The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Valve Guide Tool Kit of 2020 – Consumer Guide & Reviews

Rank No. #1
BTSHUB 11 pcs Valve Stem Seal Removal & Installer Kit Tool Remover Pliers, Drive Handle, Sockets & Seal Adapters, Universal Camshaft Remover Tools for Automotive Car Truck
  • 【Function】 11pcs Tool Kit with a Carrying Case – Pliers, Drive Handle, Sockets, Adapters to pull old valve seals and install new seals on overhead camshaft engines. It works for valves in place or removed from heads on automotive, motorcycle, marine, and power sports engines
  • 【Specifications】 Precision machined seal driving adapters to guide the seal for a proper setting; Valve pliers includes a 6” (15.2cm) handle and is 10.5” (26.7cm) long overall to reach narrow spaces; Pliers jaws are serrated for extra grip and has a 5.5” (14cm) maximum jaw opening; Knurled ends on 2” (5.1cm) adapters for tapping down the new seal and 6” (15.2cm) handles to provide extra grip; 3.5” (8.9cm) deep sockets for seals O.D. 10.8mm to 14.8mm
  • 【Durable and Long Lasting】These tools are made of alloy steel for strength and durability, which is unique steel with extreme anti-wear properties. Comes with a premium well-organized box for easy storage and transport. All the tools are stored safely and orderly in a beautifully packaged box that can withstand high-strength extrusion
  • 【Applications】Applicable for commercial or occasional use; Home use, Car maintenance, Automotive Tools. It is suitable for 5, 5.5, 6, 6.5, 7, 8, 3/8 inch seals, and these 2 deep seal driving sockets are for seals with 10.8-14.8cm diameter
  • 【Package Includes】1pc valve stem seal plier,1pc drive handle,2 pcs seal driving sockets for seals, 7pcs seal driving adapters fit seals 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, and 3/8”,1pc plastic carrying case
Rank No. #2
ABN Valve Stem Seal Remover and Installer 11-Piece Tool Kit with Carrying Case – Pliers, Drive Handle, Sockets, Adapters
  • Practical: Use the ABN Valve Stem Seal Remover and Installer 11-Piece Tool Kit with Carrying Case – Pliers, Drive Handle, Sockets, Adapters to pull old valve seals and install new seals on overhead camshaft engines
  • Durable: Constructed from alloy steel with anti-wear properties for added strength and longevity
  • Specifications: Precision machined seal driving adapters guide the seal for proper setting; Valve pliers includes a 6” (15.2cm) handle and is 10.5” (26.7cm) long overall to reach narrow spaces; Pliers jaws are serrated for extra grip and has a 5.5” (14cm) maximum jaw opening; Knurled ends on 2” (5.1cm) adapters for tapping down the new seal and 6” (15.2cm) handles to provide extra grip; 3.5” (8.9cm) deep sockets for seals O.D. 10.8mm to 14.8mm
  • Easy Storage: Heavy-duty 12.5” x 10” x 2.25” (31.8cm x 25.4cm x 5.7cm) plastic blow-molded carrying case with labeled size identification for easy transportation, simple storage, and quick organization
  • Contents: Package includes (1) valve stem seal plier + (1) drive handle + (2) seal driving sockets for seals + (7) seal driving adapters fit seals 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, and 3/8” + (1) carrying case
Rank No. #3
Brian Tooley Racing BTR LS Valve Seal Kit with Install tool 4.8 5.3 5.7 6.0 6.2 7.0
  • Brian Tooley Racing LS Valve Seal Kit, 8 Black Intake and 8 Black Exhaust Seals
  • Includes Valve Seal Installation Tool
  • LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides
  • Separate Spring Locator is Required
  • Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber
SaleRank No. #4
ABN Valve Hand Lapping Grinding Tool Kit 2-Piece Set – Dual-End Suction Cup Lap Stick, 1-1/8, 1-3/8, 5/8, 3/16 Inch
  • ACCURATELY SEAT VALVES: The ABN Valve Hand Lapping Grinding Tool Kit 2-Piece Set – Dual-End Suction Cup Lap Stick, 1-1/8”, 1-3/8”, 5/8”, 3/16” Inch helps you properly match valve seats during an engine top-end rebuild; These tools include dual ends with oil and UV-resistant synthetic rubber cups that help you put the finishing touches on your tune-up
  • VARIOUS APPLICATIONS: Suitable for any clean, flat surface of a lawn mower, chainsaw, or small or large engine car or other vehicle with 5/8-inch, 13/16-inch, 1-1/18-inch, and 1-3/8-inch (1.6cm, 2.1cm, 2.9cm, 3.5cm) valves; 8.9-inch and 8.3-inch (22.6cm and 21.1cm) overall lengths make these tools useful for even installing and removing recessed fixtures or hard-to-reach mini-flood light bulbs
  • GRIP COMFORTABLY: 6.75-inch (17.1cm) long handles for ultimate control, less user fatigue, and more productivity; 8.9-inch and 8.3-inch (22.6cm and 21.1cm) overall lengths
  • EASY TO USE: Clean all carbon deposits off valve and wipe down each valve, install valve in valve guide, press correct size suction cup firmly onto head of valve, and lightly spin tool handle between palms of your hand (as if trying to start a fire) until a suitable finish is obtained; We recommend placing valve lapping/grinding compound (not included) on valve seat or valve surface (keep compound off the top surface of the valve to ensure proper suction)
  • PACKAGE CONTENTS: Package includes (2) valve lapper tools with dual ends for your convenience – Large 1-1/8-inch and 1-3/8-inch, Small 5/8-inch and 3/16-inch; Lapping/grinding compound not included
Rank No. #5
CalVan Tools 38900 Two Valve Ford Triton Tool Kit - Foolproof Repair System, Spark Plug Thread Repair Kit. Tools and Equipment
  • Designed to aide in repairing Two Valve Ford Modular Cylinders Heads. A quality, foolproof repair system that is cost effective and fast
  • High quality oversized steel alloy insert will repair other inserts that fail and has no ill effects from heat transfer
  • Total labor time as short as 25 mins, For use on 4.6L, 5.4L and 6.8 V-10 Ford Triton Two Valve Engines
  • For use on years 1996 to 2003, Part No. 389-100 Replacement Inserts
  • nsert size: m14-1.25, Patented
Rank No. #6
KIBBLEWHITE PRECI Valve Guide Seal Installation Tool Kit
  • Manufactured from high-strength 6061 T-6 Aluminum for increased durability when compared to plastic installers
  • Precision fitment onto the seal OD to help the builder center the seal
  • over the valve guide so that a few light strikes from a hammer will set the seal
  • Radiused top striking surface reduces the likelihood of a burr forming from deformation
  • Available in a kit of 4 tools for various applications or separately
Rank No. #7
KUNTEC 11 Piece Valve Stem Seal Remover and Installer Tool Kit – Pliers, Drive Handle, Sockets, Adapters
  • 11pcs Valve Seal Remover and Installer Kit--for valves in place or removed from heads on automotive, motorcycle, marine, and power sports engines.
  • Use to pull old valve seals and install new seals on overhead camshaft engines
  • 6” (15.2cm) handle and is 10.5” (26.7cm) long overall to reach narrow space; Pliers jaws are serrated for extra grip and has a 5.5” (14cm) maximum jaw opening; Knurled ends on 2” (5.1cm) adapters for tapping down the new seal and 6” (15.2cm) handles to provide extra grip
  • Package includes 1Pc valve stem seal plier + 1Pc drive handle + 2Pcs deep seal driving sockets for seals with 10.8-14.8cm diameter + 7Pcs seal driving adapters fit seals 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, and 3/8” + A carrying case
  • Constructed from alloy steel with anti-wear properties for added strength and longevity
Rank No. #8
ABN Valve Lapping Tool Kit – Valve Lapping Attachment Tool for Drill Valve Grinding Kit Small Engine Valve Lapper Kit
  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine; Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit; For use with fine grinding paste (not included)
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle; Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups; Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up; Working Speed Min. 1000 RPM; Working Speed Max. 1250 RPM
  • EASY TO USE: Clean all carbon deposits off valve and valve guide; Use a thin layer of engine valve lapping compound (not included) around the valve and install the valve in valve guide, Press correct size valve suction cup tool firmly onto head of valve, and use your power drill to slowly spin the small lapping tool until a suitable finish is obtained
  • PACKAGE CONTENTS: Package includes (1) small engine valve lapping tool attachment, (4) suction cup adapters for use with your automotive, motorcycle, ATV, and small engine valves; The small suction cup tool 20mm adapter stands at 1 inch (2.5cm), 30mm adapter stands at 1.1 inches (2.8cm), 35mm adapter stands at 1.5 inches (3.8cm), and 45mm adapter stands at 1.5 inches (3.8cm); Power drill and engine valve grinding compound not included
Rank No. #9
EWK 2 Sizes Valve Keeper Remover Installer Kit Valve Spring Compressor & Retainer Removal Tool
  • 【 Extremely Versatile 】 Special designed to remove valve spring quickly without removing cylinder head. Works on gas or diesel overhead valve engines of automobiles, motorcycles, and boats.
  • 【 Time and Effort Saver 】 No need the painful C-clamp valve spring compressor anymore! This tool fast removes and installs valve keepers on most overhead valve engines with valve stems from 4.5 to 7.5mm and 7.9 to 9.5mm.
  • 【 Smart Magnet Design 】 EWK Valve Keeper Tool has built in magnet, immediately attracts the keepers up before they dropping into the engine to avoid any potential damage. Simply push or tap the tool by hand or with a hammer to disassemble the valve set.
  • 【 Quality Guaranteed 】 Made of rust resistant material, the valve tool will not bend nor the valve spring get loosen. Ensures you a heavy duty and long-lasting tool kit.
  • 【 Best Seller on Amazon 】 Qualified ISO and TUV manufacturing process. EWK provides premium quality tools with 12 months warranty. Service and Safety guaranteed!
Rank No. #10
ICT Billet LS Valve Stem Seal Installation Tool Install Driver Tool .500 .530 LSX LS3 LS1 551913
  • Installs GM LS series valve stem seals for .500" & .530" (inner seal diameter)
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
  • Compatible with all GM LS series engines 1997-2014
  • Easy to grip handle design
  • Package Includes: 1 seal driver
SaleRank No. #11
Lisle 36050 Valve Keeper Remover and Installer Kit
  • Quickly Removes and Installs Valve Keepers On Most Overhead Valve Engines With Valve Stems From 4.5 to 7.5mm and 5/16" to 3/8".
  • Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly.
  • To install keepers, load in retainer on valve stem, then push or tap handle to install. Can be used on the car or bench.
  • New smaller size works on Toyota four cylinder and Chrysler New World Engine applications.
Rank No. #12
Orion Motor Tech 10pcs Solid Valve Spring Compressor, Automotive Compression C-Clamp Tool Service Kit for Motorcycle, ATV, Car, Small Engine Vehicle Equipment
  • EFFICIENT VALVE REMOVAL/INSTALL - Everything you need to safely remove or install valve springs, including the wide C-clamp, extension screws, and pushers with 5 collet sizes for a precise fit on almost any automotive or small engine valve spring and cylinder head.
  • DURABLE STEEL CONSTRUCTION - With forged steel construction for superior strength and hardness, this C-Clamp will not bend or twist under the stress of compressing valve springs. The smooth surface is finished with oxide to resist rust and corrosion.
  • SIMPLE OPERATION - Close the coil spring compressor until touching the center rod, and insert the compressor into the coil spring. Carefully compress the spring for removal or install and only release compression when the spring is set for install. Handle with caution.
  • TOOL STORAGE CASE - This toolset comes packaged in a high-impact, custom-molded case that holds each part securely for convenient organization and easy transport.
  • SATISFACTION GUARANTEED - If any component of the toolset is defective, the manufacturer will exchange the product or accept a return. Orion Motor Tech’s outstanding customer service team will promptly follow up with any service request.
Rank No. #13
FLAMEER Universal Motorcycle Valve Guide Drift Punch Repair Tool Hand Kit 5.5mm
  • 100% Brand new and high qaulity.
  • Valve Guide Drift Tool.
  • To be used to safely insert valve guides into the cylinder head.
  • Material: Metal
  • Length: Approx 18cm/7.09 inch
Rank No. #14
V-twin Manufacturing Valve Guide Driver Tool Set 16-0132
  • Valve guide driver tool set includes 5/16", 11/32" and 3/8" valve guide drives.
Rank No. #15
uxcell 2pcs Dark Gray Universal Valve Guide Remover Grinding Stick Lapping Tool for Car
  • Product Name: Valve Guide Remover; Material: Metal
  • Package Content: 2 x Valve Guide Remover
  • Shell Color: Dark Gray
  • Long One Size: 17.5 x 1.2cm/ 6.9" x 0.5"(L*D)
  • Short One Size: 16.5 x 1.2cm/ 6.5" x 0.5"(L*Max.D)
Rank No. #16
Orion Motor Tech Valve Spring Compressor | 10 Piece Spring Clamp Tool Kit with C Clamp, Collet Pusher Adapters, Extension Rods, and Lever for Car, Motorcycle, ATV, and Small Engine Repairs
  • 10-PIECE VALVE SPRING SET: This clamp set by Orion Motor Tech includes a wide C clamp, 3 extension rods (3" 4.4" & 4.4"), 5 collet adapters (16 19 23 25 & 30mm), and a 4-inch hand lever
  • SAFE & SIMPLE OPERATION: Instructions guide simple use, selecting the best sizes for compressing the valve springs or dealing with cylinder heads safely during removal and installation from almost any automotive, motorcycle, or other small engine
  • SOLID DURABLE CONSTRUCTION: Our C clamp and other parts are forged from carbon steel, heat treated and coated with black oxide to provide superior strength and corrosion resistance and withstand the stress of your compressed springs
  • EASY STORAGE & TRANSPORT: The reinforced blow-molded case keeps everything organized, easy to carry, and just as convenient to stow away between jobs
  • SATISFACTION GUARANTEED: Order knowing that Orion Motor Tech's usual strong warranty and friendly 24/7 customer service ensures these automotive tools and equipment will give you years of helpful service!
Rank No. #17
SCITOO Valve Spring Remover Installer Compressor Tool Kit OHV OHC Petrol, Car Engine
  • FUNCTION - It is used with Valve Spring Remover Installer still on the engine and in the car, or with Valve Spring Remover Installer removed. Tool bolts to the head while the lever pivots from the base to complete the quick removal and install of spring retaining keepers.
  • FEATURES - Forged steel construction and black finish, solid and durable. Valves are closed by pressurized air, and would not fall down into the combustion chamber.
  • WHAT YOU GET - 1PC 1 x iron pole,1 x handle, 5 x removal kit sets,1 x plastic case.
  • APPLICATION - It is applicable for OHV & OHC gas or diesel engines, which is very practical and functional, such as for Audi, for Nissan, for Honda, for Kreisler, for Mitsubishi, for Mazda, for Volve, for Porsche, for , for Toyota, ect.
  • IMPORTANT NOTE - We provide 1 year warranty for you. Make sure the car information before purchasing it,feel free to Contact us if you have any question.
Rank No. #18
AnNafi Valve Seat & Face Cutter Set/Kit - 12 Pcs Set for Vintage Cars & Bikes in Wooden Case
  • ✔️★YOUR PREMIUM QUALITY VALVE SEAT & FACE CUTTER SET BY AnNafi :- This item is made of high quality carbon steel, each cutter at the exact grade for best results, perfect for the vintage or old engine restorer. Comes with 12 cutters, 7 guides, 2 handles and 1 rod.
  • ✔️★CUTTER SIZES ARE AS UNDER:-20° Bore Cutter – 1-3/4” , 1-1/2” , 1-1/4” 30° Face Cutter – 1-3/16” , 1-3/4” 45° Face Cutter – 1-7/8” , 1-3/4” , 1-5/8” , 1-1/2” , 1-7/16” , 1-5/16” , 1-1/4”
  • ✔️★Handle:– 2 pcs. Rod – 1pc. Guides – 7mm , 8mm , 8.5mm , 9mm , 9.5mm , 10mm , 5/16”. - All Pilots Are Soft And Centered Both Ends, For Easy Reduction Of OD To Suit Your Requirements
  • ✔️★ SATISFACTION GUARANTEED :- We provide 30 Day Full Money Back Guarantee against any Manufacturing Defect . So Buy With Confidence .
Rank No. #19
DEDC 2PCS Double Ended Valve Hand Lapping Grinding Sucker Tool Kit Manual Verel Grinding Stick with Sucker Cups
  • Material: made of plastic handle + rubber suction cups; 100% Natural rubber and selected high quality plastic; Durable and good texture;
  • Size: Total Length: 22.5cm/8.86in; 20.5cm/8.07in Suction Cup Dia: 1.3cm, 1.8cm; 2.5cm,3.5cm
  • Mainly used for hand lapping valves and perfectly suitable for small and large vehicles.
  • Portable & Convenient: easy to carry out for urgent use and lightweight; Perfect size for small and large vehicles;
  • Products included: 2 x Valve Lapping Sticks; Quality & Satisfaction Guarantee;

Last update on 2021-10-09 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Valve Guide Tool Kit for our consumer to review. The reports above show ratings of the best overal, best cheap Valve Guide Tool Kit to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.