The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Traxxas Stampede Conversion of 2020 – Consumer Guide & Reviews

Rank No. #1
Traxxas Stampede 2wd XL-5 VXL CONVERSION Kit Upgrade BLACK BUMPER & SKID PLATES
  • 1-Black Front Bumper and Bumper Mount
  • 1-Black Rear Wheelie Bar Mount
  • 1-Black Front and Rear Skid Plates
Rank No. #2
Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822
  • This is a brand new Traxxas 2WD Slash chassis.
  • It includes everything seen in the pictures
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools.
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis
  • Pulled from a brand new Traxxas 2WD Slash.
Rank No. #3
Traxxas Drive Shafts for 2WD Slash, Stampede, Rustler - Assembled Pair TRA1951
  • Traxxas 2WD Drive Shaft Bundle
  • One Pair of Pre-Assembled Traxxas Drive Shafts
  • Will fit 2WD Stampede, Rustler, Slash, Bigfoot, Skully, Craniac, Monster trucks, among others
  • Bundle includes part numbers 1951, 2753X, and 4628R, assembled and ready to install
  • Hex hubs, Stub axle pins, and Wheel Nuts not included
Rank No. #4
Traxxas Center 189mm 6061-T6 Aluminum Driveshaft Green-Anodized TRA6765G
  • Traxxas 6765G - Aluminum Center Driveshaft, 189mm, Green, Rustler 4x4 / VXL
  • Features: 6061-T6 Aluminum Green Anodized
  • Includes: (1) Driveshaft
  • Specs: 189mm
  • Part number(s) included (in factory packaging): 6765G
Rank No. #5
Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue
  • Complete Low Center-of-Gravity chassis conversion kit for 2WD Slash models
  • Lowers chassis one inch (33mm/1.3in); over 45% lower battery position
  • Low center of gravity enhances handling and increases cornering speed
  • Includes chassis, lower chassis, Nerf bars (2), battery hold-down; front and rear battery retainers, and front shock springs
  • Complete kit, no additional parts required
Rank No. #6
Front Heavy-Duty driveshaft Comes Assembled and Ready to Install
  • Front heavy-duty driveshaft comes assembled and ready to install
  • Fits Slash 4X4 and Stampede 4X4 models (front only)
  • Sold as a single driveshaft
  • Includes screw pin
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles
Rank No. #7
Traxxas Upper Chassis/ Battery Hold Down Vehicle
  • Upper chassis with battery hold down
  • Fits Latrax 1/18 scale vehicles (Rally, Teton, prerunner)
  • Replaces worn or damaged parts
  • This product is made from high quality materials and designed for long-lasting performance
  • This is Replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings
Rank No. #8
Traxxas 4981X Differential Spool (eliminates differential)
  • The number one selling name ins RTR
  • Innovative design and engineering
  • Made using only the highest quality components
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
Rank No. #9
Traxxas Accessories/Tools Vehicle
  • Waterproof digital high Torque, metal gear servo with ball bearings
  • Designed for 1/10 scale Traxxas vehicles like Slash, trx-4, 4-tec 2.0, Rustler, Bandit, Stampede, E-Revo, E-Maxx, XO-1, Rally, Spartan, DCB M41, and others
  • L = 55mm, H = 42.75mm, W = 21.5mm
  • Digital high-torque 125 oz-in
  • LiPo batteries max out the potential of 1/10 scale vehicles like Slash, E-Revo, Summit, Spartan, and M41 with powerful acceleration and long run times
Rank No. #10
Pair of Traxxas Steering and Caster Blocks with Stub Axles for 2WD Slash Stampede Rustler or Bandit
  • Pair of Assembled Steering and Caster Blocks with Stub Axles
  • Will fit 2WD Stampede, Rustler, Slash, Skully, Craniac, Monster Jam trucks, among others
  • Traxxas part numbers 3736, 3632, and 3637
Rank No. #11
Traxxas 4175 Stampede Paddle Tires and Wheels Pre-Glued and Mounted (Pair)
  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle
  • Mounted to black chrome 2.8" All-Star wheels
  • Sold as a pair
  • Fits Traxxas Stampede Nitro rear or Electric front (TSM rated)
Rank No. #12
Traxxas 8935 Bumper, Front
  • Traxxas 8935 - Maxx Front Bumper
  • Features: Black in color
  • Includes: (1) Front Bumper
  • Specs:
  • Part number(s) included (in factory packaging): 8935
Rank No. #13
Traxxas Fixed Gear Adapter Vehicle
  • Fixed gear adapters take the guesswork out of setting gear mesh and ensure a rock solid hold
  • Compatible with all Traxxas 2WD models including Slash, Rustler, Bandit, and Stampede
  • Adaptor locks in the perfect gear mesh and holds the motor in position jump after jump
  • Adapters work with both brushed Titan motors and the powerful Velineon Brushless systems
  • LiPo batteries max out the potential of 1/10 scale vehicles like Slash, E-Revo, Summit, Spartan, and M41 with powerful acceleration and long run times
Rank No. #14
Traxxas 6853X Heavy Duty Rear Stub Axles (pair)
  • Plastic and steel construction
  • Includes two rear stub axles and pins
  • Replacement for worn or damaged sub axles
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!
  • This product is made from high quality materials, and designed for lasting performance.
Rank No. #15
Traxxas 5831A Lower chassis low CG (blue)
  • Traxxas 5831A - Low CG Lower Chassis, Blue
  • Features: Plastic construction Blue in color Fastens under front section of low CG chassis
  • Includes: Blue Lower Chassis
  • Specs: Length: 5.6" (142mm) Width: 3.1" (79mm) at widest point
  • Part number(s) included (in factory packaging): 5831A
Rank No. #16
Traxxas 2255 Waterproof Metal Gear Aluminum Servo Digital High-Torque 400 Brushless, Red
  • PERFECT FIT: Factory fit for drop-in installation into Traxxas Models
  • WATERPROOF: Fully waterproof, not “water resistant”
  • TSM COMPATIBLE: Compatible with Traxxas Stability Management (TSM)
  • 400 TORQUE: 400 oz-in torque at 6.0V
  • WORKS WITH MOST MODELS: Compatible with most Traxxas 1/10 scale electric models
Rank No. #17
Traxxas 3614 Front and Rear Body Mounts
  • Body mounts
  • Includes front and rear
  • Replaces damaged or worn decals
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
Rank No. #18
Traxxas 3064x Wire Harness High Current ID Connection Parallel Toy
  • ID Technology Compatible
  • Utilizes two batteries in parallel
  • Black and Red in color
SaleRank No. #19
Traxxas 3793 Slipper Clutch Shaft (input shaft)
  • Input shaft (slipper shaft)
  • Includes spring pin
  • Replaces worn or damaged parts
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
Rank No. #20
Traxxas 4928X Heavy-Duty Differential Output Yokes with Pins (pair)
  • Pair of heavy-duty differential output yokes
  • Includes set screw yoke pins, M4/10 (2)
  • Replaces worn or damaged parts
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance

Last update on 2021-01-22 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Traxxas Stampede Conversion for our consumer to review. The reports above show ratings of the best overal, best cheap Traxxas Stampede Conversion to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.