The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Tiny Whoop Motor Size of 2020 – Consumer Guide & Reviews

Rank No. #1
BETAFPV 3 Sets 7x16mm Motor 19000KV Brushed Motors with JST-1.25 Connector for Micro FPV Tiny Whoop Beta65S Frame and Eachine E011 Frame Only
  • The most powerful 7x16mm motors are upgraded from 17500KV to 19000KV. We are sure that these motors will turn your micro whoop into powerful monster.
  • Weight is 2.95g per motor (including cables and connector); Size: 7x16mm
  • With JST 1.25mm 2P connector, perfect for Blade Inductrix, Tiny Whoop flight controller
  • These 7x16mm motors only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames.
  • Package: 3 SETS * 7x16mm 19000KV motors (6CW +6CCW)
Rank No. #2
BETAFPV 3 Sets 6X15mm Motor 19500KV Brushed Motor Speed Insane for Micro FPV Tiny Whoop Eachine012 or Beta65 etc
  • KV value is show on motor for pilots to distinguish the speed quickly.
  • Just fit for Eachine012, Eachine010s, Beta65 BNF etc.
  • Special Sauce Edition 19500KV / 72,000 RPM@3.7V.
  • Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug.
  • The weight of the BETAFPV 615 19500KV Motor is about 1.8g/pcs
Rank No. #3
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug
  • Speed: insane, 19000kv / 70000 rpm
  • With 1.25mm JST Plug, perfect for Inductrix FC
  • Weight: 1.8g each , Quantity: 4 pcs (2 CW and 2 CCW)
  • Insane for Blade Inductrix, Tiny Whoop, Nano QX etc
  • Shaft Diameter: 0.8mm, Motor Diameter: 6mm, Motor Length: 15mm, Cable Length: 56mm
Rank No. #4
Wolfwhoop K1 12pcs 6x15mm Brushed Motor (6CW+6CCW) 17500KV Micro JST 1.25 Connector for MQX or Micro Drone
  • 17500kv @3.7V / 64,000 rpm
  • Weight: about 1.8g/pcs, Quantity: 12 pcs (6 CW and 6 CCW)
  • Work for Blade Inductrix, Tiny Whoop, Nano QX or other micro drones
  • Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug,no soldering needed
Rank No. #5
AKK 3 Sets(12pcs) 6x15mm Motor 3.7V 17500KV TW Sauce Edition with Micro JST 1.25 Plug for Tiny Whoop Blade Inductrix
  • 6x15mm Motor (Speed: Faster)
  • Special Sauce Edition 17500kv @3.7V / 64000RPM
  • Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug
  • Weight: about 1.8g, Package: 12pcs (6CW and 6 CCW)
  • Bonus rubber rings, fit for Blade Inductrix, Tiny Whoop, Nano QX etc.
Rank No. #6
BETAFPV 4pcs 6x17mm FPV Motor 25000KV Brushed Motors for Micro FPV Tiny Whoop Beta65 Blade Inductrix Quadcopter etc
  • Suit for 65mm frame like Beta65 frame, Blade Inductrix, Tiny Whoop. Great alternative to original 6x15 motors.
  • Weighs 1.95g/pc (including connectors)
  • With JST 1.25mm 2P connector, pecfect for Blade Inductrix, Tiny Whoop flight controller
  • 6x17mm 25000KV Brushed Motors is the highest KV value for 6*17mm size coreless brushed motor for the moment.
  • Please kindly contact us before negative comment or return, we will provide technical support to solve all your product issues
Rank No. #7
BETAFPV 4pcs 0603 Motor 19000KV Brushless Motors FPV RC Motor for 1S Brushless Tiny Whoop Drone Multirotor Drone
  • 【Compatible Drone】The 0603 19000KV brushless motors are compatible with Beta65 Pro or BWhoop B06 micro racing quadcopter, gets perfect flight experience with 300mAh 1S lipos
  • 【Recommend】Highly recommend the 0603 19000KV brushless motors with 31mm props, 65 Pro frame, it will be powerful enough
  • 【Updated】The wire soldered method of 0603 19000KV brushless motor has been updated, lead wire soldered to the PCB, which allows customer to repair it easily once it is disconnected
  • 【Weight&Cable】Weighs only 1.8g/pc with connector, the lightest brushless motor of BetaFPV. All cable connectors are black, no need to distinguish between CW and CCW motors
  • 【Reliable Support】Please kindly contact us before leaving any comment or return, we will provide technical support to solve all your product issues
Rank No. #8
iFlight 4pcs XING Nano 1202 10000KV 2-3S Micro Brushless Motor for FPV Whoop Drone Frame Micro Quadcopter
  • It is super durable and ultra-light, the 1202 motors only weigh 4g with a short cable
  • 2-3S motor was customized for the CineWhoop drone, like CineBee 75HD or similar size whoop drone
  • The micro motor is affordable motors that are strong and durable
  • Shaft Diameter: 1.5mm; Stator Diameter: 12mm; Stator Length: 2mm. wire length:about 98mm.
  • Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively
Rank No. #9
4pcs 0802 19000KV Brushless Motors 1S SE0802 Micro Drone Motor for Snapper7 Mobula6 Micro FPV Racing Drone
  • Specification: 0802 motor shaft 1.0mm, weight 1.9g/pc, compatible with 1S lipo battery, suit for 65mm-85mm fpv micro quadcopter frame
  • New choice and best alternative motors of tiny whoop brushless version
  • Double E-clip design, prevent Motor bell to flying off. Good Dynamic balance
  • The upgraded 0802 19000KV brushless motors, insane power in tiny quadcopters
Rank No. #10
Augiimor 10PCS Coreless Micro DC Motor 6x12mm Mini DC Motors 3.7V 30000RPM Micro Motors for Blade Inductrix Tiny Whoop
  • 【Package Includes】: 10PCS x Coreless Micro DC Motor.
  • 【Product Feature】: Rated Voltage: DC 3V, Rated Speed: 30000RPM, Stable and reliable performance.
  • 【Wire Connection】: Red wire for connecting positive pole, black wire for connecting negative pole.
  • 【Application】: Mini DC motors are widely used on mobile phone, toys, aircraft model,RC aircraft and other electronic vibration equipments etc.
  • 【Risk-Free Guarantee】: You will get a full unconditional money back guarantee if you are not happy with this product .If you have any questions, please feel free to contact us to get the most satisfactory results.
Rank No. #11
BETAFPV Beta65S 65mm Whoop Frame Kit 3.6g V4 Version with 7x16mm 19000KV Brushed Motors Compatible with Tiny Whoop Racing
  • This Beta65S V4 version frame was modified based on the suggestion of FPV fans. The frame is made of the same material as the stock Inductrix, but more durable and lighter only 3.6g compared to the stiff V3 version which weights 4.1g.
  • The most powerful 7x16mm motors are upgraded from 17500KV to 19000KV. We are sure that these motors will turn your micro whoop into powerful monster.
  • Battery holder location is changed to a bit higher, enabling pilots to do perfect acro maneuver. And the 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear.
  • These 7x16mm 19000KV motors with JST 1.25mm 2P connector only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames and perfect for Blade Inductrix, Tiny Whoop flight controller, whose weight is 2.9g (including cables and connector).
  • The V4 version has been added the pegs again while missing canopy mounting pegs on V3 frame. So now just place the Tiny Whoop canopy and rip it.
Rank No. #12
BETAFPV Beta65S Lite Mini Drone 1S Brushed FPV Whoop Quadcopter with Lite FC Silverware Firmware M01 AIO Camera 7X16 19000KV Motor for Tiny Whoop FPV Racing
  • 【Equipment】Beta65S Lite is equipped with updated Lite brushed FC V2, M01 AIO camera, and 7x16 19000KV brushed motors. Powered by Silverware firmware, much simple and much affordable
  • 【Lite Brushed FC V2】Updated Lite FC integrates 25mW VTX, supports change VTX channel brand via control. Add LiteOSD information and OSD Menu and support firmware upgrade in DFU mode via USB port
  • 【Bayang Protocol】Built-in Bayang protocol native receiver, compatible with almost radio transmitter with deviation firmware or deviation compatible transmitter module
  • 【Supported radio transmitter】BETAFPV TX01 radio transmitter; Jumper T8SG radio transmitter; Radio transmitter of toy drone like JJRC H67, Eachine E011, etc which using the Bayang protocol
  • 【Support】Some basic guidance and typical FAQ, please check the manual at here: https://betafpv.freshdesk.com/support/solutions/articles/27000061074-manual-for-lite-brushed-fc-v2Any other problem feel free to contact: support03@betafpv.com
Rank No. #13
BETAFPV Beta65S Brushed Whoop Drone 1S Frsky FPV Quadcopter with F4 1S Brushed FC M01 AIO Camera 5.8G 25mW VTX 19000KV 7X16 Motor for Tiny Whoop FPV Racing
  • Upgrade with F4 FC brushed SPI Frsky receiver and M01 AIO FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be set as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
  • This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
  • F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver.
  • More punch on throttle with faster 19000KV 7x16mm motors and 3-blade propellers.
  • Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Rank No. #14
BETAFPV Meteor65 Acro 1S Brushless Whoop Drone Frsky with 19500KV 0802 Motor BT2.0 Connector F4 1S Brushless FC Micro Tiny Whoop FPV Acro Whoop Drone
  • 【BT2.0 Connector】The Meteor65 1S whoop drone comes with BETAFPV exclusive designed BT2.0 connector, which can support 9A continuous current and 15A burst while the PH2.0 connector just supports 4.5A continuous current. Solving the low voltage warning issue of PH2.0 connector on 1S brushless whoop when you start flying
  • 【19500KV 0802 Motor&31mm Props】Equipped with 0802 19500KV motor, the KV value is lower than racing version, which makes the flight time up to 4min. Suitable for both indoor and outdoor flight for beginners
  • 【F4 1S Frsky FC&M01 AIO Camera】BETAFPV newest and lightest F4 1S brushless FC and M01 AIO camera. It’s a perfect combo which has better performance on function for maximum weight savings
  • 【Meteor65 Frame】New marvellous design with 3.2g ultra lightweight. Compared to previous 65mm brushless frames, motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. It provides you more durable and smoother flight experience
  • 【Package&Support】Meteor65 upgrade to a kit, it is with abundant accessories of 2 lipo batteries, BT2.0 charger & tester, extra props, 1 screwdriver and the portable bag. Any problem please contact us via Email support04@betafpv.com
Rank No. #15
4pcs 300mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop JST-PH 2.0 Powerwhoop Connector
  • The weight of the 300mah 1s 30C 3.8v hv lipo battery is approx 7.70g/pcs, 0.5g heavier than the 260mAh battery.And the battery dimension is 58x13x6.5mm.
  • This tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops.
  • Compared with 260mAh HV battery, this tiny whoop 300mAh battery can get a longer flight time.
  • The battery connector is JST-PH 2.0, NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc.
  • Newly developed chemistry HV 1S Battery,huge improvement with the higher kv paired with these larger mah lipos. Longer flight times, good punch and consistent power.
Rank No. #16
BETAFPV 2pcs Beta65S V4 Version 65mm Whoop Frame Kit 3.6g Compatible for 7X16mm 19000KV Motor for Tiny Whoop Racing
  • This Beta65S V4 version frame was modified based on the suggestion of FPV fans. The frame is made of the same material as the stock Inductrix, but more durable and lighter only 3.6g compared to the stiff V3 version which weights 4.1g.
  • Battery holder location is changed to a bit higher, enabling pilots to do perfect acro manuver. And the 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Best Match of 716 19000KV motors(Not including) give this quad more power and more flight time than your regular 6mm Whoop.
  • Support Struts is strengthened to prevent them from being broken after a harsh crash. The Beta65S V4 frame is far more flexible than the stiff V3 guy.
  • The V4 version has been added the pegs again while missing canopy mounting pegs on V3 frame. So now just place the Tiny Whoop canopy and rip it.
  • Redundant design of the LED holder is removed in the V4 BETA 65S frame.
Rank No. #17
Mirarobot FPV Mini Drone Racing Tiny Whoop with 720P HD Camera Micro Quadcopter, 8.5mm Motor Powerful, High -Voltage Battery, Automatically Increase Stability BNF Version(with FUTABA Receiver)
  • 【Racing Drone】Violent 5.8G FPV flight. With DSMX/FLYSKY/FRSKY/FUTABA Receiver, Different receivers are suitable for different remote controls. Adapt the remote control you already have. Excellent performance on Crossing, Air show.
  • 【HD Top Camera】5.8G 48CH 25mW frequency 600 line resolution, make your world clearer.With VR devices, it's easier to control your drones. And you can record videos and save beautiful times.
  • 【More Cool Function】Pressure/3/6 axis mode automatically switch.Native flight control one key flip. Not only can cross the room and the corridor, but also perform to your friend.
  • 【Special Mode】Built-in barometer, sense flight altitude. Air pressure mode, you can lock the flight altitude of the drone, suitable for FPV and flight show.
  • 【Lasting and powerful】8520 motor provides strong power for violent flight. 3.8V 500mAh high-voltage battery for 6 - 8 minutes flight.
Rank No. #18
Upgraded Spare Parts Motors Propellers Props with Frame for JJRC H36 Tiny Whoop Eachine E010 Blade Inductrix Micro Drone Parts (White-Blue)
  • Quick-wear Part Spare Part For Spare parts work for JJRC H36 Eachine E010 and Blade Inductrix Micro Drone. JJRC H36 Bottom Body Shell Motors Quadcopter Frame,Propellers.
  • Spare Parts for Suitable for Eachine E010 JJRC H36 or Tiny Whoop, Ultra Durable & Light Weight. Easy for Replace.
  • Upgraded Your Drone with Good Looking.Convenience to DIY Your JJRC H36 Tiny Whoop Eachine E010 Drone.
  • Original From Factory with High Quality, Compatible with JJRC H36 Eachine E010 RC Quadcopter.
  • Package included: 4 X Motors. 4 X Propellers, 1 X Quadcopter Frame.
Rank No. #19
Rank No. #20
BETAFPV Backpack Carrying Case Blade Inductrix Storage Box with Foam Liner for Tiny Whoop Eachine E010 etc
  • This backpack carrying case bag is suitable for Tiny Whoop Beta65, Beta75, Blade inductrix, Eachine E010 etc, and 260mAh battery.
  • With strong high density foam Liner to keep your quadcopter safe and secure, and the outer case uses water-proof material
  • Compact black case for the protection of your new drone
  • Dual zip closure offers extra security for the protection of your drone
  • Includes an interior netted storage compartment for additional accessories

Last update on 2020-10-19 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Tiny Whoop Motor Size for our consumer to review. The reports above show ratings of the best overal, best cheap Tiny Whoop Motor Size to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.