The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Snugtop Tonneau Cover Replacement Parts of 2020 – Consumer Guide & Reviews

Rank No. #1
Maxpow Qty2 4568 SE1200M80PS100 8196319 Tonneau Cover Struts Lift Supports 29.49" Extended 13mm ends
  • Interchange Part Number: 4568, SE1200M80PS100, SE1200m80BBL3158, 8196319, 030475, 030359, 30359, 713120, 1200M80BL, 713120-1200, 7131201200, 2934, 716821, Snug Top 713120-1200, SnugTop 713120-1200, SE1200M80BL, RB8795984, 95984
  • Specifications: Extended Length: 29.49 Inches, Compressed Length: 17.52 Inches
  • Placement on Vehicle: 2 Pcs Universal Tonneau Cover Lift Supports Gas Struts
  • Function: Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head ensures easy installation and precise operation
  • Attention: Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports.
Rank No. #2
Qty (2) Tonneau Cover Lift Supports, Replaces # 713119
  • This listing includes 2 Lift Supports for Multi Purpose Applications.
  • Extended Length from Center Mount to Center Mount is 26.32 in.
  • Strong Arm supports use standards of high quality you can trust and use with confidence, they install easily in minutes, often times without special tools required.
  • Easy to install with simple hand tools in just minutes.
  • Compatible with the following OEM Numbers:RE-713119
Rank No. #3
2 Pieces (Set) Tuff Support Camper Shell Cap Topper Snugtop Tonneau Leer Cover Lift Supports 26 Inches 85 Lbs. Repl- C16-24797
  • Replacement for C16-24797
  • Extended Length: 26.34 in--Compressed Length: 15.71 in
  • In Original Tuff Support Packaging With Lifetime Limited Warranty*
  • Instructions Available When Needed for Easy and Safe Installation
Rank No. #5
2 Truck Upfitters 26.5" Gas Props Compatible with Snuglid SL & F2 Pickup Truck Shortbed Tonneau Covers (26.5" extended 15.4" comp, 80 lbs of press ea) MEASUREMENT REQ'D! Incl 4 ball mounts and nuts!
  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE ARE NOT COMPATIBLE WITH ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
  • Truck Upfitters Pair (2 total) of 80 pound (each) gas struts. 26.5" extended length and 15.4" compressed length. Most commonly used and compatible with for Snuglid/Snugtop brand (SL & F2 models) and compatible with Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit.
  • These are not compatible with all Snuglid fiberglass tonneau models (they do NOT fit ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 80 pounds of pressure, or 355N - 356N Newtons of pressure
  • Comes with four threaded 13mm ball mounts and nuts for alternate 'other than tonneau cover' applications. Compatible with Stabilus 202677 or compatible with Snuglid # 713119. Prime! Free Shipping! In Stock!
  • Compatible with some (but not all) Snuglid SL and F2 Shortbed and Extrashort bed (5.5-6.5') Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers: Compatible with Snugtop # 713119 or compatible with Stabilus # 202677.
Rank No. #7
UNDERCOVER RSAS1002CL Lock Kit
  • Designed to deliver trouble-free, consistent performance
  • Right for your vehicle and lifestyle
  • Made from high-quality materials for ultimate durability
  • Manufactured to meet or exceed strict quality requirements
  • If you have any questions or need fitment information for your vehicle, please contact with us
Rank No. #9
Qty (2) 4567 Tonneau lift Supports 26.32" Extended 13mm ends (if unsure send us numbers off old supports)
  • This listing includes 2 Lift Supports for Multi Purpose Applications.
  • Extended Length from Center Mount to Center Mount is 26.32 in.
  • Strong Arm supports use standards of high quality you can trust and use with confidence, they install easily in minutes, often times without special tools required.
  • Easy to install with simple hand tools in just minutes.
  • Compatible with the following OEM Numbers:202677,2985EV,299,4567,713119,713119-1024,713191024,73119-1024,AVMSE1024M80B1,C1624797,C16-24797,D45833,D-45833,GS6711,GSNI6711,GSNI-6711,SE1024M80B1,SE1024M80BL,SE1024M80BL0870,SE1024M-85,SE1050V-85,Snug Top 713119-1024,SPD6711,SPDGS6711,SPD-GS-6711,SPDGSNI6711
Rank No. #10
2 Truck Upfitters 29.5" Gas Props Compatible with Snuglid SL & F2 Pickup Truck Shortbed Tonneaus (29.5" ext, 17.95 compressed, 80 lbs of pressure ea) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!
  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE ARE NOT COMPATIBLE WITH ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
  • Truck Upfitters Pair (2 total) of 80 pound (each) gas struts. 29.5" extended length and 17.95 compressed length. Most commonly used and compatible with Snuglid/Snugtop brand (SL & F2 models) and compatible with Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit.
  • These are not compatible with all Snuglid fiberglass tonneau models (they do NOT fit ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 80 pounds of pressure, or 355N - 356N Newtons of pressure
  • Comes with four threaded 13mm ball mounts and nuts for alternate 'other than tonneau cover' applications. Compatible with Stabilus 030475 or compatible with Snuglid # 713120. Prime! Free Shipping! In Stock!
  • Compatible with some (but not all) Snuglid SL and F2 Shortbed and Extrashort bed (5.5-6.5') Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers: Compatible with Snugtop # 713120 or compatible with Stabilus # 030475.
Rank No. #11
2 Truck Upfitters 29.5" Gas Props Compatible with Snuglid SL & F2 Pickup Truck Longbed Tonneaus (29.5" ext, 17.95" compressed, 90 lbs of pressure ea) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!
  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE ARE NOT COMPATIBLE WITH ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
  • Truck Upfitters Pair (2 total) of 90 pound (each) gas struts. 29.5" extended length and 17.95 compressed length. Most commonly used and compatible with Snuglid/Snugtop brand (SL & F2 models) and compatible with Snuglid style Tonneau covers with 2 single lift assist arms. Fits other similar brand of fiberglass tonneau covers / truck lids, but measurement is required to ensure fit.
  • These are not compatible with all Snuglid fiberglass tonneau models (they ARE NOT COMPATIBLE WITH ANY SL2 or RL models). Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Also check for 90 pounds of pressure, or 400N - 401N Newtons of pressure
  • Comes with four threaded 13mm ball mounts and nuts for alternate 'other than tonneau cover' applications. Compatible with Stabilus 303359 or compatible with Snuglid # 716821. Prime! Free Shipping! In Stock!
  • Compatible with many (but not all) Snuglid SL and F2 extrashort and short bed (5.5', 6', 6.5') Truck Tonneau Covers with single lift arms (see picture). Check your original struts for part numbers: Compatible with Snugtop # 716821 or compatible with Stabilus # 303359.
Rank No. #14
2 Truck Upfitters 20" Gas Props for ARE Pickup Truck Bed Tonneau Covers (19.7" extended, 11.8" compressed, 110 pounds of pressure each) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!
  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL ARE TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
  • Truck Upfitters Pair (2 total) of 110 pound (each) gas struts. 19.7" extended length and 11.8" compressed length. Most commonly used for ARE brand and ARE style Tonneau covers with lift assist arms. Fits other similar brand of fiberglass tonneau covers /truck lids, but measurement is required to ensure fit.
  • These do not fit all fiberglass tonneau models. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.
  • Comes with four threaded 10mm ball mounts and nuts for alternate 'other than tonneau cover' applications. Equivalent to Suspa #C16-17796. Prime! Free Shipping! In Stock!
  • Fits most ARE Shortbed and Longbed (5.5-8.0') Truck Tonneau Covers with Lift Assist Arms.
Rank No. #15
Maxpow C16-08260 19.7inch 60 lbs Gas Prop/Strut Lift Support Camper Shell Cap Topper Snugtop Tonneau Leer Cover (Please Check the Extended Compressed Length and Force before you bought it)
  • Qty: 2pcs; Placement: Lift Supports (Please confirm the Extended Compressed Length are compatible with your vehicles)
  • Fits Universal; Interchange Part Number: C16-08260, 4450, 4450S10, C1608260
  • Extended Length: 19.69 inches, Compressed Length: 12.20 inch; Force 60 lbs(267N) Per Prop/Strut, Force 120 lbs Per Pair; Shaft Connection: Ball Socket U Band (Nylon)=10mm=3/8"=0.39", Body Connection: Ball Socket U Band (Nylon)=10mm=3/8"=0.39"
  • Exact fit and easy to install with simple hand tools in just minutes
  • Attention: Before purchasing please confirm that our product size and appearance are consistent with yours.
Rank No. #16
Snugtop parts.com 711632 Snugtop 13 mm triangle bracket
  • Snugtop 13 mm triangle bracket (each)
Rank No. #17
20 inch 150 Lbs (667 N) Gas Spring Shock Struts C16-17566 for Heavy-duty Floor Hatch Truck Tonneau Cover Camper RV Bed Large Outdoor Box Lid Trap Door (Suitable weight: 125-165 Pounds)
  • 20 Inch 150lbs/Shock Replacement Lift Supports Struts -- Extended size 19.7inch, compressed size 11.8inch; 150 Pounds per shock, 300 Pounds per set; 2 lift struts included in each set
  • 2 Pcs 150 Pounds Per Shock Lift Supports - Most suitable SUPPORT weight lid is 125-165 pounds; SUPER STRONG, ONLY FIT FOR HEAVY LID!
  • 2 Pcs 300 Pounds Per Set Gas Spring Shocks - Very strong, couldn't be installed on window or compressed by hands directly before installing! Installation instruction and ball studs are included, but NO BRACKETS, if you need, please search "B07SFH58QR" for matched ARANA ball stud mount brackets;
  • 2 Pcs 20" Gas Prop Replacement Struts -- ARANA 20" Gas Prop Shocks will help you support your heavy duty bench box lid, boat hatch or floor hatch cover, truck Camper RV bed, AD board, or home-build window, etc.; IMPORTANT: Suitable support weight is between 125 to 165 pounds;
  • 20" Replacement Lift Support Shocks - If you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click "ask seller" besides your order from us for immediate assistance!
Rank No. #18
BOXI 2 Pcs Tonneau Cover 4568 Lift Supports Extended Length 29.50 inches, Compressed Length 17.50 inches, Force 85 Lbs, 1/2" Ball Socket Metal Ends, PM2048,716821,SE1200M80PS100
  • Vehicle Location - Snug Top Tonneau Cover (PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
  • Extended Length [in] 29.50 , Compressed Length [in] 17.50
  • Force (lbs) 85.00
  • Body End Description Ball Socket Long Cup (Steel) Type=13mm=1/2"=.50" (PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
  • Shaft End Description Ball Socket Long Cup (Steel) Type=13mm=1/2"=.50"(PLEASE DOUBLE CHECK THE SIZE OF BALL STUD)
Rank No. #19
2 Truck Upfitters Gas Props for Undercover Tonneau Covers ONLY. 27.5" extended and 15.6" compressed length (measured from center of ball mounts), 38 pounds of pressure ea. Incl 4 ball mounts!
  • Truck Upfitters Pair of 38 pound gas struts. 27.5" extended length and 15.6" compressed length (measured from center of each ball mount). 29" overall extended length (measured from tip to tip).
  • PLEASE CHECK MEASUREMENTS BEFORE ORDER. THESE DO NOT FIT FIBERGLASS TONNEAUS. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Please see second picture for part dimension and details. Small flat screwdriver required for removal and re-installation.
  • Comes with four 10mm ball mounts for alternate 'other than camper shell' applications.
  • Equivalent to # GPSt270P or Stabilus # 0518. Fits all SE/Classic/Elite Undercovers except for Ford Sporttrac Undercover. Will NOT fit fiberglass / painted to match lids and tonneau covers..
  • Prime! Free Shipping! In Stock!
Rank No. #20
TriMark Counter Clockwise Pop-Up Locking T-Handle TM13946-01L
  • TriMark Pop-Up counter clockwise turn Style handle, non-threaded shaft
  • If a Lock Sock Rubber Cover is needed; use ASIN B00XWENQ02

Last update on 2021-05-05 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Snugtop Tonneau Cover Replacement Parts for our consumer to review. The reports above show ratings of the best overal, best cheap Snugtop Tonneau Cover Replacement Parts to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.