The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Springfield Emp Grips of 2020 – Consumer Guide & Reviews

Rank No. #1
StonerCNC 1911 EMP 4 Grip Fit Springfield Armory 9MM & .40SW 4" Lightweight Champion Concealed Carry Contour Aggressive Star G10 Standard Bevel, Bobtail OR Magwell Cut (Grey Black, EMP Bobtail)
  • Tailored to fit Springfield Armory EMP 4" 1911 9mm or .40SW
  • Does NOT fit Compact EMP these grips fit the EMP 4 ONLY
  • G10 Material - Aggressive Starburst Textured Design - American Made
  • Ambi Notch Standard - Thumb Notch Standard - CNC Machined - Fully De-horned
  • EMP 4 Grips come standard as Slim line thickness (approximately .187") to match factory hardware.
Rank No. #2
Pearce Grips PG-OM1 Rubber Finger Groove Insert for Compact 1911
  • Package length: 3.048 cm
  • Package width: 7.62 cm
  • Package height: 14.478 cm
  • Product Type: SPORTING GOODS
Rank No. #3
Hogue 43000 1911 Officers Model Rubber Grip w/ Finger Grooves
  • Package length: 3.81 cm
  • Package width: 9.398 cm
  • Package height: 15.494 cm
  • Product Type: SPORTING GOODS
Rank No. #4
StonerCNC 1911 Slim Line Full Size Compact 1911 EMP Gun Grip Tactical Eclipse G10 with Ambi Magwell Bobtail Roundbutt Bottom Cut Options (Neon Green Black, 1911 Full Size)
  • Choose a frame 1911 Full Size or 1911 Compact/Springfield EMP 3
  • Choose a Bottom Cut - Standard, Magwell, Bobtail (1911 Full Size Only) Round Butt (Full Size Only)
  • Slim Line Grips - .187" Thick
  • Ambi Notch Standard - CNC Machined - Fully De-horned
  • G10 Material - Tactical Eclipse Textured Design - American Made
SaleRank No. #5
Crimson Trace Maser Series Red Laser Sight for Springfield Armory Emp LG-912 Maser Series Red Laser Sight for Springfield Armory Emp
  • Fits Springfield Armory EMP
  • Attachment: Grip Replacement
  • Activation Location: Front Activation
  • Activation Mode: Pressure Activated
  • Class IIIR Laser Product: <5mW power output
Rank No. #6
StonerCNC 1911 Slim Line Full Size Compact 1911 EMP Gun Grip Aggressive Starburst G10 with Ambi Magwell Bobtail Roundbutt Bottom Cut Options (Grey Black, 1911 Compact & EMP)
  • Choose a frame 1911 Full Size or 1911 Compact/Springfield EMP 3
  • Choose a Bottom Cut - Standard, Magwell, Bobtail (1911 Full Size Only) Round Butt (Full Size Only)
  • Slim Line Grips - .187" Thick - Requires slim line bushings AND screws
  • Ambi Notch Standard - Thumb Notch Standard - CNC Machined - Fully De-horned
  • G10 Material - Aggressive Starburst Textured Design - American Made
Rank No. #7
VZ Grips Operator II 1911 Gun Grips (Blue Black, Full Size)
  • TEXTURE: Very Aggressive
  • USE: Tactical, IPSC, IDPA, etc...
  • MATERIALS: G10
SaleRank No. #8
Cool Hand 1911 G10 Grips, Compact/Officer, Sunburst Texture, Brand, Grey/Black, H2-J6-5
  • 1. CNC machined from strong durable non slippery G10.
  • 2. These grips fit 1911 Compact/Officer.
  • 3. Measurement between two center holes: 2 11/16", thickness: 1/4".
  • 4. Sunburst texture, aggressive.
Rank No. #9
StonerCNC 1911 EMP 4 Gun Grip Fits Springfield Armory 9MM and .40SW 4" Pistol Super Aggressive G10 with Standard Bevel OR Magwell Bottom Cut (Midnight Black, EMP Standard Bevel)
  • Tailored to fit Springfield Armory EMP 4" 1911 9mm or .40SW
  • Does NOT fit Compact EMP these grips fit the EMP 4 ONLY
  • G10 Material - Super Aggressive Textured Design - American Made
  • Ambi Notch Standard - Thumb Notch Standard - CNC Machined - Fully De-horned
  • EMP 4 Grips come standard as Slim line thickness (approximately .187") to match factory hardware.
Rank No. #10
Valkyrie Dynamics 1911 Compact Officer Grips Colt Kimber Defender Hive Black Finish Colt Aluminium para Springfield
  • Grips for Compact and Officer size 1911's. WILL NOT FIT FULL SIZE 1911's.
  • billet aluminium
  • Anodized black
  • ergo thumb knotch
  • The distance between the screw holes is approximately 2 5/8 inches.
Rank No. #11
StonerCNC 1911 EMP 4 Grip Fit Springfield Armory 9MM & .40SW 4" Lightweight Champion Concealed Carry Contour Cross Hatch G10 Standard Bevel, Bobtail OR Magwell Cut (Mil Spec Camo, EMP Bobtail)
  • Tailored to fit Springfield Armory EMP 4" 1911 9mm or .40SW
  • Does NOT fit Compact EMP these grips fit the EMP 4 ONLY
  • G10 Material - Cross Hatch Textured Design - American Made
  • Ambi Notch Standard - Thumb Notch Standard - CNC Machined - Fully De-horned
  • EMP 4 Grips come standard as Slim line thickness (approximately .187") to match factory hardware.
Rank No. #12
Hogue Wraparound Rubber Grips with Finger Grooves 1911 Colt .45 9mm #C45-000
  • Introducing our new Hogue Wraparound Rubber Grips accompanied with finger grooves making it more efficient
  • Durable and long lasting 1911 grips are versatile in nature fits and compatible with .45, 9mm, .22, .38, 10mm Delta, Spfld Armory
  • One of the main feature of this 1911 custom grips is that it offers superior performance and world-class design.
  • Quality is assured and maintained up-to a certain level meeting all the current market standards.
  • first choice of law enforcement, handgun manufacturers, competitive shooters and firearm enthusiasts worldwide
Rank No. #13
Cool Hand 1911 Compact Slim G10 Grips, Free Screws Included, Big Scoop Magazine Release Cut, 3/16" Thin, Operator Texture
  • Texture: Aggressive Operator textured design. Material: CNC Machined from G10 Phenolic material, white/black double tone with red baseplate
  • Big Scoop magazine release is new trend and has been very welcomed by shooters
  • Free screws: 4 screws, 4 O rings, T10 Torx key included
  • These grips will fit 1911 Compact (Officer) BUT with short bushing. If bushings on your pistol were standard, the grips will stick out ! To make sure our grips will fit your gun please measure the distance between the center of both holes must be 2 11/16" inches
  • Warranty: 30 Days Money Back - No Questions Asked!
Rank No. #14
Outtag Bike Handbar Grips for Cycling MTB Mountain Road Folding Bike, 3D Surface Non Slip Soft Rubber Ergonomic Design Handle Bar
  • Material: High quality rubber,comfortable and no-slip
  • Comfortable 3d surface bicycle grips for fixed-gear, single-speed, track bike, road bicycle and all kinds of bikes
  • Easy to install, keep grips tight,no worry loose or fall down
  • Dimension:approx.4.7‘’ x 1.2''. Inner Diameter size is approx.0.87''
  • Package: 1 Pack/2pcs Outtag 3D Surface Handlebar Grips
Rank No. #15
Premium Gun Grips 1911 Pearl Colt Gov. & Clones Taurus, S&W, Springfield, Rock Island Mother of Pearl Full Size
  • Elegant Polymer / Acrylic Bright White Pearl grips
  • Presentation Grade/Highly polished
  • Finished in NC. 100% US owned business
  • "Affordable grips for the working man"
Rank No. #16
ArachniGRIP Compatible w/Springfield Armory EMP Black Grips No Imprint
  • OVERCOME ADVERSE CONDITIONS: Improve the integrity of your grip in adverse conditions.
  • IMPROVE WEAPON SAFETY: Lessen the possibility of mistakes with a sure and firm grip of the slide.
  • HAVE THE GRIP YOU NEED: Use this device to secure your weapons slide when it matters most. Be prepared using a product that functions in the worst conditions in the worst situation.
  • EACH PACKAGE CONTAINS TWO(2) GRANULE/GRIT STYLE GRIPS
  • PROUDLY MADE IN THE USA
Rank No. #17
ArachniGRIP Compatible w/Springfield Armory EMP Black Grips w/Red Spider Logo
  • OVERCOME ADVERSE CONDITIONS: Improve the integrity of your grip in adverse conditions.
  • IMPROVE WEAPON SAFETY: Lessen the possibility of mistakes with a sure and firm grip of the slide.
  • HAVE THE GRIP YOU NEED: Use this device to secure your weapons slide when it matters most. Be prepared using a product that functions in the worst conditions in the worst situation.
  • EACH PACKAGE CONTAINS TWO(2) GRANULE/GRIT STYLE GRIPS
  • PROUDLY MADE IN THE USA
Rank No. #18
Recover Tactical CC3H 1911 Grip and Rail System No Modifications Required, Goes on in Under 3 Minutes
  • Simplest way to add a rail to your 1911
  • Easy installation - no gunsmith or permanent modifications required
  • Made from high-grade reinforced Polymer - will not break or damage your gun
  • Universal fit for most Standard sized 1911 RCV-W-CC3-TAN pistols - only work with full sized 1911 pistols
  • Recover HC11 holster compatible
Rank No. #19
EXEL 1911 Slim Grips,Compact/Officer,Big Scoop, 3/16" Thin,Sunburst Texture,Grey/Black G10, Cool Hand
  • 1. CNC machined from strong durable non slippery G10.
  • 2. These grips fit 1911 Compact (Officer) with slim bushing.
  • 3. Meas. between two center holes: 2 11/16", thickness: 3/16".
  • 4. Sunburst texture, aggressive. Without ambi safety cut.
  • 5. If the current grips on your 1911 are with a standard thickness, about 1/4". Then make sure you are aware that you would need a set of short bushing and a set of short screws!
SaleRank No. #20
Crimson Trace Lasergrip for 1911 Officer'S/Defender/Compact, Black with Front Activation
  • GUARANTEED: This product is covered by a 3-Year Limited Warranty. For questions or warranty contact us at support@crimsontrace.com
  • INSTINCTIVE ACTIVATION: Front activation button engages the laser immediately when the firearm is held in a normal firing grip. This is the feature that sets Crimson Trace apart from the rest.
  • OVER FOUR HOURS OF BATTERY LIFE: Powered by two #2032 Batteries (included). This product is eligible for Crimson Trace’s Free Batteries For Life Program.
  • FITS 1911 Compact
  • EASY INSTALLATION: User installed- no gunsmithing required. Factory sighted at 50 feet, but is fully user adjustable for Windage and Elevation with provided tool. This model features a master ON/OFF switch for completely powering down the unit.

Last update on 2020-10-21 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Springfield Emp Grips for our consumer to review. The reports above show ratings of the best overal, best cheap Springfield Emp Grips to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.