CAN HOLD A STANDARD 36” DOOR] With up to 37” of clamping range and a 3/8” per step clamping method
  • [1 TON OF CLAMPING FORCE] 2200 lbs of pressure means the project isn’t going anywhere, and with a max load of 600 lbs it can handle a lot
  • [NO MAR PADS] Made from urethane, so they grip the material without leaving any marks, perfect for premium woodworking projects
  • [TRIPOD BASE] Three perfectly positioned legs actually provide more support on uneven ground than four legs would
Rank No. #12
Relitec R Right Angle Clamp Corner Clamp 90 Degree Positioning Squares Woodworking Tools for Wood Cabinets, Carpenter Tool for Picture Frames Box Drawer, Set of 12(3" 4" 6")
  • 【High Quality Material】Relitec Positioning Squares Featuring a high-impact Plastic construction that insures optimal Durability and Lightweight usability.
  • 【Perfect 90 Degree Clamps for Woodworking】 It'll be a breeze to create the Precision 90 Degree Right Angle woodwork, so essential in ensuring balanced project outcomes. Quickly and Easily Clamp on the Squares.
  • 【A Variety Of Sizes】A variety of 3", 4" and 6" sizes for more woodworking workpieces. Applicable to any thickness of wood, no thickness limit, meet your different needs.
  • 【Wide Application】 You'll have exactly what you need to create perfectly square boxes, drawers, cabinets, frames, furniture cabinets, etc. Some woodworkers even find it useful to incorporate them into their jigs and fixtures. Satisfaction, high-utility, efficiency-squared.
  • 【Unique Gift】 Our Right Angle Clamp is a great gift for Men, Father/Dad, DIY Handyman, Husband, Boyfriend, Him who have everything.
Rank No. #13
HFS (R) Hold Down Clamp Clamping Set Kit Bridgeport Mill (5/8"Slot 1/2" Stud)
  • [SIZE]: Table T-Slot size: 5/8IN, Stud size: 1/2IN-13
  • [PACKING]: T Nut No. TN-0212 Step Clamp 25S-12, 40S-12, 60S-12, (2pcs Each size) Setp Block: STB-1, STB-2, STB-3 (2pcs Each size)
  • [MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts heat treated.
SaleRank No. #14
Bessey BPC-H12 1/2-Inch H Style Pipe Clamps , Red
  • Mpn: BPC-H12
  • Country of manufacture: China
  • Manufacturer: Bessey
  • H style base prevents clamps from tipping over
  • Crank handle clears work surface when opening and closing the jaw on the clamp
SaleRank No. #15
XRPAOWA 4 Pcs Toggle Clamp 301AM Stroke Push Pull Action Hand Tool Light Duty
  • Toggle Clamp Stroke Push Pull Toggle Clamp 301AM GH-301AM jigs machine operation, woodworking jigs, welding, mould, electronic equipment assembly
  • Toggle Clamp 301AM Hand Tool Toggle Clamp GH-301-AM Spring clamps 301AM Toe clamps 301AM Antislip Push Pull Clamp holding capacity great 99lbs
  • Hand Tool Toggle Clamp 301AM Quick-Release Toggle Clamp
  • A rock-solid grip to install on jigs, tool fixtures, or movable bases
SaleRank No. #16
PONY 50 Pipe Clamp, Fixture for 3/4-Inch Black Pipe
  • Mounts on any length 3/4” black pipe with both ends threaded (pipe not furnished)
  • Clamping capacity only limited by length of pipe used
  • Multiple-Disc-Clutch design which allows a secure hold at any point along the pipe
  • Clamping faces are approximately 1-3/4” square
  • Pony Tools Inc. makes all PONY Clamp Fixtures with U.S. and foreign parts in our Chicago factory"
Rank No. #17
POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System, 5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack
  • Includes: (2) quick screw down Clamps with 5-3/8" Max opening, 2-3/8" Throat depth
  • Premium design: features High quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood
  • Steel pressure pad: complete with removable non marring plastic
  • Superior clamping force: delivers consistently secure placement and safe Clamp action for a seamless workflow
  • Versatility: These rail Clamps provide a portable clamping option to a table saw, perfect as MFT Clamps for your homemade workbench, great for ripping sheet metal, and fit in a T-slot
SaleRank No. #18
90 Degree Positioning Squares Right Angle Clamps Aluminum Alloy Woodworking Carpenter Tool for Picture Frame Box Cabinets Drawers 2 Squares(14cm/5.5")+ 4 Clamps
  • High Quality Material:Aluminum Alloy(6061-T6) squares clamps. CNC Machined from a solid block of aluminum, durable material, will lasts for years. Surface Treatment-Anodized red surface.
  • Easy to Handle: Easy to handle and the squares have Beveled Edges,won't damage fragile cutting edges. Just place the square in the corner of the two stock pieces you need to square and secure with a set of clamps.This set of square and clamps can make your operation more convenient. The set Squares and Clamps are fully adapted to various large and small DIY projects.
  • Wide Application:This 14cm carpentry are professionally used to assemble and DIY by claping boxes, drawers, cabinets, frames, furniture cabinets, etc. Perfect for squaring up shelf cabinets. Maintain a perfect square while assembling frames, cabinets, or just about any box!
  • Professional Woodworking Tools:Designed to be clamped to most kind boxes to assist with squaring during glue up. It can work with clamping tool to check and position the corner for wood board jointing to gluing up or welding at a right angle. Very practical tool to make your woodworking project easier.
  • Best Size Choice:The Evwoge 5.5 inch 90 Degree Positioning Squares Solid Right Angle Clamps( not too light not too heavy for use) is the best size for your small or big box woodworking work. The actual Woodworking work shows that this size(14cm/5.5 inch Squares)set is a very scientific and suitable length size choice.
SaleRank No. #19
Bora Portamate Mobile Base Kit PM-1100 - Heavy Duty, Universal, Customizable, Adjustable Rolling Set, Dolly Roller Frame and Casters for Moving Equipment, Tools, Machines - 400 lb Capacity
  • 400 LB CAPACITY: The Bora Portamate Mobile Base Kit PM-1100 is customizable to accommodate any machine size footprint and has a weight capacity of 400lbs. (181 kg)
  • MOUNT & MOVE EASILY: Your large machines, woodworking equipment, and power tools can all be mounted and moved with ease, including table saws, bandsaws, workbenches, and more
  • ADJUSTABLE SIZE: All types of machinery and other heavy items can be mobile with the PM-1100. Just measure the machine’s footprint, cut 1/2" or 3/4"plywood (not included) to size for the base, then fit the hardware, and you’re ready to go
  • EASY GLIDE + LOCKING LEVERS: The easy to use foot-operated locking levers lock the 3 inch hard plastic caster wheels into place. This kit is perfect for garages, woodshops, workshops, or anywhere you need to make your equipment mobile
  • LOW PROFILE: This mobile base caster kit lifts your machine height by less than 1 inch, adding only a small increase to your working height while allowing your equipment to be completely mobile and moved around as needed
Rank No. #20
Relitec R Positioning Squares, 90 Degree Corner Clamp, Right Angle Clamp Woodworking Tool, Carpentry Squares, Carpenter Tool for Picture Frames, Cabinets or Drawers, Set of 8(3" 4")
  • 【High Quality Material】 Featuring a high-impact plastic construction that insures optimal Durability and lightweight usability.
  • 【Perfect 90 Degree Clamps for Woodworking】It'll be a breeze to create the Precision 90° Angled woodwork, so essential in ensuring balanced project outcomes. Quickly and easily clamp on the squares.
  • 【Two Different Sizes】Two Combinations of 3" and 4" sizes, for more woodworking workpieces. Applicable to any thickness of wood, no thickness limit, meet your different needs.
  • 【Wide Application】 You'll have exactly what you need to create perfectly square boxes, drawers, cabinets, frames, furniture cabinets, etc. Some woodworkers even find it useful to incorporate them into their jigs and fixtures. Satisfaction, high-utility, efficiency-squared.
  • 【Best Gift】 Our Right Angle Clamp is a great gift for Men, Father/Dad, DIY Handyman,Husband, Boyfriend, Him who have everything.

Last update on 2021-07-23 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Woodriver 4 Way Pressure Clamping System for our consumer to review. The reports above show ratings of the best overal, best cheap Woodriver 4 Way Pressure Clamping System to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.