The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Wire Puller Machine of 2020 – Consumer Guide & Reviews

Rank No. #1
KUNHEWUHUA Electrician Wire Puller Through Wall Electrical Wire Threader Threading Machine Automatic Stringing Wire Machine with 30m Lead Wire Two 88FV Batteries One Recharger
  • 【Parameters】Line speed:40M/min Pulling force: 130kg Net weight: about 3KG Lithium Battery Capacity: 88FV
  • 【Lead wire】 This auto wire threader has strong pulling force, which can pull up the weight of 130kg.Besides, it is controled by intelligent control system.
  • 【Lead auto-straightening and auto stop】 Wires are automatically straightened by pulling the wire wheels. And the auto stop system automatically memorize the cable length.
  • 【High quality】The high-speed battery was equipped. Without power cable, the threading machine works more efficiently and enduringly.
  • 【Applicability The kind of lead line was not restrained and all kind of 1.5-8MM lead lines can be used.
Rank No. #2
CURRENT TOOLS High Speed Cable Puller - Lightweight Electrical Cable Puller with 3,000 LB Pulling Capacity & Mobile Cart Included - 33
  • HIGH SPEED CABLE PULLING - Seamlessly pulls electrial cables with pulling capacity of up to 3000 lbs
  • JOBSITE MOBILITY - The rolling base allows for easy mobility around the jobsite
  • LIGHTWEIGHT DESIGN - Weighing only 75 pounds, this cable puller is manageable to move, while maintaining durability
  • QUICK RELEASE - Get the job done faster thanks to the quick release conduit couplings and integral heavy duty two speed motor
  • MADE IN THE USA - Proudly designed and crafted at our manufacturing facility in Greenville, SC
Rank No. #3
KKmoon 77pcs Stud Welder Dent Repairing Kit Pulling Claw Shrinking Welder Machine Slide Hammer Puller Straight Rull Rings Round Washers Wiggle Wires
  • ▲ Save more time and don't need wait for car dent repairing in shop.
  • ▲ With a 6-finger puller claw hook, strong and powerful.
  • ▲ The welding machine is made of fine quality ABS and copper. With 3 pieces switches, meeting your needs.
  • ▲ The washers holder is applied to washer thickness less than 2mm.
  • ▲ Including a dual-end welding tip, a flat end and a sharpen end.
Rank No. #4
YJINGRUI Electrician Wire Puller Through Wall Electrical Wire Threader Machine Automatic Wiring with 30m Lead Wire (One Battery One Charger)
  • Pull force: 200Lb / Dual motor, More powerful than single motor wire threader.
  • Lithium Battery Capacity: 10000mA 21V / 80 minutes continuous work.
  • Lead wire: This auto wire puller through wall is equipped with 30m lead wire, diameter 5mm.
  • Push out / Pull back: Threading the lead wire through wall, connect the electrician wire then pull back.
  • Application: House wiring/Hydraulic wiring/Communication wiring/Electrical wiring
SaleRank No. #5
SWANLAKE 40FT Fish Tape Wire Puller Through Wall, Electrical Fish Tape Pull Push Kit
  • Wire threading machines work well in smaller pipes !! not for thicker cables and pipes
  • Compared with glass fiber, our plastic coated steel fish belt has strong traction, good flexibility, resistance to aging and high temperature, and will not break due to too much bending.
  • Non-conductive coated plastic structure, reusable, good elasticity, multi-function cable drawer is suitable for telecommunication, wire, wall, floor and other wiring installation.
  • Fish belt buckles are used to help the fish belts be more convenient to use. One side is connected by wires, and the red cap can prevent the wires from being disconnected when pulled. The other side is connected with a fishtail strap to secure the wire to the fishtail strap.
  • The head wheel at the end of the wire can be used at 360° and is easily passed through the elbow. Unique connection, durable and easy to use.
Rank No. #6
Solary SP7110 Spot Welding Machine Car Dent Puller Dent Pulling Machine Spotter Welders
  • Equipped with suction slide hammer set for repairs of large dent areas without damaging the paint work
  • Dual-function welding contact tips with convenient earth connectors: weld washer ring and increase electricity current for heating at the same time
  • Voltage transformer enables high output voltage and heavy duty load
  • Widely adjustable welding current; Pre-programmed time setting during operation mode selection
  • Suitable for welding washers, special washers, wriggle wire, rivets, sheet patching, carbon rod heating and shrinking.
Rank No. #7
Solary Inverter aluminum MIG Welder - Multi Process IGBT Digital Inverter Welding Machine Flux Cored Wire Solid Core Wire Welding Pulsed MIG Welder Equipment
  • Applicable on a wide range of materials such as steel, stainless steel, HSS high strength steels,galvanized sheets, aluminum and its alloys . Suitable for soft wire such as the Alsi5 or Alsi12(recommended for car body repairs)
  • With momory function, can store and recall 6 sets of customize welding data.
  • Weldable 0.015 inch sheet.Digital display panel and the latest PWM control technology . Double-pulse technology ideal for aluminum welding.
  • SYNERGIC function-rapid and easy setting of welding programs. Ensures a constant strong control on the arc for the quality of welding.
  • Include IGBT inverter, soft switching control technology and fast arc ignition system to ensure an efficient and steady welding Materials' mechanical properties are maintained with less welding deformation and spatter.
Rank No. #8
Solary 4200 Spot Welding Machine 4200A Car Dent Puller Dent Pulling Machine Spotter Welders
  • Suitable for welding washers, special washers, wriggle wire, rivets, sheet patching, carbon rod heating and shrinking.
  • With sucker to extract the big dented area without damaging the paint surface.
  • Copper transforamer for high current output and high duty cycle.
  • With input voltage meter for adjustment reference.
  • With star washer for welding and pulling directly. Auctomatically timing setling.
Rank No. #9
POLLIBEE Bee Hive Beetle Trap Case for Beehive Reusable Small Hive BeetleTrap,Beekeeping Beehive Beetle Collector for Beehive
  • SPECIAL DESIGN: Designed to fit neatly between outer frames in a hive
  • SIMPLE THEORY: Beetle Blaster is a plastic device inserted between frames in a hive to trap Small Hive Beetles (SHB) and thereby protect healthy honeybee colonies.
  • REUSABLE: Made by high quality plastic material, reuseable design make you use it more easily
  • The holes in the top of Beetle Blaster are big enough to allow SHBs to enter, but cannot be accessed by honeybee. Just use vegetable oil like apple vinegar,safety.
  • 100% Money Back Guarantee
Rank No. #10
WARN 885000 PullzAll Corded 120V AC Portable Electric Winch with Steel Cable: 1/2 Ton (1,000 Lb) Pulling Capacity
  • Manufactured in China
  • Easy to use
  • Highly durable
  • Always remove any element or obstacle that may interfere with safe operation of the pulling tool
  • No load line speed: 13.8 fpm
Rank No. #11
SaleRank No. #12
Magnepull XP1000-LC Wire Pulling System
  • New design: Retriever has 30% more pulling strength!
  • New design: NEW Tapered Bullets is 25% strength & has less drag
  • Eliminate multiple trips in & out of attics and crawl spaces
  • MagnePull cuts wire fishing time by up to 70%!
  • Note*** Designed for Professionals only, not designed for DIY applications
SaleRank No. #13
Southwire M6K-M Maxis 6K Cable Puller with 1680-20 Motor, Includes Conduit adaptors 2" - 4" and PC100, 6,000 Lbs. Pulling Capacity
  • FAST SETUP AND OPERATION: One person, 2 minute set up and operate. Quickly adapts from underground to overhead pulls
  • LIGHTWEIGHT: weighs 76 lbs. No need to bolt to the ground
  • HIGH SPEED: 2 pulling speeds- 12 fpm on low (at no load) and 44 fpm on high (at no load)
  • HIGH CAPACITY: 6, 000 lbs. pulling force
  • VERSATILE: can adapt to virtually any wire pull
Rank No. #14
Magnetic Wire Pulling System - Wire Routing Magnet Tool Kit - Wall Electrical Cable Navigation System
  • Small design of leader allows unit to fit into small openings. Secure connecting eyelet prevents wires or cables detaching from leader. Electrical wire pulling kit with heavy duty nylon string helps easily navigate through narrow spaces
  • Easy to use for any DIY project, no professional training required. Hard-case provided for storage
  • Route electrical wires & cables in enclosed areas with ease, works underwater as well
  • Kit contains hard-case, 25 ft heavy duty nylon string w/ spool, 1 scout & bait magnet, 1 eyelet leader
Rank No. #15
Greenlee - Tugger (G3) (Pkgd), Pulling (G3)
  • Leading manufacturer of high-quality tools
  • Trusted and used by experts, professionals and those who know quality
  • Proven and Tested for durabilty and function in real world job site conditions
  • Seven US Based Manufacturing Facilities
  • United States Workforce
SaleRank No. #16
D'Addario Pro-Winder String Winder and Cutter, Black
  • ALL-IN-ONE RESTRINGING TOOL - The ergonomic and high-quality design of the D'Addario Accessories Pro-Winder makes string changes quicker and easier than ever before with its built-in clippers, bridge pin puller and peg winder all rolled into one tool.
  • MUST HAVE FOR EVERY CASE – Why fill up your case with three tools when you can have one that does it all? This indispensable tool has been designed to fit comfortably in your hand and for use on virtually all electric and acoustic guitars, basses, banjos and mandolins. Also available in a bass guitar version.
  • BUILT-IN STRING CUTTER – With the hardened steel clippers on the Pro-Winder string cutter you can cleanly cut through your old strings to remove them quicker and easier, and trim the excess off new strings after looping them through the tuning machines.
  • INTEGRATED BRIDGE PIN PULLER- Designed with acoustic guitarists in mind, the Pro-Winder has a built-in bridge pin puller. This makes removing stubborn pins simple without risking damage caused by pliers and other tools.
  • MADE IN THE USA - D'Addario Accessories is known for innovative, problem-solving, quality musical accessories that are proudly designed, engineered, and manufactured in the USA to the most stringent quality controls in the industry.
Rank No. #17
Filco Keyboards Wire Keycap Puller Tool
  • For mechanical and membrane keyboards only.
  • Can hold 3 caps at a time.
  • Length: 16.5 cm
Rank No. #18
Bestauto Dent Puller Machine 3500A PRO Vehicle Panel Spot Puller Dent Spotter 110V Multispot Bonnet Door Repair
  • 【SMALL WELDING SPOT】- Our machine makes small welding spot that means it won't damage the anti-corrosive paint on the another side of panel.
  • 【2 WELDING GUNS】- With 2 welding guns, one machine can be capable of two different functions, which means the time and energy spent on switching guns could be reduced and working efficiency will rise.
  • 【EFFICIENT RADIATOR】- The cooling system can quickly achieve heat dissipation, and make the machine not so easy to burn. Providing high efficiency during your work and fast heat dissipation is ensured.
  • 【STANDARD ACCESSORY】- Hammer, carbon rod, wavy line, six-jaw hook, hook, manual suction cup, gasket, spot welding head, single-sided origin welding head. Making you well-prepared.
  • 【WIDE APPLICATION】- Suitable for Sheet metal fire, meson, straight pull, spot welding, flattening, wave line, stud, OT film, triangular and so on
SaleRank No. #19
Maerd Terminal Removal Tool Kit, 76Pcs Terminal Ejector Kit for Car, Pin Extractor Tool Set Release Electrical Wire Connector Puller Repair Key Removal Tools
  • 【Portable Safety Protective Bag】This set of tools is sharp and can be placed in a protective box for easy carry and prevent children play as toys
  • 【Package Include】 76Pcs pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 18Pcs Casing Tool
  • 【High Quality】The terminal extractor tool is made of premium quality stainless steel and plastic, not easily get out of shape, can be long term use. The pin removal tool has different sizes fit any terminal
  • 【Easy to Use】 The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.The O ring handle make it more safe to operate the terminal pins connectors
  • 【Wide Application 】This set of electric pin remover tool is light weight and compact shape, Split into multiple portable sets, which can be used in different places, The wire extraction tool is perfect for cars, motorcycles, household appliances and other electronic devices
Rank No. #20
Qiilu Pilot Bearing Puller, Bearing Puller Tool 3 Jaw Pullers Set Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV Motorcycle
  • ◜⋓◝ 3 JAW-3 Jaw Gear Puller removes pilot bearings, pump bearings, brushings, 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.
  • ◜⋓◝ Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force
  • ◜⋓◝ Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc
  • ◜⋓◝ Three Jaw Design Applies Even Pressure Preventing Damage to Bearings. The overall use of chromium vanadium just manufacturing, high hardness, good toughness, strong and durable.
  • ◜⋓◝ After-Sales Service: We stand behind all of the products with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.

Last update on 2021-03-31 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Wire Puller Machine for our consumer to review. The reports above show ratings of the best overal, best cheap Wire Puller Machine to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.