The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Toyota Crankshaft Pulley Removal Tool of 2020 – Consumer Guide & Reviews

SaleRank No. #1
Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.
  • FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8; and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ; Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase )
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability; and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines; Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley; Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty
Rank No. #2
Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.
  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998; Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase )
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability; and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement; Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley; Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty
Rank No. #3
LE-JX Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Removal Wrench Tool Compatible with Toyota and Lexus
  • Fitment - Compatible with engine model: (Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8) or (4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ) or (Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8)
  • Function - Easy to install or remove crank bolts on Lexus and Toyota engines.
  • How to Use - Used with an inch drive impact wrench and a 22 mm impact sleeve to unscrew the crank bolt. When installing the pulley, you need to bolt the pulley fixing tool to the pulley using the two bolts provided, insert the drive breaker lever into the tool, and align the breaker lever up in the engine compartment, then tighten the crank nut.
  • Material - Made of steel with high quality,resisting rust and impact.
  • Great Service Support - Our offer comprehensive pre-sales and after-sales service for this tools.If you have any questions,please contact us right now.
Rank No. #4
Sunluway Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Removal Wrench Tool Fit for Toyota Lexus
  • Fitment: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7; fit for 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
  • Application: Help to remove and install the crank bolt on engines, so the removal of extremely tight bolt is no longer a trouble
  • Superior Quality: This holding tool is constructed from high quality 40Cr steel to provide enough strength and durability; and its powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
  • Easy To Use: Use with a inch drive impact wrench and a 22 mm impact socket to spin out the crank bolt. When installing the pulley, you need to bolt the Pulley Holding Tool to the pulley with the two provided bolts, plug a drive breaker bar into the tool and orient the breaker bar up inside the engine compartment, and then torque the crank nut
  • Satisfaction Guarantee: If you're not 100% satisfied with Sunluway Holding Tool, simply return it for a full refund in 30 days. Premium Support & 12 Months’ Warranty
Rank No. #5
Yoursme for Lexus and Toyota Harmonic Damper Pulley Holder Crankshaft Crank Holding Removal Wrench Tool with 2PCS Crank Bolts
  • COMPATIBILITY: Compatible with Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
  • APPLICATION: Developed to aid in the removal and installation of the crank bolt on Lexus and Toyota engines
  • SUPERIOR QUALITY: Machined from high quality 40Cr steel, providing enough strength and durability; and its powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure
  • GREAT DESIGN: Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley. The hole in center of the tool allows access to removal of crank shaft bolt
  • SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty.
Rank No. #6
Sunluway Harmonic Damper Pulley Holding Crankshaft Crank Holder Tool fit for Toyota Lexus
  • GREAT FITMENT: Fit for Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; fit for Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7; and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • HIGH QUALITY: Made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust, protection and years of trouble-free use.
  • NICE DESIGN: Designed to hold the crankshaft pulley while loosening or tightening the centre screw. Needn't to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • USE SIMPLLY: To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2" Drive Wrench. Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt compatible with Toyota & Lexus engines.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Damper Pulley Holding Tool, simply return it for a full refund in 30 days, guarantee with 1-year's warranty.
Rank No. #7
Harmonic Damper Pulley Holding Tool Crankshaft Holder compatible with Toyota Tacoma 4Runner T100 Tundra Pickup
  • GREAT FITMENT: Fit for 4 Runner 1996-2002, T100 pickup 1996-1998, Tacoma pickup 1996-2004 and Tundra pickup 2000-2004.
  • DURABLE MATERIAL: Made of high quality metal material, solid and durable, ensures a long term service.
  • NICE DESIGN: Unique two pins design holds the harmonic damper pulley compatible with Toyota 3.4 liter V6 engines for crank bolt R&R.
  • EXCELLENT FUNCTION:Design to seat the pulley properly, holds the pulley stationary for the center bolt to be removed, necessary for both removing and installing.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with your harmonic tool, simply return it for a full refund, guarantee with 1-year’s warrant.
Rank No. #8
Univeral Cam Pulley Holder & Crankshaft Crank Harmonic Damper Pulley Holding Tool for Toyota 3.4L V6 Engine
  • The univeral cam pulley holding tool Fit for Toyota, Mazda, Nissan OHC enging and other makes. Desined to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts
  • The Harmonic damper pulley holder work on 4 Runner 1996-2002, T100 pickup 1996-1998, Tacoma pickup 1996-2004 and Tundra pickup 2000-2004. Designed to hold the crankshaft pulley in the removal and installation of the crank bolt on Toyota 3.4L V6 engines
  • Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc
  • This cam pulley tool set made of high quanlity steel. Similar to W89208
  • Make your car service job much easier and time saving
Rank No. #9
Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Compatible with Toyota
  • Designed to hold the crankshaft pulley in the removal and installation of the crank bolt on Lexus and Toyota engines
  • This damper wrench spanner allows easy removal and replacement of crank shaft bolt to factory torque specifications require up to 280 pounds of torque to seat the pulley properly
  • No need to remove radiator or other components to access and remove Harmonic Damper Pulley
  • Hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while loosening or tightening the crank bolt with a torque wrench
  • high quality-42CrMo Steel, black finish
Rank No. #10
EnRand Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder with 2pcs Crank Bolts Kits for Lexus Toyota
  • ⚙️Exclusively designed for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; And Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8; and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ;
  • ⚙️Made of high quality 40Cr steel
  • ⚙️Dsigned to hold the crankshaft pulley while loosening or tightening the centre screw, Help to remove and install the crank bolt on Lexus and Toyota engines,
  • ⚙️Package Include :1 x Harmonic Damper Pulley Holding Tool ,2 x bolts ,2 x washers.
  • At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
Rank No. #11
Harmonic Damper Pulley Holding Tool for Toyota Tacoma 4Runner T100 Tundra Pickup Crankshaft Crank Holder
  • Designed to hold the crankshaft pulley in the removal and installation of the crank bolt on Toyota 3.4L V6 engines
  • Work on 4 Runner 1996-2002, T100 pickup 1996-1998, Tacoma pickup 1996-2004 and Tundra pickup 2000-2004
  • This pulley holder allows easy removal and replacement of crank shaft bolt to factory torque specifications require up to 280 pounds of torque to seat the pulley properly
  • Hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while loosening or tightening the crank bolt with a torque wrench
  • Low profile design - no need to remove radiator or other components to access and remove Harmonic Damper Pulley
Rank No. #12
A ABIGAIL Harmonic Balancer Puller 46 Pcs Tool Kit – Flywheel Puller, Crankshaft Pulley Removal, Steering Wheel Pulling Set Pulley Yoke Crank
  • 【High Quality】A ABIGAIL Flywheel Puller is made of heat-treated carbon steel for ultimate strength and longevity, helps the tool withstand tough pulling jobs, includes a variety of screws and bolts, perfect for professional machinists.
  • 【Muti-Function】Designed to handle a range of jobs, Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle, features a steel yoke with four slots enabling use on nearly any vehicle configuration.
  • 【Complete Set】Package includes 1× pressure screw, 30 × bolts – 12 different sizes, 1× steel yoke, 2 × centering adapters, 1 × flat shaft adapter, 11 × different size washers.
  • 【Easy Storage】All-in-one Tool Set, comes in a heavy-duty blow-mold case with handle and latches for secure storage, simple organization and easy transportation.
  • 【Service】100% satisfaction guarantee, If you have any issues with the Harmonic Balancer Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
Rank No. #13
Univeral Pulley Holder & Crankshaft Crank Harmonic Damper Pulley Holding Tool for Lexus & Toyota
  • The univeral pulley holder work on Toyota, Nissan, Mazda, OHC enging and other makes. Desined to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts
  • The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ. Designed to hold the crankshaft pulley in the removal and installation of the crank bolt on Lexus and Toyota engines
  • Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc
  • This pulley tool set made of high quanlity steel. Similar to SCH64300 and W89208
  • Make your car service job much easier and time saving
Rank No. #14
for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts
  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8;
    Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty
Rank No. #15
Sunluway Harmonic Damper Pulley Holding Crankshaft Crank Holder Tool & W89208 Universal Cam Pulley Holder for Lexus/Toyota
  • GREAT COMPATIBILITY: The univeral Pulley Holder fit for many Camry, Toyota, Nissan, Mazda, OHC and many others. And the Harmonic Damper Pulley Holding Tool work on Lexus 1990-later: 3.0 L6, 3.0 t V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; Toyota 1996-later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7; and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • SUPERIOR MATERIAL: This pulley tool set crafted from high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust, protection and years of trouble-free use.The univeral Pulley Holder designed with Non-slip rubber handle.
  • EXCELLENT DESIGN:The univeral Pulley tool desined to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts. And the Harmonic Damper Pulley tool mainly used to hold the crankshaft pulley in the removal and installation of the crank bolt on Lexus and Toyota engines.
  • TIME SAVER: Similar to SCH64300 and W89208, this great holding tool kit for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Save your time and energy, but enhance effectiveness.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with our item, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty
Rank No. #16
ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel
  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm)
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal
Rank No. #17
EnRand New Version Crank Pulley Tool fit for Subaru Imprezas Foresters XT Legacy Outback Baja SVX Saab 9-2X
  • 🛠️New version design has upgraded small pin reinforcement ring for loosening the toughest crank pulley bolts
  • 🛠️Integrated low profile handle allows you to easily remove your crank pulley with the radiator still in the car
  • 🛠️Perfect for timing belt service or other engine services
  • 🛠️Removable pins allows you to remove either style crank pulley found on applicable models
  • 🛠️Comparable and can be used in place of factory tools #499977000, 499977100, #499977300, and #499977400
Rank No. #18
Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set
  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length; Bolts come in a mixture of 16, 18, 24, and 28 thread pitch
  • [Built to Last] Heat-treated carbon steel ensures maximum strength; Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience
Rank No. #19
Performance Tool W89208 Cam Pulley Holder (Nissan/Toyota/OHC/Camry/Maximas/V6)
  • For holding camshaft gears stationary on OHC engines
  • Also works on injection pump and other hears and pulleys
  • Item Package Dimension: 9.0" L x 6.0" W x 0.375" H
  • Item Package Weight: 1.0 lb
Rank No. #20
MOSTPLUS Damper Crankshaft Crank Pulley Holder Wrench Holder Removal Tool Compatible with Honda Acura Harmonic 50mm
  • MOSTPLUS 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt on most Honda and Acura engines.
  • Used with a 1/2 inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt. When servicing the engine and powertrain, it can be used for the removal and installation greatly improve the convenience.
  • The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt.
  • Used when loosening/tightening the retaining bolt
  • Detailed fitment below, pls check it before purchase

Last update on 2021-01-22 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Toyota Crankshaft Pulley Removal Tool for our consumer to review. The reports above show ratings of the best overal, best cheap Toyota Crankshaft Pulley Removal Tool to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.