The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Sdr Lna of 2020 – Consumer Guide & Reviews

Rank No. #1
Nooelec Lana Barebones - Ultra Low-Noise Amplifier (LNA) Module for RF & Software Defined Radio (SDR). Wideband and Linear 20MHz-4000MHz Frequency Capability with Bias Tee & USB Power Options
  • A wideband (20MHz - 4GHz), high-performance, general purpose LNA module available at an extremely competitive price
  • Higher gain, lower noise figure, lower power consumption and better linearity than modules based on SPF5189Z and similar LNA MMICs
  • Can be powered through bias tee (3.3V-5V), USB, or DC power
  • Made in North America. 1 year warranty! A retail version with aluminum enclosure is also available, see Amazon product ID B07XNLJ9X2
Rank No. #2
WINSINN 0.1-2000MHz SDR LNA WideBand RF Amplifier 30DB High Gain Low Noise
  • ✔️Used for SDR, Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf signal amplification
  • ✔️0.1-2000MHz RF Wide Band Amplifier
  • ✔️Power supply voltage: 6-12V
  • ✔️Maximum power output: + 10dBm (10mW)
  • ✔️Made by WINSINN
Rank No. #3
ADS-B LNA High Performance Triple Filter Low NF Amplifier by RTL-SDR Blog
  • High performance ADS-B 1090 MHz LNA with triple filtering. Significantly improves ADSB range and number of decodes!
  • Unique triple filter design that ensures that the dongle and LNA will not overload from strong out of band signals.
  • 27dB Gain with a Noise Figure of ~1 dB
  • Over 60 dB's of out of band attenuation
  • Requires 3.3-5V bias tee power from an RTL-SDR V3 SDR dongle, or an external bias tee.
Rank No. #4
RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered
  • Frequency range of 50 MHz to 4000 MHz
  • Noise figure = 0.6dB @ 900 MHz
  • OIP3 = 39.5 dBm @ 900 MHz, P1 Saturation = 22.7 dBm @ 1960 MHz
  • Gain = 18.7 dB @ 900 MHz
  • Bias Tee Powered (Needs 3-5v bias tee power)
Rank No. #5
Nooelec Lana - Ultra Low-Noise Amplifier (LNA) Module for RF & Software Defined Radio (SDR) with Enclosure & Accessories. Wideband 20MHz-4000MHz Frequency Capability with Bias Tee & USB Power Options
  • A wideband (20MHz - 4GHz), high-performance, general purpose LNA module installed in a quality aluminum enclosure
  • Higher gain, lower noise figure, lower power consumption and better linearity than modules based on SPF5189Z and similar LNA MMICs
  • Can be powered through bias tee (3.3V-5V), USB, or DC power with the included adapter. A free male SMA to male SMA connector is also included
  • Made in North America. 2 year warranty!
Rank No. #6
Nooelec SAWbird+ NOAA - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA Applications. 137MHz Center Frequency
  • SAWbird+ NOAA is a self-contained LNA module designed for capturing beautiful weather images available from NOAA satellites (~137MHz)
  • The module uses 2 ultra-low-noise LNAs and a custom high-performance SAW filter centered at the frequency of interest
  • SAWbird+ NOAA can be powered in 3 ways: via bias tee, through the on-board microUSB connector, or through DC barrel connector with the included USB to DC connector adapter
  • Though compatible with most SDRs, we recommend use in conjunction with NESDR SMArTee (available on Amazon, product ID B079C4S2BT)
  • Includes free aluminum enclosure, male SMA to male SMA adapter and USB to DC barrel connector adapter. Full 2 year warranty and support direct through Nooelec!
Rank No. #7
0.01-4GHZ 21DB Wideband LNA Amplifier Module High Gain Low Noise Amplifier HAM Radio RTL SDR LNA Amplifier Broadband
  • Amplifier module with double sides by the process of immersion gold, brightness and smooth coating, good welding property, unconditionally stable
  • High Gain Low Noise LNA Amplifier, Maximum output power: P1dB +22dBm typical, +39.5 dBm Output IP3
  • Easy to use, excellent performance, uniformity and reliability. Bandwidth: 0.01-4GHZ
  • Noise coefficient: 1.3dB; Power supply voltage: typical +5V (typical current value 125mA)
  • Size:32 × 23mm / 1.26 × 0.91inch; Color: red + gold
Rank No. #8
Akozon RF Wideband Amplifier 0.01-4GHZ 1.3dB Gain 21dB@1.9G Low Noise for HAM Radio RTL SDR LNA Amplifier Module
  • 【Excellent Design】: This WideBand RF Amplifier has a wideband range of 0.01-4GHZ, and large dynamic range +21dB, maximum output power: P1dB +22dBm typical, and the noise factor is as low and 1.3dB
  • 【Standard Connectors】: Standard SMA female connectors are suitable for connecting most devices. The process of immersion gold improves reliability, not easy to corrode and fall off, and have beautiful appearance
  • 【Durable Use】: This product with wide frequency range, high gain, low noise figure. Durable material provides long term corrosion protection, even in salt air enviroments
  • 【Enhanced Connection】: Adopt the process of immersion gold, make the printed circuit surface is stable with color, brightness and smooth coating, good welding property. Ultra bandwidth, high frequency inductors and capacitors without resonant points
  • 【Application】: Widely used for high frequency or intermediate frequency preamplifier of radio receiver, high sensitivity amplifying circuit of electronic detection equipment, ransceiver wireless communication card, and tower mounted amplifier (TMA), combiner, repeaters, and distal/digital wireless broadband head equipment, etc
Rank No. #9
NESDR SMArTee v2 SDR - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based Software Defined Radio
  • An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR only! For a full package with an antenna bundle, please see http://www.amazon.com/dp/B079C4S2BT
  • Unmatched price & performance--redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed <0.5PPM tolerance out-of-the-box. This is at least 4x more accurate than units advertised as containing 1PPM TCXOs, which have up to a +/- 2PPM initial offset
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues--run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!
Rank No. #10
NooElec Low Noise Amplifier (LNA) & Saw Filter Module for Outernet and Other Inmarsat Applications
  • A complete LNA & SAW filter module for Inmarsat applications like the Outernet project
  • Very low 1dB nominal noise figure
  • Female SMA connectors on input and output for easy connectivity
  • Quad mounting holes for a variety of installation options
  • Powered via bias-tee, 3.0-5.5VDC. Low current consumption requirements of 35mA (max). Works great with NESDR SMArTee XTR! (Amazon SKU: B06Y1D7P48)
Rank No. #11
HUAZHU DC 12V 0.01-2000MHz 2GHz LNA Broadband RF Low Noise Amplifier Module VHF/UHF Gain 32dB AMP Board
  • Supply voltage: 12V DC
  • Gain: 32dB
  • The input and output impedance: 50Ω
  • Bandwidth: 1MHz to 2GHz (gain at different frequencies in different)
Rank No. #12
Nooelec Active Iridium Reception Bundle - Includes LNA & Filter Module, High Gain (3.1dBi) 1620MHz Patch Antenna, SMA DC Block, Cables & Adapters. Compatible with Most SDRs!
  • A high value antenna bundle designed for portable active Iridium reception
  • The bundle includes SAWbird+ IR (dual LNA and filter in aluminum enclosure), a high gain Iridium patch antenna, an SMA DC block, a male SMA to male SMA barrel adapter, a male SMA to male SMA pigtail cable, a micro USB cable, and a micro USB to barrel connector cable
  • The small Iridium patch antenna is meant for size-sensitive and portable applications. It is only 82mm x 80mm (3.25" x 3.10") and weighs just 25g (0.9oz). It has 3.1dBi of gain, a center frequency of 1620MHz, and a bandwidth of about 80MHz
  • Full 2 year warranty directly through Nooelec on all bundle components
Rank No. #13
HiLetgo 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier
  • 0.1-2000MHz RF Wide Band Amplifier
  • Operating frequency0.1-2000MHz
  • High Gain Low Noise LNA Amplifier
  • Maximum power output+10dBm 10mW
  • It's low in properties can be a perfect match various circuits as ideal amplifier buffer amplifiers.
SaleRank No. #14
fosa RF Wideband Amplifier Isolated Capacitor for HAM Radio RTL SDR LNA, Coaxial Feed Bias Tee 25k-100MHz for Fiber Optic Communications/Optical Modulation Drivers
  • High quality, sturdy and durable.
  • It consists of high frequency inductors and capacitors with ultra-wideband, near idealized and no resonance points.
  • Isolated Capacitor: Isolate DC to prevent DC voltage from leaking to subsequent circuits or test instruments.
  • High frequency inductance: Isolation of AC information to prevent high frequency signals from leaking into the power system.
  • Applications: Broadband amplifiers, fiber optic communications, optical modulation drivers, and other test and measurement applications.
SaleRank No. #15
5-3500MHz RF WideBand Amplifier 20dB High Gain Low Noise LNA Amplifier with Shielding Shell
  • 【Wide measure frequency】This amplifier has a wide frequency range of 5-3500MHz, and large dynamic range +20dBm@1dBP
  • 【Great performance】It has stable gain 20dB typical, and small noise figure 1.3dB typical
  • 【Main purpose】It is especially suitable for all kinds of radio frequency receiving front-end circuit to extend communication distance
  • 【Widely application】Widely used for short wave, FM radio, remote control receiver, cable TV signal amplifier, GPS satellite navigation, 2.4G bluetooth and WIFI receiver RF front-end that need low noise small signal RF to be amplified
  • 【Add shielding shell】The broadband low noise RF amplifier is designed with shielding shell
Rank No. #16
bobotron ADS-B+ Lna Filter ADS-B 1090mhz Bandpass Filter for Software Radio Sdr
  • 1G-1.2GHz
  • 100% Brand New and High Quality
  • ADS-B 1090 MHz bandpass filter, now add a low noise amplifier circuit on the same PCB board.
  • 5V Power supply
Rank No. #17
abcGoodefg Amplifier Bias Tee Wideband DC Blocker 10MHz-3GHz Radio Frequency Transformer RF Amplifier for HAM Radio RTL SDR LNA RF Amplifier Divider Bias Feeder Bias Tee 50V DC
  • Frequency of use: 10MHZ-3GHz
  • Loss: 0.3DB@1.5GHz
  • Voltage resistance: DC 50V
  • Limit current: 300MA
  • Package Included: 1 x 1MHz- 3GHz radio frequency transformer
Rank No. #18
Nooelec GOES Weather Satellite RTL-SDR Bundle - Includes NESDR SMArTee XTR Software Defined Radio, & Everything Else Needed to Receive LRIT, HRIT & HRPT Satellite Weather Images Directly from Space!
  • This bundle will allow you to receive detailed, high-resolution, near real-time images from orbiting weather satellites. With as little as an hour of setup, you will be receiving LRIT, HRIT and HRPT GOES transmissions, error-free and with ease!
  • This GOES Weather Satellite SDR bundle includes a GOES parabolic reflector antenna, NESDR SMArTee XTR SDR receiver, SAWbird+ GOES LNA module, 10m LMR400 cable, and the other cables and adapters required for a full GOES receiver. Just add a host device and software, and you are ready to go
  • The 21dBi antenna is meant for high gain L-band applications where the antenna is stationary. The center frequency is 1.75GHz, and bandwidth is 200MHz or greater. This encompasses many popular weather satellite applications and constellations
  • Software is required for the decoding of images. Current options are either free Linux-based decoders or a paid version of XRIT Decoder for Windows (a license is NOT included in this bundle!). A virtual machine can be used for Linux instead of a standalone Linux computer or Raspberry Pi, if preferred.
  • IMPORTANT: This bundle is NOT suitable for EWS-G1 reception (formerly GOES-13)! If there are questions about your particular application, please contact our support team for assistance! support.nooelec.com
Rank No. #19
Superbat RF coaxial SMA Male to SMA Female Bulkhead RG174 15ft Cable + 3pcs RF Coax SMA Adapter Kit for SDR Equipment Antenna Ham Radio,3G 4G LTE Antenna,ADS-B,GPS and etc
  • Cable: RF SMA Male to SMA Female Bulkhead Connector RG174 Cable 5m/16.4ft Impedance:50 Ohm
  • Adapter : SMA Male to Male Adapter / SMA Male to Female Adapter / SMA Female to Female Adapter Impedance:50 Ohm
  • Cable + connectors can make cable into:1.SMA Male to Male 2.SMA female to female | So this product can meet your diversified needs.
  • Application: Used for the Network system,security system,FPV devices,Wifi router,signal booster,WLAN Wifi antenna,Radio,Video,3G 4G LTE Antenna,GPS antenna,module etc.
  • Package: 1x SMA Adapter Cable + 3pcs SMA adapters
Rank No. #20
Lana HF Barebones - Ultra Low-Noise LF, MF & HF Amplifier (LNA) Module for RF & Software Defined Radio (SDR). Wideband 50kHz-150MHz Frequency Capability with Bias Tee & USB Power Options
  • A wideband, high-performance, high-linearity LNA module designed specifically for HF applications
  • High gain, very low noise figure, and very low power consumption of <30mA
  • Can be powered through bias tee (3.3V-5V), USB power, or DC power via power header
  • Made in North America. 1 year warranty!

Last update on 2021-01-17 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Sdr Lna for our consumer to review. The reports above show ratings of the best overal, best cheap Sdr Lna to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.