The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Softail Deluxe 14 Ape Hangers of 2020 – Consumer Guide & Reviews

Rank No. #1
Hill Country Customs 1 1/4" Chrome 14" Ape Hanger Handlebar Kit 1996-2006 Harley-Davidson Softail - BC-HC-11414C-ST06
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Color Coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars and include factory pins installed. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 1996-2006 Harley-Davidson Softail Models with Single Front Disc Brakes, except for Springers. Handlebar Specs are: Height 14"  Total Width 36"  Center Width 10.5"  Pullback 7.5"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model # , Handlebar Riser Height? (1"-6" tall) does it have a Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kits are also available: 1996-1999 model part #: HC-HIK-11B, 2000-2005 model part #: HC-HIK-12B, 2006 model part #: HC-HIK-13B.
Rank No. #2
Krator 1.25" Black Handlebar with 14" Rise - Fat 1 1/4" Ape Hanger Bar Compatible with Harley Softail Deluxe FLSTN 2005-2017
  • High Quality 1.25" Black Handlebar with 14" Rise for Harley-Davidson Motorcycles
  • Center Section Tapers to 1" So That Standard Handlebar Controls Fit
  • 8" Backward Sweep, 3.5" On-Center Knurling For Firm Mounting
  • Easy Installation, Comes with Drilled Wiring Holes
  • Fitment: Harley Davidson Low Rider FXLR 2018-2020
Rank No. #3
WSays Gloss Black Ape Hangers Handlebar 14" Rise 1-1/4" Diameter Handle Bar Compatible with Harley Sportster XL 883 1200 & Dyna Softail Touring Road Glide Road King
  • Fitments:Harley Dyna Softail Sportster XL 883 1200 & Road King Model & 1998-2013 Road Glide.(Do not Harley Electra Glide,Street Glide & 2014-UP Road Glide,2008-2011 Harley Cross Bones FLSTSB with OEM risers.)
  • Gloss Black Material: Copper+Nickle+Power Coated Black,High Standard Rust-Proof plating; Seamless Steel Pipe,much stronger than other Straight Seam Welded pipe.
  • Handle Bar Specifications: The handlebar end rise 14'', Bar Diamete:1-1/4 inch,Pullback/Sweep: 8 inch;Clamp Area Width: 5.4 inch & Diameter: 1 inch;Center Width: 10-1/2 inch, Grip Area Bar Diameter: 1 inch.Overall Width: 35.5 inch. Knurling Inside Width:2.5" ; Outside Width:4.5".
  • Easy Install: The Monkey Bagger Bar model with wiring holes, with Pre-Drilled, easy installation, it gives a wonderful driving experience.
  • Package include: 1x 14'' gloss black Ape Hangers Handlebar.
Rank No. #4
Pioneer DMH-1500NEX Digital Media Receiver with 7" WVGA Display, Apple CarPlay, Android Auto, Built in Bluetooth
  • Apple CarPlay Compatible
  • Android Auto Compatible
  • WebLink Compatible
  • Navigation Ready
  • Works with Pandora, SiriusXM Ready
Rank No. #5
1 1/4" BBlack Wild 1 WO614 14" Ape Hanger Kit for 2016 and newer Harley-Davidson Softail models with ABS Brakes - BC-0601-3158-ST16-ABS-BC
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Black Vinyl Coated Cables and Stainless Brake Lines have chrome ends which make them look good. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2016-2017 Harley-Davidson Softail Models with Single Front Disc Brakes and with ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #6
APE HANGER HANDLEBARS FAT 1-1/2" MONSTER BARS FOR HARLEY MODELS (Chrome, 12")
  • Notched ends for throttle-by-wire applications
  • 1-1/2" Thick in diameter for more beefy chubby aggressive custom look
  • Triple chrome plated or gloss black powder coated
  • 35" Wide, 6" Pull back, and 1" Center tube with 3-1/2" Center spacing for the riser
  • Outside Bottom Width: 13-1/4" wide, Inside Bottom Width: 11" wide
Rank No. #7
Hill Country Customs 1 1/4" Black Wild 1 WO614 14" Ape Hanger Kit for 2011 & Newer Harley-Davidson Softail models with ABS brakes - BSC-0601-3158-ST11-ABS
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2011-2015 Harley-Davidson Softail Models with Single Front Disc Brakes and with ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #8
Hill Country Customs 1 1/4" BBlack Wild 1 WO614 14" Ape Hanger Kit for 2011 & Newer Harley-Davidson Softail models without ABS brakes - BC-0601-3158-ST11-BC
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Black Vinyl Coated Cables and Stainless Brake Lines have chrome ends which make them look good. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2011-2015 Harley-Davidson Softail Models with Single Front Disc Brakes and without ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #9
Hill Country Customs 1 1/4" BBlack Wild 1 WO614 14" Ape Hanger Kit for 2011 & Newer Harley-Davidson Softail models with ABS brakes - BC-0601-3158-ST11-ABS-BC
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Black Vinyl Coated Cables and Stainless Brake Lines have chrome ends which make them look good. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2011-2015 Harley-Davidson Softail Models with Single Front Disc Brakes and with ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #10
Hill Country Customs 1 1/4" Chrome Wild 1 WO614 14" Ape Hanger Kit for 2011 & Newer Harley-Davidson Softail models with ABS brakes - BSC-0601-3157-ST11-ABS
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2011-2015 Harley-Davidson Softail Models with Single Front Disc Brakes and with ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #11
Hill Country Customs 1 1/4" Chrome Wild 1 WO614 14" Ape Hanger Kit for 2011 & Newer Harley-Davidson Softail models without ABS brakes - BSC-0601-3157-ST11
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2011-2015 Harley-Davidson Softail Models with Single Front Disc Brakes and without ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #12
Dominator Industries 1 1/4 inch Meathook Monkey Bagger Ape Handlebar, 14 inch Rise, Gloss Black for 1996-2020 Electra Glide (FLH), Electra Glide Classic (FLHTC), and Street Glide (FLHX)
  • CONTROL COMPATIBILITY: This 1 1/4 inch Meathook Monkey Bagger Ape is Compatible with all the stock cables & controls on 1996-2020 Street Glide.
  • MODEL COMPATIBILITY: Fits 1996-2020 model years of the Harley-Davidson Electra Glide (FLH), Electra Glide Classic (FLHTC), and the Street Glide (FLHX) - Excluding Screaming Eagle models. Available with 10 inch, 12 inch, 13 inch, 14 inch, and 16 inch rise in Chrome or Gloss Black Finish.
  • READY TO GO: Our Handlebars are Properly Plumbed for Internal Wiring and Notched for TBW Applications. What Does This Mean? Less Time Installing Your Handlebars and More Time RIDING!
  • QUALITY: Hand Made in the USA - Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy.
  • DOMINATOR: A NAME YOU CAN TRUST: Dominator Cycles is a Name You can Trust. We Produce High quality Handlebars Right Here in the States. Furthermore, Our Five Star Customer Service, Customized Products, and Limited Lifetime Warranty Will Make Dominator a Partner You and Your Bike can Partner with for Years to COME.
Rank No. #13
WeiSen Gloss Black 14" Ape Hangers Monkey Handlebar 1-1/4" Handle Bars Compatible with Harley Dyna Softail Sportster XL 883 1200 & Touring Road Glide/Road King
  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & Road King Model & 1998-2013 Road Glide. (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers)
  • Finish: Power Coat Gloss Black (Copper+Nickle+Power Coated Black). Condition: Aftermarket 100% brand new and high quality. Material: Seamless steel pipe (Much Stronger than other's Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance.
  • Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 10-1/2 inch, Clamp Area Width: 5.4 inch & Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 14 inch. Model: Monkey Bagger Bar. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch. Knurling Inside Width: 2.5". Outside Width: 4.5".
  • Pretty easy to install, no drilling required. Provide more comfortable driving experience and aggressive appearance.
  • Package include: 1x Ape Hangers Handlebar.
Rank No. #14
14'' Rise 1-1/4'' Batwing Ape Hanger HandleBar Fit Harley Sportster XL Softail FLST FXST Chrome
  • Material: High Quality Iron
  • Diameter: 1-1/4";Width: 35.5";Pull Back: 8";Center Width: 10-1/2"
  • Fitment:Harley Softail FLST, FXST,Sportster XL
  • Package Includes: 1 x Handlebar
  • Color:Chrome
Rank No. #15
HTTMT HB02-1-1/4 Inches Fat 12 Inches Rise Ape Hangers Handlebar Compatible with Harley Sportster XL 1200 883
  • High class quality and very durable.
  • Good Working Condition.
  • Fits Harley-Davidson FLST, FXST, Sportster XL, any Custom Application.
  • Aftermarket 100% Brand New! USA Stock!
Rank No. #16
1 1/4" BBlack Narrow 14" Ape Hanger Handlebar PKit for 2007-2010 Harley-Davidson Softail models - CMPT-11414GBBN-PST10
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Ape Hanger Handlebar Kit that you will find on Amazon. We provide you with a completely assembled Plug and Play handlebar set up that includes new controls, switches and wiring harnesses with factory plugs. Included are the correct extended length cables and Front Brake line that fit your Harley-Davidson model. You will reuse your current grips.
  • Black Vinyl Coated Cables and Stainless Brake Lines have chrome ends which look really good. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • This kit includes new Gloss Black Powder Coated Controls, Gloss Black Switch Housings, Black switches with new wiring harnesses and factory plugs installed. We do not include longer turn signal light wiring and recommend you mount the lights close to the original location or head light area.
  • Fits 2007-2010 Harley-Davidson Softail models with single Front Disc Brakes except Springer & Fatboy models. Handlebar Specs are: Height 14" Total Width 34" Center Width 10" Pullback 7.5"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model # , Handlebar Riser Height? (1"-6" tall) does it have a Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #17
1 1/4" Chrome Narrow 14" Ape Hanger Handlebar PKit for 2007-2010 Harley-Davidson Softail models - CMPT-11414N-PST10
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Ape Hanger Handlebar Kit that you will find on Amazon. We provide you with a completely assembled Plug and Play handlebar set up that includes new controls, switches and wiring harnesses with factory plugs. Included are the correct extended length cables and Front Brake line that fit your Harley-Davidson model. You will reuse your current grips.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • This kit includes new Chrome Controls, Chrome Switch Housings, Chrome switches with new wiring harnesses and factory plugs installed. We do not include longer turn signal light wiring and recommend you mount the lights close to the original location or head light area.
  • Fits 2007-2010 Harley-Davidson Softail models with single Front Disc Brakes except Springer & Fatboy models. Handlebar Specs are: Height 14" Total Width 34" Center Width 10" Pullback 7.5"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model # , Handlebar Riser Height? (1"-6" tall) does it have a Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #18
1 1/4" Chrome 14" Ape Hanger Handlebar PKit for 2007-2010 Harley-Davidson Softail models - CMPT-11414C-PST10
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Ape Hanger Handlebar Kit that you will find on Amazon. We provide you with a completely assembled Plug and Play handlebar set up that includes new controls, switches and wiring harnesses with factory plugs. Included are the correct extended length cables and Front Brake line that fit your Harley-Davidson model. You will reuse your current grips.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • This kit includes new Chrome Controls, Chrome Switch Housings, Chrome switches with new wiring harnesses and factory plugs installed. We do not include longer turn signal light wiring and recommend you mount the lights close to the original location or head light area.
  • Fits 2007-2010 Harley-Davidson Softail models with single Front Disc Brakes except Springer & Fatboy models. Handlebar Specs are: Height 14" Total Width 36" Center Width 10.5" Pullback 7.5"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model # , Handlebar Riser Height? (1"-6" tall) does it have a Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #19
1 1/4" Chrome Wild 1 WO614 14" Ape Hanger Kit for 2016 and newer Harley-Davidson Softail models with ABS Brakes - BSC-0601-3157-ST16-ABS
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2016-2017 Harley-Davidson Softail Models with Single Front Disc Brakes and with ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.
Rank No. #20
1 1/4" BBlack Wild 1 WO614 14" Ape Hanger Kit for 2016 and newer Harley-Davidson Softail models without ABS brakes - BC-0601-3158-ST16-BC
  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! - This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley-Davidson model.
  • Black Vinyl Coated Cables and Stainless Brake Lines have chrome ends which make them look good. PTFE protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Wire extensions with factory mini plugs attached are included to extend all stock handlebar controls harnesses for your new handlebars. Turn Signal Light Extensions are not included and we recommend mounting the turn signals close to the headlight for safety when riding at night. There are extensions available in our store which you can purchase if you want to mount the lights up high.
  • Fits 2016-2017 Harley-Davidson Softail Models with Single Front Disc Brakes and without ABS Brakes. Will not fit Fatboy, Breakout and Springer models. Handlebar Specs are: Height 14"  Total Width 35"  Center Width 8.5"  Pullback 8"
  • Please read the Additional Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #? Handlebar Riser Height? (1" to 6" tall) does it have ABS Brakes? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB101. Installation kit is also available: part #: HC-HIK-14B.

Last update on 2020-10-22 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Softail Deluxe 14 Ape Hangers for our consumer to review. The reports above show ratings of the best overal, best cheap Softail Deluxe 14 Ape Hangers to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.