The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Temperature Sensor With Spi Interface of 2020 – Consumer Guide & Reviews

Rank No. #1
Waveshare BME280 Environmental Sensor, Temperature, Humidity, Barometric Pressure Detection Module I2C/SPI Interface for Weather Forecast, IoT Projects, ect
  • Supports I2C (default), configurable slave address, supports SPI, switch to SPI via I/O setting
  • Onboard voltage level translator, compatible with 3.3V/5V operating voltage
  • Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy ±3%RH, response time 1s, delay ≤2%RH)
  • Temperature sensing: -40~85°C (resolution 0.01°C, accuracy ±1°C),barometric pressure sensing: 300~1100 hPa (resolution 0.18Pa, accuracy ±1hPa)
Rank No. #2
SparkFun Atmospheric Sensor Breakout - BME280 Measure Weather with Barometric pressure Relative Humidity Temperature Small Footprint I2C & SPI Communications Interface Operating Voltage 3.3V Low Power
  • Temp Range: -40C to 85C - Humidity Range: 0 - 100% RH, =-3% from 20-80%
  • Pressure Range: 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa
  • Altitude Range: 0 to 30,000 ft (9.2 km), relative accuracy of 3.3 ft (1 m) at sea level, 6.6 (2 m) at 30,000 ft.
  • Selectable I2C addresses through a jumper on the back of the door. Pull-ups for both I2C and SPI.
  • Solder your headers or connectors of choice to connect it to your microcontroller or project.
Rank No. #3
NOYITO K-Type Thermocouple Breakout Board MAX31855 Thermocouple Sensor Module Temperature -200°C to +1350°C SPI Interface Digital Direct Readability Temperature
  • Applicable to MKS SBASE, not applicable to other 2560 series motherboards. Measure temperature range: -200°C to +1350°C
  • Thermocouples are very sensitive, suitable for probes, K thermocouple. SPI interface, high-speed transmission
  • Direct digital output temperature value, no amplifier, no ADC. Input voltage: 3-5v DC
  • 14 bit resolution, 0.25 degree temperature accuracy.
  • Size: 20mm X 23mm; Positioning hole distance: 15mm; Diameter: 3mm
Rank No. #4
Waveshare BME280 Environmental Sensor Temperature Humidity Barometric Pressure Atmospheric Pressure Support I2C and SPI Interface Compatible with 3.3V/5V Voltage Levels
  • A tiny sensor breakout with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels. Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental Sensor is suited for applications such as environment monitoring, weather forecast, altimeter, and IoT projects, and so on.
  • Supports I2C (default), configurable slave address. Supports SPI, switch to SPI via I/O setting.
  • Temperature sensing: -40~85°C (resolution 0.01°C, accuracy ±1°C). Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy ±3%RH, response time 1s, delay ≤2%RH). Barometric pressure sensing: 300~1100 hPa (resolution 0.18Pa, accuracy ±1hPa).
  • Power consumption: <0.1mA@1Hz (H,P,T). Dimension: 27mm x 20mm. Mounting hole size: 2.0mm.
  • Onboard voltage level translator, compatible with 3.3V/5V operating voltage. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Rank No. #5
BMP388 Barometric Pressure Sensor 24-bit High Precision Altimeter Altitude Temperature Measuring I2C/SPI Interface 3.3V/5V for Raspberry Pi @XYGStudy
  • Part Number: BMP388 Barometric Pressure Sensor
  • This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.
  • Due to its ultra small form factor, low power consumption, low noise and high precision, the BMP388 Barometric Pressure Sensor is suited for applications such as drones, accurate altimeter, environment monitoring, and IoT projects, and so on.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Rank No. #6
uxcell BMP280 Pressure Temperature Sensor Module Digital Breakout Humidity Sensor with IIC I2c 3 Pack
  • BMP280 sensor module can pressure and the temperature
  • BMP280, the precision sensor is soldered onto PCB, both I2C and SPI interface
  • With an I2C connection you have access to enough weather data
  • Great new chip which was originally designed for the next generation of smartphones.
  • Made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings
SaleRank No. #7
Exploring Raspberry Pi: Interfacing to the Real World with Embedded Linux
  • Wiley
  • Molloy, Derek (Author)
  • English (Publication Language)
  • 720 Pages - 06/13/2016 (Publication Date) - Wiley (Publisher)
SaleRank No. #8
Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First
  • One of the best performing mic preamps the Scarlett range has ever seen, now with switchable air Mode to give your recordings a brighter and more open sound. One high-headroom instrument input to plug in your guitar or bass. Two hum-free balanced outputs provide clean audio playback.
  • High-performance converters enable you to record and mix at up to 24-bit/ 192kHz.
  • Quick start tool to get up and running easier than ever.
  • Includes Pro Tools | First Focusrite Creative Pack, Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 3-month Splice subscription, and your choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration
  • LIMITED TIME OFFER: One year of completely FREE distribution of your next single with TuneCore!
Rank No. #9
Govee WiFi Thermometer Hygrometer H5179, Smart Humidity Temperature Sensor with App Notification Alert, 2 Years Free Data Storage Export, Remote Monitor for Room Greenhouse Incubator Wine Cellar
  • Two Ways to Connect: Easily monitor temp and humidity data in real time from anywhere. With stable WiFi and Bluetooth connection via the Govee Home app, you'll have more opportunities to react to changes in your air quality (not support 5G WiFi).
  • Fast & Accurate: Equipped with a Swiss made sensor, this humidity gauge provides precise readings. Temperature is accurate to ±0.54℉/±0.3℃, and humidity is ±3%RH. By refreshing every 2s, you'll stay regularly updated. Now supports widget function.
  • Alert Function: Set preset temp and humidity ranges, and receive an app alert immediately whenever levels fall out of that range. This function helps you react faster to sudden changes in your basement, baby room, etc. Only supports Bluetooth settings.
  • Free Data Storage & Export: Our room humidity meter uploads data to the App when connected via Bluetooth or WiFi. Enjoy 20 days of online data storage view and export up to 2 years' worth of data seen through clear historical trends and graphs.
  • Easy to Place: With the lanyard loop, you can easily place this indoor temperature gauge anywhere. Package contents 1 x Govee Temp Humidity Gauge, 1 x Lanyard Loop, 1 x User Manual.
Rank No. #10
Gikfun DS18B20 Temperature Sensor Waterproof Digital Thermal Probe Sensor for Arduino (Pack of 5pcs) EK1083
  • Power supply range: 3.0v to 5.5v
  • Output lead:red (VCC), yellow(DATA) , black(GND)
  • length:Approx.100 cm
  • No other components, unique single bus interface
  • Widely applications: thermostatic controls, industrial systems, consumer products, thermometers, any thermally sensitive system, etc.
Rank No. #11
SUBALIGU BME280 Environmental Sensor, Temperature, Humidity, TSL25911 Barometric Pressure Detection Module I2C/SPI Interface for Weather Forecast, IoT Projects, ect
  • Supports I2C (default), configurable slave address, supports SPI, switch to SPI via I/O setting
  • Onboard voltage level translator, compatible with 3.3V/5V operating voltage
  • Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy ±3%RH, response time 1s, delay ≤2%RH)
  • Temperature sensing: -40~85°C (resolution 0.01°C, accuracy ±1°C),barometric pressure sensing: 300~1100 hPa (resolution 0.18Pa, accuracy ±1hPa)
Rank No. #12
[Military-Grade Magnetometer Compensation Chip] PNI RM3100 High-Accuracy Magnetometer Geomagnetism, Magnet Field Sensor, SPI Interface, High-Revolution Electronic Compass Module for Arduino
  • 【 High Performance 】Rock-solid data output: 3-axis magnetic field, built-in Magli2c 13156 sensor + 13101 sensor + 13104 sensor + 13104 sensor
  • 【 Robust Design 】 Magnetic field measurement range: ±800uT, Low power consumption, fully compliant with RoHS standards
  • 【 Low-noise Level】 15 nT@200 cycle count, High-resolution: 13 nT@200 cycle count
  • 【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the guiding card inside the package. Option 2. search wit-motion(dot)com and download the complete tutorial. Option 3. contact us if you need any help, support (at) wit-motion (dot) com
  • 【 What you get 】1*RM3100 Magnetometer sensor, 1 x Welcome guide
SaleRank No. #13
ACDelco Professional 213-4514 Engine Coolant Temperature Sensor
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
Rank No. #14
MakerFocus TFT LCD Screen Display 1.3inch TFT LCD Module, 240240 IPS 65K Full Color 3.3V with SPI Interface ST7789 IC Driver, 51 STM32 Ar duino Routines for DIY
  • User Manual: Please get the link from the product guide and description below
  • 1.3inch TFT LCD Screen Display Module: The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately controlled.
  • Dot Size: 240*240 ( There are two display way: horizontal display and vertical display, you can adjust the display direction. )
  • Working Voltage: 3.3V; Working temperature: -20-70℃; Interface: SPI Interface; IC Driver: ST7789; Viewing direction: IPS; Display area Size: 23.4*23.4mm; TFT Module Size: 27.78* 39.22mm
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
Rank No. #15
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
  • Driver element: a-Si TFT active matrix
  • Resolution (dots): 240RGB*320Dots
  • Viewing Direction: 6 o’clock
  • Pixel arrangement: RGB vertical stripe
  • With PCB plate (including power supply IC, SD), compatible with 5110 interface
Rank No. #16
Ring Alarm Flood and Freeze Sensor
  • Ring Alarm Flood and Freeze Sensor protects your home from flood and water damage. Get alerts on your smart phone when water or low temperatures (below 40°F / 4.4°C) are detected
  • Easy setup in minutes—without tools or professional installation. Requires Ring Alarm Security System (sold separately).
  • Manage Ring Alarm Flood and Freeze Sensor and other Ring products with the Ring app.
  • Battery life 3 years max. Batteries are replaceable.
Rank No. #17
M-Audio M-Track Solo – USB Audio Interface for Recording, Streaming and Podcasting with XLR, Line and DI Inputs, Plus a Software Suite Included
  • Podcast, Record, Live Stream, This Portable Audio Interface Covers it All – USB sound card for Mac or PC delivers 48 kHz audio resolution for pristine recording every time
  • Be ready for anything with this versatile M-Audio interface - Record guitar, vocals or line input signals with one combo XLR / Line Input with phantom power and one Line / Instrument input
  • Everything you Demand from an Audio Interface for Fuss-Free Monitoring – 1/8” headphone output and stereo RCA outputs for total monitoring flexibility; USB/Direct switch for zero latency monitoring
  • Get the best out of your Microphones - M-Track Solo’s transparent Crystal Preamp guarantees optimal sound from all your microphones including condenser mics
  • Whether you’re a Podcaster or Beat Maker, this software suite won’t disappoint - Includes: Pro Tools, First M-Audio Edition, MPC Beats, Xpand!2, Eleven Lite guitar amp plugin and 20 AVID plugin FX
Rank No. #18
Govee Bluetooth Digital Hygrometer Indoor Thermometer, Room Humidity and Temperature Sensor Gauge with Remote App Monitoring, Large LCD Display, Notification Alerts, 2 Years Data Storage Export, Black
  • Smart Features: The Govee Wireless Thermometer Hygrometer supports all basic functions as well as smart functions such as remote monitoring and temp humidity graphs. Our humidity meters are reliable and easy to use for homes, greenhouses and more.
  • Higher Accuracy and Faster Refresh Time: With the Swiss-made smart hygrometer sensor, the temperature is accurate up to ±0.54°F while the humidity is ±3%RH, a 40% increase. A 2 second refresh times makes it 500% faster than our competitors.
  • Upgraded Display: This room humidity gauge is easy to read due with a 3-inch bright LCD screen with large numbers. The max/min temp humidity records and the comfort indicators (dry/comfort/wet) will keep you aware of the indoor humidity at any time.
  • Smart App Alerts: You'll receive an instant alert once the temperature or humidity is out of its preset range. Know the status of your wine cellar, freezer, refrigerator, basement, plant nursery or other areas, even when you're not beside the device.
  • Free Data Storage: Make plans according to historic temp and humidity data. The 20-day curve graphs provide a clear data-changing track. You can export data from the past 2 years and convert it to a CSV format. Stay on track of your daily routine.
SaleRank No. #19
Smart Siren Alarm, LOUD 110 dB Sounder, Wireless Alarm for Home Security/Intrusion/Burglar Alarm, Panic Alarm, Audible Alerts, Remote Control, Works with Alexa, Google Assistant, IFTTT - Hub Required
  • World's Longest Wireless Range: Powered by LoRa technology, the long-range yet low-power system offers the industry’s longest receiving range in the market (1/4 mile). Our long-range coverage enables its use in areas challenging for most residential Wi-Fi systems, such as basements, outdoor porch/patio areas, sheds, free-standing garages, even remote outbuildings on your property.
  • Economical and Powerful Siren: This economical wireless and portable LOUD 110 dB smart siren adds audible and visible alarms to your existing YoLink system or can work alone as a panic alarm (YoLink Hub required, not included). Add an attention-getting siren to your system to immediately notify you of water leaks/flooding, door and window status changes, and high/low temperature or humidity conditions, allowing you to respond quickly to critical events, protecting your family and your property.
  • Simple & Easy! YoLink’s Scan & Play smartphone app feature will have your siren up & ready in just a couple minutes! And the Siren Alarm could not be easier to install: just add it to the app, and place it on any stable surface or mount it to the wall with a screw or nail, for a more permanent installation. Done! Begin using your siren and enjoy security and peace of mind, knowing your family and property are protected.
  • Team Me Up! The Siren Alarm can be used as a stand-alone panic alarm (YoLink Hub required) but team it up with a Door/Window Sensor, or with a Water Leak or Temp Humidity Sensor and you’ll have an economical yet effective home & property protection system. YoLink app provides you with emails, text messages and phone banner alerts, tailored to your needs, but the Siren Alarm’s loud (100 to 110 decibel) sounder can be heard from a distance and gets immediate attention, with or without your phone
  • Doesn't Work without YoLink Hub: YoLink Hub is the only central controller for YoLink devices, and it connects YoLink devices into the internet and the cloud. Without YoLink Hub, this smart siren does not work with YoLink app and does not support 3rd-party integration with Alexa, Google Home and IFTTT. Please search B07TQLKQLJ for the hub or try our Smart Home Starter kit B07V246GCX
SaleRank No. #20
Temp Stick Wireless Remote WiFi Temperature & Humidity Sensor. No Subscription or Monthly Fees. 24/7 Monitoring, Alerts & History. Free iPhone/Android Apps, Made In America. Monitor Anywhere, Anytime!
  • Remote WiFi temperature and humidity monitor with NO MONTHLY FEES. 3 year warranty; the last sensor you need! MADE IN AMERICA.
  • Sends TEXT MESSAGE and EMAIL ALERTS for high/low temperatures, humidity levels, WiFi connection loss and low battery.
  • Superior 1 year (+) battery life! Completely wireless, battery operated sensor (AA batteries included). No gateways or wires needed. Check-in remotely from anywhere, anytime using your mobile, tablet or PC. Connects to your WiFi and monitors temperature and humidity in your home, refrigerator/freezer, walk-in cooler, wine cellar and much more.
  • Detailed data logging with unlimited history. Accurately monitor conditions 24/7.
  • Free email support and we answer the phone 7 days a week! Fast, knowledgeable assistance. Proudly Made in the USA. Support American manufacturing & ingenuity.

Last update on 2021-10-09 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Temperature Sensor With Spi Interface for our consumer to review. The reports above show ratings of the best overal, best cheap Temperature Sensor With Spi Interface to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.