The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Stay Open Spring Door Hinge of 2020 – Consumer Guide & Reviews

Rank No. #1
2 Pieces, Berta 10 Inch 100N/22LB Hydraulic Soft Open Gas Springs/Struts for Cabinets, Furniture Cabinet Doors Lift/Lid Stay/Support Hinges for RV Platforms with Brackets and Screws
  • PACKAGE CONTENT: 2 Pieces Gas Spring with Brackets and Installation Screws.
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree.
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray.
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc.
Rank No. #2
Berta (2 Pieces) 100N/22LB Hydraulic Soft Open Gas Springs, Gas Strut for Cabinets, Cabinet Doors Lift Support, Gas Shocks, Lid Stay, Lid Support with Brackets and Installation Screws
  • PACKAGE CONTENT: 2 Pieces Gas Spring with Brackets and Installation Screws.
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree.
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray.
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc.
Rank No. #3
Xntun 4 Pcs 100N /22.5lb Kitchen Cupboard Door Pneumatic Spring Strut, Close Lid Hinge, Down Lid Stay, Safety Lift Support, Toy Box Gas Strut
  • Pressure:100N/22.5lb (each struts);Compressed Length:7.1 inch; Extended Lenghth:10.5 inch.
  • Perfect lid support for supporting the lid to keep it open, support opens lids to a maximum angle of 100 degrees.
  • Made of circular metal mounting plate, high quality piston and brass conductor, designed for three screw holes, the installation is more firmer.
  • This pneumatic support is could be used for many purposes, suitable for cabinet, cupboard,furniture door, toy box etc.
  • Package Included:4 x Gas Struts and 24 x Screws.
Rank No. #4
Douper 100N/22lb Gas Spring Hinge Slow Down Drop Leaf of Cabinets Desks Slowly Open Drop Leaf Pack of 2
  • SPECIALLY DESIGNED FOR DROP LEAF--The hinge will work perfectly if your drop leaf weighs less than 22lbs. It is not used for supporting lid or keeping it stay.
  • STURDY GAS SPRING—Pressure: 100N/22lb. Suitable for: 16-22lb drop leaf. Made of solid brass and iron, sturdy gas spring helps to lower the lid softly and close it easily. With Chrome plated, it is durable and corrosion-resistant.
  • SOFT DROP-DOWN—It is designed to damper the drop-down rate of a drop leaf, such as that of cupboard, cabinet and shoebox, and prevent quick and dangerous closure.
  • EXTEND AUTOMATICALLY-- Overall length: 7.9in (compressed) to 11.4in (stretched). Travel-3.5in. The space-saving hinge will extend automatically as you pull the lid open, and will not get in the way.
  • EASY TO INSTALL by following the instructions
Rank No. #5
S SYDIEN 2Pcs 40N/8lb Gas Struts/Spring Lid Stay Cabinet Door Lift Pneumatic Support
  • Force:40N/8lb (Per Strut);Support opens lids to a maximum angle of 100 degrees.
  • Length ( hole center to hole center):245mm/9.6''; Compressed Length:185mm/7.3"; Extended Lenghth:275mm/10.8".
  • Perfect for various box/toy chest/toy box to prevent from smashing hands.
  • Use: Designed for support on drop lids of desks, cabinets, keeping the lid up, easy to use.
  • Package Content:2Pcs Gas Spring Support Rod &4Pcs Fixing Plate & Some Screws; Style: Square Ball Socket.
Rank No. #6
LC LICTOP 6 Pcs Soft Close Lid Support 80N Hydraulic Gas Spring Cabinet Door Safety Lift Support (Black)
  • Lid stay force: 80N (per strut); length: (hole center to hole center): 10.5 inches; pressure: 18 pounds (one pillar)
  • Support to open the cover, the maximum angle is 100 degrees, the contact area with the cabinet is large, three points positioning, the installation is more secure.
  • Cylinder block and connecting rod: The high-strength material piston cylinder body is integrated with the bottom plate connecting rod, the load is larger, and the switch is flexible.
  • Gently cover the lid, ideal for soft closing the lid to prevent slamming, so it won't hurt your child's fingers
  • Suitable for cabinets, bookcases, wardrobes, window sills or platforms, etc., upper support.Package Included:6 X soft close lid support 80 N(black))
Rank No. #7
RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install
  • STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
  • LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
  • EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Rank No. #8
Lid Support Hinge, Tiberham Folding Lid Stay Hinge, Lid Lift Up Stay Buffer Damper for Kitchen Cabinet Door Cupboard Toy Box (Pack of 2)
  • DURABLE FOR EXTENDED USE: Made of premium quality zinc alloy with maximum corrosion resistance and durability, the lid stay hinges are made to provide constant support for years to come
  • ADJUSTABLE INTENSITY: With the included Allen wrench, the buffer hinges are fully adjustable for different weight by turning the screw in the middle of the arm to set up appropriate friction pressure so that the lid won’t come crash down while closing
  • HIGH LOAD CAPACITY: Each lid stay can be used for right or left hand mounting. The durable materials together with the strong mechanism enable the buffer hinge to hold door weight up to 22 lbs when 2 pcs are used
  • WIDE APPLICATIONS: Double-arm folding support hinges can hold the door in any open position or lets it slide down gently without smashing your fingers, perfect for a variety of lids or flaps.
  • BUY WITH CONFIDENCE: The buffer hinges come with screws and rivets for easy installation. Detail technical specifications are available in the instruction. Just buy with confidence as we are always here for you to provide 100% satisfactory service
Rank No. #9
LC LICTOP 6 Pcs Soft Close Lid Support 100N/22.5lb Gas Springs Strut Cabinet Door Lid Stay Support(Black
  • Lid stay force: 100N / 22.5lb (per strut); Length: (hole center to hole center): 10.5 inches
  • Gently cover the lid, ideal for soft closing the lid to prevent slamming, so it won't hurt your child's fingers.
  • Support to open the cover, the maximum angle is 100 degrees, the contact area with the cabinet is large, three points positioning, the installation is more secure.
  • Cylinder block and connecting rod: The high-strength material piston cylinder body is integrated with the bottom plate connecting rod, the load is larger, and the switch is flexible.
  • Suitable for cabinets, bookcases, wardrobes, window sills or platforms, etc., upper support,Package Included:6 X soft close lid support (black))
Rank No. #10
Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]
  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width <600mm/23.6in, and two for cabinet door width >600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door, 10N=2.2ib=1KG.Brand: WANLIAN
  • ★The pressure of the 150N gas strut is: 33lb/15KG, which is suitable for cabinet doors with a weight of 30-33lb/12-15KG. If a large model is selected, a lot of force is required to close the door when closing, please choose carefully. ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is a problem with the product or installation difficulties, please contact customer service as soon, thank you.
  • ★ Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use.*It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.
  • ★ Pressure:150N/33lb /15KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". 150N Gas Shocks suit best for the door weight 130N-150N,The door panel weighs more than 33lb, 15KG, it is not suitable for use. It will not be able to be supported, so use two or higher pressure models.
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.
Rank No. #11
Powell Jewelry Armoire Wood, Silver Mirrored
  • Provides ample storage space for all your treasures
  • Modern design
  • Top opens to reveal a mirror.Do not over tighten screws and bolts
  • Silver and Mirror Finish
  • Some assembly required.Material Content: Mdf, Rubber wood, Mirror, Rayon Lining
SaleRank No. #12
The Door Balancer Eliminates The Need for Door Props, Door Stops and Door Wedges
  • Eliminates the door wedge
  • Do you have to prop your interior doors open
  • Eliminates the door stop
  • Inexpensive cure for propping door open
SaleRank No. #13
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2
  • GENTLY CLOSE DESIGN -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers
  • HOLDS LID OPEN -- These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open
  • STRONG ENOUGH -- Douper 200N heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges (60lbs/ 2pcs)
  • 75°-105° OPEN ANGLE -- Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board.
  • WARM TIPS -- Douper hinges will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance. Hinges will not work if your lid doesn’t match specified dimension and weight requirement
Rank No. #14
Bench Seat Hinge for Toy Chest- Lid Support Stay Hinge- Heavy Duty No Slam Safety Torsion Hinge.
  • 2 for 1 PRICE! HINGE AND LID SUPPORT. No metal visible outside toy chest. See installation omages.
  • HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks
  • HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly
  • EASY INSTALLATION: If you are looking for a soft close, no slam lid support then Pinnacle Woodcraft's metal bench seat hinge is highly recommended and it is very easy to install with 4 screws on the storage box, toy box.
  • BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming or sudden motion injuries. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening
Rank No. #15
VOCOMO Soft Close Lid Support, 200N Gas Struts Heavy Duty Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs (2 Pack)
  • Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
  • 200N heavy duty gas struts - A 200N heavy-duty gas struts may be supported maximum 30lbs lid and gently lowered; 2 heavy gas struts may support maximum 60 pounds of the lid.
  • Lid stay 105 degree open with soft close - The lid stay allows the lid to open at a maximum 105 degree angle.
  • Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
  • No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service.
Rank No. #16
2 Pcs 18lb /80N Hydraulic Gas Strut Lift Support Cabinet Hinge Kitchen Cupboard Door Gas Spring Door Shocks Cabinets Hinges¡­
  • Pressure:18lb (one Strut),Load Bearing:80N; Compressed Length:7"; Extended Lenghth:10".
  • FIittings: one S trut with 5 screws to fix bracket and Manual included
  • Made of circular metal mounting plate, Satin silver finish, designed for three screw holes, the installation is more firmer.
  • The lift up gas support is suitable for cabinet, cupboard,furniture door and so on
  • Support opens lids to a maximum angle of 90 degrees
Rank No. #17
2 Packs [Upgraded] Qrity Cabinet Cupborad Furniture Door Lift Stay Support Hinge Damper - Support Up to 20KG - Opening Angle 75°/90°/110° - Come with Hex Key
  • Each Lid Stay can be used for Right or Left Hand Mounting.
  • Suitable for lids or flaps when a soft closing motion is required.
  • Three options of opening door angle - 75, 90 and 110 degree.
  • Can hold door weights of up to 40kg - Pair of Lid Stays (up to 20kg - 1 Lid Stay).
  • Fully adjustable for different weights by turning a screw at the middle of the arm to setup correct friction pressure(Hex Key included).
SaleRank No. #18
VOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box, Easy Install
  • LID SUPPORT HINGE - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
  • SOFT CLOSE - Lids will lower slowly and gently to avoid slams shut and crush the little fingers of children.
  • 105 DEGREE OPEN - The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge can be used for right or left side mounting.
  • SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas.
  • EASY TO INSTALL - Easy to follow graphic installation instructions ensure a perfect install the first time.
Rank No. #19
Gas Spring, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Pressure:120N/26lb/12KG[ 2 Pack ]
  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width <600mm/23.6in, and two for cabinet door width >600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door, 10N=2.2ib=1KG.
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is a problem with the product or installation difficulties, please contact customer service as soon as possible to send installation pictures or videos, thank you.Brand: WANLIAN
  • ★ Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use.*It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.Brand: WANLIAN
  • ★ Pressure:120N/26lb/12KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". 120N Gas Shocks suit best for the door weight 100N-120N,The door panel weighs more than 26lb, 12KG, it is not suitable for use. It will not be able to be supported, so use two or higher pressure models.Brand: WANLIAN
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.
Rank No. #20
Magnetic Push Latch Heavy Duty Jiayi 2 Pack Double Push to Open Door Latch Cabinet Hardware Spring Touch Latches for Kitchen Drawer Door Closures Push Pull Cabinet Latches Push Release Latch
  • Double Push To Open: Double catch design, this jiayi 2 pack magnetic push latch are equivalent to 4 pack push cabinet latch. Eliminates the need for handles or knobs. Create the clean, seamless look of no knobs. Suitable for using with hinges without self-closing feature.
  • Long Stroke with Magnetic: Long stroke with built- in magnet, magnetic force ensure a secure close point that make the door more tightly united and no more 'drifting open' doors. Make this push latch more suitable for medium or full size doors.
  • Powerful Piston/Spring: Larger and thicker heavy-duty spring mechanism has a strong enough tension make this push opener an exceptionally durable and timeless choice. Ensure lifetime up to 20000 times.
  • Adhesive Installation: Aluminum alloy housing, more durable and long-lasting. You can install the push cabinet latch without drilling screw holes by using the included adhesive (Comes in red and white colors and will be shipped randomly). Also come with mounting screws. Mounting the two elliptical holes firstly, in order to adjust place to suit closing. So you don't worry about whether it could be difficult to locate the mount exactly.
  • What You Get:2 x Double push open cabinet latches; 12 x Base Mounting Screws; 4 x Flat head screws; 4 x Anchors; 4 x Ultra thin Adhesive strike(For external door, 1/8 inch compression stroke must be reserved during installation.)

Last update on 2022-01-11 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Stay Open Spring Door Hinge for our consumer to review. The reports above show ratings of the best overal, best cheap Stay Open Spring Door Hinge to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.