The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Stay Open Spring Door Hinge of 2020 – Consumer Guide & Reviews

Rank No. #1
Gazeer 6 Pcs 100N/22.5lb Gas Strut Lift Support Cabinet Door Lift Pneumatic Support
  • Force:100N/22.5lb (Per Strut);Length: 11.22 inch
  • Round metal mounting plate, contact with the counter area is larger, three-point positioning, installation more solid. Full copper oil seal, full buffer design, solid design to ensure long-term use is not deformed, not rust.
  • Gas Springs are ideal motion control devices for lifting, holding, counter balancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies. Suitable for cupboards, bookcases, wardrobes, windowsill or platform etc,upside support.
  • Please do not use lubricating oil or similar things.it can interrupt the reaction of the Braking Arm. Please put the fixing plates well-aligned on the stuff.
  • Package included: 6 X 100N Gas Struts and 30 X Screws
Rank No. #2
RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install
  • STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
  • LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
  • EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Rank No. #3
2 Pcs 18lb /80N Hydraulic Gas Strut Lift Support Cabinet Hinge Kitchen Cupboard Door Gas Spring Door Shocks Cabinets Hinges
  • Pressure:18lb (one Strut),Load Bearing:80N; Compressed Length:7"; Extended Lenghth:10".
  • FIittings: one S trut with 5 screws to fix bracket and Manual included
  • Made of circular metal mounting plate, Satin silver finish, designed for three screw holes, the installation is more firmer.
  • The lift up gas support is suitable for cabinet, cupboard,furniture door and so on
  • Support opens lids to a maximum angle of 90 degrees
SaleRank No. #4
Deltana DSH35R515 Single Action Steel 3 1/2-Inch x 3 1/2-Inch x 5/8-Inch Spring Hinge
  • Item Weight: 0.8 lb
  • Country of Origin: China
  • Brand name: Deltana
  • Item Dimensions: 3.5"L x 3.5"W x 1.0"H
Rank No. #5
2 PCS Qrity Flap Stay Damper Gas Spring, 150N/33lb, Only Open Down The Door, Gas Springs Hinge Slow Down Drop Leaf, Kitchen Cabinet Cupboard Door Hinges
  • Effortless opening of doors and lids. Softer and quieter closing. Smooth motion and stopping.
  • Secure holding in open and closed positions. Easy to mount/install. Maintenance free.
  • Force:150N/33lb (Per Strut); Length: Open - 11.4 inch; Close - 7.9 inch. If it is too strong for your cabinet, please use one spring for one cabinet.
  • Compact and attractive design. Opens to 90 Degrees. One pair does one door.
  • Package Included:2 X Qrity Cabinet Door Lift Pneumatic Support; 10 X Screws.
Rank No. #6
2 Packs [Upgraded] Qrity Cabinet Cupborad Furniture Door Lift Stay Support Hinge Damper - Support Up to 20KG - Opening Angle 75°/90°/110° - Come with Hex Key
  • Each Lid Stay can be used for Right or Left Hand Mounting.
  • Suitable for lids or flaps when a soft closing motion is required.
  • Three options of opening door angle - 75, 90 and 110 degree.
  • Can hold door weights of up to 40kg - Pair of Lid Stays (up to 20kg - 1 Lid Stay).
  • Fully adjustable for different weights by turning a screw at the middle of the arm to setup correct friction pressure(Hex Key included).
Rank No. #7
Douper 100N/22lb Gas Spring Hinge Slow Down Drop Leaf of Cabinets Desks Slowly Open Drop Leaf Pack of 2
  • SPECIALLY DESIGNED FOR DROP LEAF--The hinge will work perfectly if your drop leaf weighs less than 22lbs. It is not used for supporting lid or keeping it stay.
  • STURDY GAS SPRING—Pressure: 100N/22lb. Suitable for: 16-22lb drop leaf. Made of solid brass and iron, sturdy gas spring helps to lower the lid softly and close it easily. With Chrome plated, it is durable and corrosion-resistant.
  • SOFT DROP-DOWN—It is designed to damper the drop-down rate of a drop leaf, such as that of cupboard, cabinet and shoebox, and prevent quick and dangerous closure.
  • EXTEND AUTOMATICALLY-- Overall length: 7.9in (compressed) to 11.4in (stretched). Travel-3.5in. The space-saving hinge will extend automatically as you pull the lid open, and will not get in the way.
  • EASY TO INSTALL by following the instructions
Rank No. #8
DerBlue 4 Pcs 100N/22.5lb Gas Strut Lift Support Cabinet Door Lift Pneumatic Support
  • 1. Force:100N/22.5lb (Per Strut);Length: ( hole center to hole center) :10.5 inch,Support opens lids to a Maximum angle of 100 degrees.
  • 2.Easy to install, durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.suitable for all types of overhead Cabinet,Doors,Box.
  • 3.The product comes with a detailed paper installation manual, please read carefully before installing the product.
  • 4.Package Included:4 X Cabinet Door Lift Support;8 X Metal fixing brackets ,20 X Screws ;Installation Manual .If you do not find Screw, please contact us to resend you.
  • 5. Quality Assurance : If the product is defective, we can promise to resend a set of products; if the product does not meet your needs, we can also provide a 90-day unconditional return application; if you have other questions, please feel free to contact us by email!
Rank No. #9
Sugatsune SDS-C100/WHT Soft-Down Stay, Umber
  • Lids lower gently
  • Support opens lids to a maximum angle of 105 degrees
  • Ideal for installing in tight places
  • Nickel plated steel arms.It is designed to operate at room temperature between 0 to 40 degree C
  • Compact design
Rank No. #11
2Pcs 200N/45lb Gas Strut Gas Spring Lift Support Cabinet Door Lift Pneumatic Compatible Universal Kitchen Cabinet Hinges Hydraulic Cabinet Hinge Support Door
  • Material: Made of durable and sturdy Zinc alloy in Satin Nickel with maximum corrosion resistance and durability the lid stay hinges guarantee high performance.
  • Powerful Strut: Your Gas Springs are powerful, prop open any medium to heavy object such as a car lid or barrier for hands free convenience, with easy fittings to any surface just attach, lift and your gas spring lifts and holds open any medium to heavy object.
  • Keep Lid Hinge Stay Opening: Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, butt hinges.
  • Easy Fit And Removal: Your gas springs come with 2 L-plates each at top and bottom with 4 screw holes and screws included, simply screw into any soft surface or pre drill a guide hole in any tough surfaces like wood, metals. The High quality materials included mean your screws can easily be fit and removed for any adjustments.
  • Widely Used: Most suitable support weight is around 45 pounds; Besides as the replacement struts on platform bed, customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
SaleRank No. #12
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2
  • GENTLY CLOSE DESIGN -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers
  • HOLDS LID OPEN -- These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open
  • STRONG ENOUGH -- Douper 200N heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges (60lbs/ 2pcs)
  • 75°-105° OPEN ANGLE -- Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board.
  • WARM TIPS -- Douper hinges will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance. Hinges will not work if your lid doesn’t match specified dimension and weight requirement
Rank No. #13
NAIERDI [4 Pack] Lift Support,Gas Strut,Soft Close Hinges,100N/22lb Gas Spring, Lid Support, Kitchen Cabinet Hinges, Toy Box Hinges, Gas Shocks
  • 100N GAS SHOCKS: Bearing weight: 100N / 22lb (Per Strut), 4 struts included. Length (hole center to hole center) :10.63 inch, Travel length: 3.62 inch.
  • SOFT CLOSE HINGES: This lid hinge can help open/close your kitchen overhead cabinets or toy box slowly to prevent from slaming or bumping.
  • STABLE & RUST PROTECTION: Quality hinge head and better piston make lid support bracket work steadily. Copper core and zinc plating prevent it from rusting. Complete with fixing screws and installation diagram so you can install it with no effort.
  • APPLICATIONS: This gas spring lift is suitable for various kitchen cabinets, toy box, trunks and rv cabinets and so on.
  • 1 YEAR QUALITY WARRANTY: NAIERDI offers 1 year 100% satisfactory warranty. If there's a product quality issue or installation problems, please feel free to contact us. We will refund or replace your order to provide a best solution!
Rank No. #14
RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Hinge with Soft-Down for Door Cabinet Kitchen
  • LID STAY HINGE FOR DOWNWARDS OPENING DOOR--Designed for downward opening lid door ( Bureaus, buffets, wine glass cabinet) with concealed, piano or butt hinges. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Lid stay support built-in hydraulic dampening device.
  • STURDY LID STAY WITH SOFT CLOSE-- Per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch. Recommended door thickness: 20mm (25/32"). The Lid stay hinge is made of nickel plated steel and plastic.
  • KEEP LID STAY OPEN -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for DOWNWARDS opening doors, such as vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
  • COMPACT DESIGN OF LID HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
  • EASY TO INSTALL LID SUPPORT-- Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
SaleRank No. #15
Douper Lid Support Hinge in Satin Nickel Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Cupboard Wardrobe Max Weight Support 40lb/2pcs (2 Pack)
  • RANDOM STAY—Adjust the lid opening angle, and keep it stay in place at different angles without time limit. It will not slam shut when the lid stays open
  • CONDITIONED SOFT CLOSING—Only with this hinge supporting less than 40lbs and keeping two hinges in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and protect your fingers from being crunched
  • ADJUSTABLE TENSION--Adjust tension with Allen wrench to fit for lids with different weight. After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut
  • EASY TO INSTALL—Our lid stay allows you to keep it installed for 75°, 90°, and 110° opening. The hinge is used for side-mounting and top-mounting. Mark two points for drilling holes, and screw each mounting bracket into its respective place. Come with installing screws and Allen wrench
  • SUPPORT MAX 40LB/2PCS—Made of durable and sturdy Zinc alloy in Satin Nickel, it is designed for supporting the lid weighing less than 40lb, such as ones of toy chamber, cabinet, cupboard and window seat, and wardrobe.
Rank No. #16
HuiDao 1 Pair Hydraulic Gas Strut Lift Support Door Cabinet Hinge Spring Soft Close Hinge Lid Support Buffer Telescopic Rod for Furniture Cabinet Cupboard Door, 100N/22.5lb (Downturn Door 2)
  • ☺Durable to Use - Sturdy metal and ABS material with satin silver finish, strengthening its anti-corrosion performance and supporting capacity.
  • ☺Hydraulic Gas Strut - Adopts hydraulic system for easy operation, full-stage damper and good sealing without oil leakage.
  • ☺Down-Turned Style - The default state of the support bar is closed, and it is easy to pull it out manually, just a little effort. The installation effect of the down support bar is to let the door open slowly. Ideal for supporting the lid to keep it close.
  • ☺Size - Length(Approx.): 27cm/10.6inch. Force:100N / 22.5lb (Per Strut). More than 30cm cupboard door height requirement.
  • ☺Widely Use - Suitable for cupboards, bookcases, wardrobes, windowsill, Tatami or platform and other furnitures, bottom support.
Rank No. #17
NAIERDI [2 Pack] Gas Spring, 150N/33lb, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges
  • HEAVY DUTY GAS STRUT: 150N/33lb (Per Strut), Total Length: 10.63 inch, Travel Length: 3.63 inch
  • SOFT CLOSE HINGES: This lid hinge can stop your toy box lid or cabinet door from slamming down, protect your fingers from being pinched.
  • NO-RUSTY: Copper core piston and zinc-plating material keep gas strut away from rusting.
  • APPLICATIONS: This gas spring lift is suitable for window bench seat with storage box, toy box, windows, rv cabinets or kitchen cabinets and so on.
  • 1 YEAR QUALITY WARRANTY: NAIERDI offers 1 year 100% satisfactory warranty. If there's a product quality issue or installation problems, please feel free to contact us. We will refund or replace your order to provide a best solution!
Rank No. #18
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
  • DURABLE LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function.
  • SOFT CLOSE STAY---Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting
  • MAX WEIGHT OF LID STAY--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
  • WIDE USAGE--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
  • EASY TO INSTALL LID HINGE --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.
Rank No. #19
Gas Spring, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Pressure (150N)
  • ★ Gas Strut Lift Support: Support opens lids to a maximum angle of 100 degrees. Lids soft open gently,Ideal for supporting the lid to keep it open.
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.
  • ★ Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use.
  • ★ Pressure:150N/33lb/15KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8".
  • ★ It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.
Rank No. #20
Gizhome 100N /22lb Safety Lift Support, Soft Open Lid Hinge Lid Stay Gas Struts Gas Shocks for Cabinet Toy Box, Pack of 2
  • Pressure: 100 N/22 lb (each hinge); 2pcs total 44lbs, Travel: 3-14/25”, Distance Between Ball Mounts Compressed: 8-7/10''
  • Ideal Choose: Perfect Lid support for supporting the lid to keep it soft open
  • Use: Designed for support on drop lids of desks,Toy Box, keeping the lid up, easy to use
  • Package: Included 2 x Gas Struts, 2 set of accessory, and 10 x Screws
  • Application: Perfect Gas Shocks for various box/toy chest/toy box/tool box/car to prevent from smashing hands

Last update on 2020-10-05 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Stay Open Spring Door Hinge for our consumer to review. The reports above show ratings of the best overal, best cheap Stay Open Spring Door Hinge to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.