The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Surf Rod Holder For Jeep of 2020 – Consumer Guide & Reviews

Rank No. #1
Booms Fishing VRC Vehicle Rod Carrier, Car Fishing Rod Holder, 2 Nylon Straps Adjustable Range 31.5"-59", Fishing Pole Roof Rack Store 5 Poles Max
  • [ INCREASE ROOM ] Hold rods in place, plenty of room for your other gear and dogs
  • [ SAFELY STORED ] Keeps rods up out of the way, no tangles and interference
  • [ HIGH-CAPACITY ] Hold up to 5 rod and reel combos, readily available
  • [ READILY INSTALLED ] Attach to four handlebars, no drilling or screwing into vehicle
  • [ ADJUSTABLE LENGTH ] Adjust from 31.5" to 59.1", fits most vehicles with a hatchback
Rank No. #2
Extreme Max 3005.4275 Aluminum Pivoting Fishing Rod Holder for 2" Hitch Receivers - 6-Rod Capacity
  • Store up to 6 fishing rods on your vehicle's 2" receiver
  • Each tube fits one rod up to 1-5/8" diameter
  • Holder pivots into three different positions to store your rods vertically, angled away from your vehicle, or simply out of the way of your opening tailgate
  • Soft-touch vinyl cap prevents any scratching or other damages caused by road travel
  • Hitch pin not included
Rank No. #3
Vehicle Fishing Pole Holder,2 Strap Adjustable Nylon Car Fishing Rod Rack Holder Straps Roof Rack Fishing Rod Carrier for Car, SUVs and Vans
  • 🌫【Vehicle Fishing Pole Holder】86.61 In Length ; 1.5 In Width ; The package including : two fishing rod rack strap. 💦
  • 🌫【5 rods and Safely Storage】Car fishing rod rack holder is designed to store fishing rods specifically for fishing men. Fishing pole can be firmly held, organized and protected in the car, which is convenient for transportation and easy to place and take out, to avoid tangling or breaking. 💦
  • 🌫【Save Space】Fishing rod roof rack will save a lot of car interior space. With the pole stand, the fishing rod will be neatly stored in the car and not fall into chaos. Perfect suitable for SUV, Wagons, Truck and Vans. 💦
  • 🌫【Adjustable Straps】Innovative pole rack system. Truck fishing pole holder can hold 5 pcs fishing rod and reel combine. Its length can be adjusted according to the width of the vehicle, from 41 inches to 62 inches. 💦
  • 🌫【Attention】If you do not have FOUR HANDLEBARS , you could purchase and affix suction cups to hold the strap. please make sure the suction cup is very strong. Make sure everything is held tightly before you drive. 💦
Rank No. #4
Brocraft Hitch Mount 6 Pole Rod Holder/Hitch Fishing Rod Holder/Truck Rod Rack
  • Made by marine grade T6 aluminum with CNC processing, Welding
  • Silver anodized finish,
  • Fits Standard 2" Receiver - (Pin not included)
  • Swings Down to Allow For Tail Gate and Baiting
  • 6 Fishing Rod Holder
Rank No. #5
Tight Line Enterprises Magnetic Fishing Rod Racks for Vehicle (Truck or SUV) with Ferrous Metal Hood and Roof
  • Made in USA - rugged injection molded nylon construction with durable 1/4 inch bungee cord securely tie downs up to 4 fishing rods with reels or even large surf rods.
SaleRank No. #6
Perfect Fit Belt Clip Badge Holder with Pocket and Chain for Phoenix Detective (Cutout DK396)
  • Fits only the Phoenix PD sergeant or detective full sized badges
  • Made in the USA by Perfect Fit with their proud stamp right on the steel clip
  • Includes a neck chain and steel belt clip
  • Cutout number DK396 is 2.75 inches tall by 2 inches wide
Rank No. #7
KastKing V10 Rod Rack with Line Spooling Station, Wall Mounted Fishing Rod/Combo Rack, Holds 10 Combos, Fishing Line Spooling Tool for Spinning and Casting Reels(2pcs Line Boss Included)
  • Key Features – Unique patent pending design - Spool fishing line on spinning reels and casting reels without fishing line twist – adjustable line spooling tension bands ensure that line is spooled tightly on the reel - works with monofilament, fluorocarbon, and braided fishing line – fishing rod storage for up to 10 rods or combos in only 17” of wall space – store fishing line spools – includes shelf storage for fishing pliers, line cutters, fishing tools, and more!
  • PATENT PENDING LINE SPOOLING TOOL– The innovative KastKing patent pending line spooling station is simple to use and will spool spinning reels and baitcasting reels without any line twist. The built-in line spooling tool can be mounted to the rod rack for spooling reels or placed in the storage position when not in use. Its compact size uses very little space. Made with non-rusting ABS materials.
  • NO LINE TWIST – The KastKing V10LS line spooler design is simple to use. To spool a casting reel, the line comes off the top of the filler spool and winds directly onto the top of a casting reel without changing the coiled memory of the line. For spinning reels, the line is un-coiled from the filler spool and coiled directly onto the reel spool in the same fashion. The line naturally coils onto the reel spool with zero fishing line twist.
  • SPOOLING MADE EASY – Place a Line Boss tension band on a spool of line, mount the spool to either the metal spool shaft for casting reels or to the spooling fixture for spinning reels. Then attach the fishing line to the reel spool and crank the handle to fill your fishing reel with your favorite fishing line. Instruction cues are molded into the tool as a quick reference to ensure your setup is correct for spinning reels.
  • STORE COMBOS & GEAR – V10LS KastKing rod racks and line spoolers have a unique curved design and adjustable cups allowing staggered reel height for minimum storage space of your fishing combos. The upper rod rack metal shaft offers spool storage and an integrated storage shelf to help manage fishing gear such as fishing pliers or line scissors. KastKing also included two Line Boss tension bands to assist with spooling reels and to help manage the line on your leader and filler spools.
Rank No. #8
YAKIMA, ReelDeal Rooftop Fishing Rod Mount, Carries Up to 8 Fully-Rigged Rods
  • Angler’s choice: The ReelDeal fishing rod mount securely carries up to 8 fully-rigged rods of just about any style or length on your roof rack, instead of in your vehicle
  • Smart and secure: 15.5 inches of full-length padding holds your rods in place, keeping them safe on the way to your favorite fishing hole
  • Easy to install: Tool-free clamp design makes install and removal a breeze
  • Simple loading: Single-button access makes loading and unloading a breeze; Integrated SKS (Single Key System) locks included for added security
  • We’ve got your back guarantee: Covered by our Limited Lifetime Warranty
Rank No. #9
Ogrmar 2PCS Fishing Rod Holder Rod/Ship Yacht Fishing Rod Frame Portable Lightweight and Durable (White)
  • Material: ABS Plastic. 
  • Size: Height: 12”, width: 2”, Inlet diameter: 2.4”.
  • Easy to install and remove.
  • Durable ABS plastic to withstand the harsh marine environment.
  • Best Service: We believe in the quality of our products, if you have any problems , please feel free to contact us.
SaleRank No. #10
Sea-Dog 325039-1 Three-Pole Side Mount Rod Holder - Black
  • Injection molded polypropylene construction
  • Easy installation
  • No assembly required
  • Built-in knife, pliers and lure holder
  • Holds rods up to 1-3/4” in diameter
Rank No. #11
RAILBLAZA Rod Holder R with MiniPort Track Mount Kayak Rod Holder Track Mount
  • RAILBLAZA Rod Holder R for spinning reels, bait casting reels or fly reels
  • Lightweight but strong with fiberglass reinforced plastic
  • The possible rotation of 360 degrees
  • The MiniPort has a compact design & completely tool-less operation
  • Compatible with all a kayak tracks
Rank No. #12
iMunir Adjustable Vehicle Fishing Rod Rack,Fishing Pole Holder Strap Belt Storage for Truck,Vehicle,SUVs Wagons and Vans (Black)
  • [Application] This Car fishing pole holder designed to solve the storage and transportation problems of fishing rods,Hold, organize and protect your fishing rods securely inside vehicle,Transport rods conveniently, prevent them from tangled or getting broken.
  • [Adjustable] 5 rods and reels combo capacity, this car fishing rod rack adjustable from 31 inch to 61 inch.Applies to vehicles with four handlebars on top.Attach to the second and third row grab handle, works great for Car,SUVs,and Vans or such with 3 rows.
  • [High Quality] High strength nylon material belt with snap buckle, easy to placed, no drilling required of the Vehicle fishing rod rack.
  • [Good Helper] Excellent way of managing space. Fishing Rod Roof Rack saved a lot of room in the back. With rod rack, the car wouldn’t have been in a mess in the back of it.
  • [Attention] If you do not have FOUR HANDLEBARS , you could purchase and affix suction cups to hold the strap. please make sure the suction cup is very strong.
Rank No. #13
River Quiver Fly Rod Roof Rack (2-Banger Silver 10'4)
  • Versatile mounting system
  • Able to withstand shock, wind &, impact loads
  • The most secure rear entry molded reel box fly rod holder available
  • Aerodynamic and quiet
  • Designed, assembled, and shipped from Boulder, CO
SaleRank No. #14
I'd Rather Be - Funny Novelty Socks Stocking Stuffer Gift For Men and Women (Fishing Lures)
  • YOU’D RATHER BE FISHING - You don’t have to tell your boss, let your socks do the talking! The geometric fishing lures pattern blends right into the office in stylish colors that’ll have you looking sharp for any situation. These socks sport a hidden message on the cuff: “I’d Rather be Fishing”
  • ONE SIZE FITS MOST - Unisex design fits US mens sizes 6 to 13. Luxurious knit cotton will keep your feet cool and comfortable all day long. Crew length, Dress style socks for Men and Women. Try them on and you’ll be hooked!
  • THE PERFECT GIFT IDEA - A fantastic present for fishing enthusiasts, a gag gift for your boss, for fathers day dads and grandfathers, outdoors lovers, or Christmas stocking stuffers for the fisherman or woman in your life. Gone fishing? Pack a pair in your cooler and surprise your fishing buddy! These socks make for an amazing Secret Santa or White Elephant gift exchange idea that is sure to get some laughs!
  • MACHINE WASHABLE - Our Socks Will Hold up to Years of Washes and Will Stay Colorful, Soft, Comfortable, and Well Fitting. These may be novelty socks, but they don’t feel cheap! We’ve Tested Them, and we love them like crazy!
  • SUPER COMFORTABLE SOCKS: These novelty socks are sure to become an everyday favorite! They are made from a soft and luxurious cotton blend, which allows them to stretch comfortably, and gently hugs the legs and feet without bunching.
SaleRank No. #15
Berkley BAVRR Vertical Rod Rack, Black, 6 Rod
  • Fishing rod rack safely stores up to 6 rods
  • Foam grip pads hold rods neatly and securely
  • Power disk system
  • Durable yet lightweight plastic design
  • Corrosion proof for long lasting use
Rank No. #16
Rush Creek Creations 12 Fishing Rod Tackle Cart - 5 Minute Assembly, Black (40-0001)
  • Highly functional tackle storage cart that accommodates up to 12 fresh water rods
  • Adjustable middle wire shelf and smooth rolling casters allow room for your favorite fishing gear
  • Carbon fiber weave on base and top boards provide stability and durability
  • Powder coated steel frame resists scratching
  • Included components: Instruction Manual
Rank No. #17
All Rite Products Double Spinning Rod Holder up to 1 ¼” inches in diameter for ATV, UTV, Snowmobile, Bike - Model CR2X
  • SPINNING ROD HOLDER - Carries 2 spinning rods with a standard ½” wide reel stem (does NOT fit surf or baitcaster rods)
  • SIZE – Fits rod handles up to 1¼” in diameter, and the holder is 6” long
  • TWO-WAY BLOCK – Fits any tubular/square bars or railings from ⅝” to 1¾” with two-way block; Patented micro grooves on the bottom of the mounting block keeps the base from slipping or twisting
  • UNIVERSAL - All hardware included to mount to either an ATV, UTV or snowmobile; Can also be attached directly to the rear axle of a bicycle if space permits
  • EASY TO INSTALL - Just attach the mounting block with the included u-bolts, then simply attach the rod holder and you are ready to go
SaleRank No. #18
HURRICANE HSSP-27 Tubular Sand Spike 27'
  • Item Package Dimensions: 16.256 L X 16.51 W X 121.92 H (Cm)
  • Product Type: Fishing Equipment
  • Item Package Weight: 0.953 kgs
  • Country Of Origin: China
Rank No. #19
BigTron Fishing Rod Holder Bracket, Tube 3 Rod Rack, Kglobal, Fishing Rod for Boat Kayak Garage Storage or Truck with Screws Side-Mount (Black)
  • High quality propene polymer material,highly durable and environmentally friendly
  • Perfect designed for freshwater and saltwater use
  • Protects your favorite rods from damage during transport or storage
  • Excellent for where flush mount or rail mount rod holder can not be installed,Mounts directly on your boat, truck or wall
  • No Pin inside of tube,made of plastic material
SaleRank No. #20
SeaSense Single Piece 3 Rack Rod Holder, White
  • Single Construction
  • All-In-One Design
  • Easy Installation
  • Mounting Hardware Included
  • 17-1/4" x 1-3/4" x 6-9/16" x 12"

Last update on 2022-01-14 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Surf Rod Holder For Jeep for our consumer to review. The reports above show ratings of the best overal, best cheap Surf Rod Holder For Jeep to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.