The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Screw Jacks For House Leveling of 2020 – Consumer Guide & Reviews

SaleRank No. #1
Vestil FJB-16 Basement Floor Jack, 12" - 16" Height Range, Maximum Height Capacity (lbs.) 9738, Minimum Height Capacity (lbs.) 9738
  • Jack provides support for leveling and stabilizing floor beams
  • The telescopic style positions the brace for better leveling
  • Includes a screw and turning bar for easy height adjustment
  • Steel construction with red oxide finish for optimal durability
  • Removable pins
SaleRank No. #2
Akron Adjustable Floor Jack (Model C-4), Akron Jacks Floor Jacks, Telescoping Jack For Temporary Support, Size Range 1'-1' 3" (2 Pack)
  • HEAVY DUTY FLOOR JACK - Premium quality, durable high-carbon steel floor jack. Coated to prevent corrosion. Self-centering plates (size: 4” x 5” x 0.82” minimum thickness) constructed to mitigate movement and prevent dishing.
  • ADJUSTABLE FLOOR JACK DESIGNED FOR A CUSTOM FIT - This all-in-one jack stand is easy to assemble and install. All moving parts fit snugly to avoid lateral displacement, and the top and bottom plates are deeply embossed to mitigate movement and prevent dishing.
  • SAFE - Akron floor jacks are fully adjustable and come with a double carriage lock for added strength and safety.
  • TEMPORARY OR SECONDARY SUPPORT - Perfect temporary or additional support for primary areas such as stairs, porches, decks, crawl spaces and heavy load areas. This service jack can also be used permanently as a secondary support.
  • SPECIFICATIONS - Size Range: 1'-1' 3", Weight: 8 lbs., Unit Cube: 0.2, Compression Load Range: up to 18,000 lbs.
SaleRank No. #3
JET SJ-5T 5-Ton Screw Jack
  • Contractor quality mechanical jack for all purpose lifts and supports
  • Holds heavy loads indefinitely will not creep
  • Heavy duty bell shaped cast base
  • Less effort required to lift capacity load with new design
  • Corrugated steel swivel head turns easily under load
Rank No. #4
BISupply Basement Floor Jacks – 16in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks
  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks; Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack; These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion; Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate; ISO9001 certified for strength and durability
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements; The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity; Install the base plate on a stable concrete slab under the area you wish to support; Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack; Always grease threads before use (grease not included)
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks; Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack; Ideal for home and industrial settings; Not designed for use as permanent supports
Rank No. #5
AKRON PRODUCTS C-79 Floor Jack, 4'5"-7'9"
  • Adjustable, easy-to-assemble, easy-to-install floor jacks are designed for temporary support during remodeling projects to reinforce stairs, porches, decks, or weak floors
  • This product is manufactured in united states
  • This product meets customer requirement
SaleRank No. #6
Akron Products Adjustable Shore Jack - 4x4
  • SHORING JACK - Transforms a nominal 4 x 4 lumber into an adjustable building product.
  • NON-PRIMARY SUPPORT - Recommended as a temporary or non-primary support.
  • HEAVY DUTY - Load capacity dependent on a 4 x 4 used up to 24,700 lbs.
  • ADJUSTABLE - Easy to assemble, easy to install.
  • MULTIPLE USES - Construction projects, Repairs or installations, renovations, sagging floors, and more.
Rank No. #7
Vestil FJB-100 Basement Floor Jack, 54" - 100" Height Range, Maximum Height Capacity (lbs.) 5600, Minimum Height Capacity (lbs.) 8438
  • Jack provides support for leveling and stabilizing floor beams
  • The telescopic style positions the brace for better leveling
  • Includes a screw and turning bar for easy height adjustment
  • Steel construction with red oxide finish for optimal durability
  • The hardware is shipped inside the tube to ensure that it is not lost
Rank No. #8
Vestil FJB-150 Basement Floor Jack, 54" - 150" Height Range, Maximum Height Capacity (lbs.) 2588, Minimum Height Capacity (lbs.) 11200
  • Jack provides support for leveling and stabilizing floor beams
  • The telescopic style positions the brace for better leveling
  • Includes a screw and turning bar for easy height adjustment
  • Steel construction with red oxide finish for optimal durability
  • Turn Bar and Pins are stored inside the inner tube for shipping.
Rank No. #9
Adjustable Floor Jack Post 15 Gauge - Size Range 1'-1'3" (2 Pack)
  • Compression Load Range* 18,000 lbs.
  • Premium quality heavy duty high carbon steel
  • Finished with corrosion-resistant powder (exceeds ASTM-B117-85)
  • Adjustable, easy to assemble, easy to install
  • Double locked for added safety
SaleRank No. #10
Camco Olympian Aluminum Stack Jacks, Stabilize, Position And Level Your RV, Trailer Or Camper, Can Support Up to 6,000 lbs, Extends 17" - (4 Pack) (44560)
  • Stabilizes and Levels your RV: Designed to get secure and level RV positioning and stability
  • Superior Strength: Each jack supports up to 6000 pound
  • Durable Construction: Made of cast aluminum
  • Adjustable: Extends from 11 inch to 17 inch
  • Includes: Comes with a set of (4) stack jacks
Rank No. #11
Ellis Manufacturing Company Mini Screw Jack - Adjustable Support Jack - Range of Adjustment 2.5" - Safe Load Capacity (15,000 lbs)
  • MINI SCREW JACK: The Ellis Mini Screw Jack is Ellis' shortest adjustable support jack. Although the Mini Screw Jack is small in size, it is big in strength and durability. Combine this product with the Ellis Mini Jack Turning Bar to maximize leverage and capability.
  • EASY TO USE: To make adjustments to the height of the Mini Screw Jack, simply turn the turning wheel until you reach your desired height. A 3/4" round rod can be used for extra leverage if necessary. The top plate of the Mini Jack will swivel independently from the wheel.
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely versatile and useful in small spaces. The Mini Screw Jack has a safe load capacity of 15,000 lbs and a lifting capacity of 3,000 lbs. This product includes a safety lock set screw to ensure security.
  • SPECIFICATIONS: Range of Adjustment: 2.5", Safe Load Capacity: 15,000 lbs, Weight: 10 lbs, Overall Height Screwed Down: 6-1/2", Overall Height Fully Extended: 9", Base Plate: 4" Sq. , Top Plate: 4" Sq. , Acme Screw Size: 1-1/4", Lifting Capacity: 3,000 lbs w/ 12" Turning Bar
  • TRUST IN ELLIS: Ellis Manufacturing Company has been a leading manufacturer of construction materials since 1951. Our primary focus has always been on shoring equipment for commercial and residential construction. Ellis is dedicated to providing unbeatable quality, affordability, and customer service.
Rank No. #12
Lally Column - Mini - Adjustable Steel Building Column 4" OD, 11 Gauge, 4" Adjustment Range - Perfect For Permanent Crawl Space Supports.
  • Use for construction projects, repairs or installations, renovations, sagging floors or crawl spaces.
  • 12" 16" Adjustable Screw Assembly
  • 11 Guage Steel 4 Inch Diameter - Professional Grade
  • Load Rated at 28,700 lbs
  • Permanent Basement Support Posts
Rank No. #13
Strongway 5-Ton Screw Jack
  • Constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • Operates at full capacity in tension or compression mode, upright or inverted
  • Self-locking design provides added safety
SaleRank No. #14
Tiger Brand Jack Post JS-55 - Size Range 2'10"-4'7" (15Ga)
  • DURABLE - Premium quality, heavy duty high carbon steel
  • ADJUSTABLE - Easy to assemble, easy to install
  • HEAVY DUTY - Corrects sagging floors, supports basement beams and stairwells, and more
  • SAFE - Double locked for added safety
  • SECONDARY SUPPORT - Can be used permanently if as a secondary support
SaleRank No. #15
Dumble RV Stabilizer Jacks Camper Leveling Blocks 4-Pack – Heavy Duty Leveling Blocks for Trailer, Camper, Motorhome
  • NO MORE SWAYING: Use the Dumble | Camper Stabilizer RV Leveling Blocks to stabilize, secure, and level your RV, camper, or travel trailer; Transfer weight on a constant vertical plane, support a car in storage to save from a tire going flat, use on trailer with single axle to keep the trailer from tipping back with too much weight in the wrong places, use under weak steps, or place in crawl space to stop floor creaks and rattles; For stabilizing only recreational vehicles – Do not use to raise
  • FITS YOUR RV & TRAILER: Adjustable from 11.5 inches to 17.5 inches (29.2cm to 44.5cm); Make sure the height is correct for your use; Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod; Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application
  • BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT); All components constructed from aluminum for maximum strength and longevity that resists corrosion; RV levelers nest into each other (stack) for storage
  • EASY TO USE: The long bolt in the center of the jack stand is threaded; At the top of the jack stand is a large nut that fits into a pocket to keep it from turning; The center bolt raises and lowers by turning the long bolt with the T-handle, either clockwise or counter-clockwise; Place under a section of sub frame close to the corners; We recommend using wood or concrete blocks under jacks
  • PACKAGE CONTENTS: Package includes (4) RV leveling jacks to support a total of 24,000 pounds (10,886kg)
Rank No. #16
Ellis Manufacturing Company 4x4 Screw Jack - Adjustable Support - Safe Load Capacity (15,000 lbs) - Painted Finish
  • SCREW JACK: The Ellis 4x4 Screw Jack is an extremely versatile product that will allow you to create an adjustable support of any length with your own 4x4 lumber. This product is designed to provide structural support in residential, commercial, trench, and collapse rescue shoring applications.
  • EASY TO USE: Designed to provide either vertical or horizontal support, this adjustable screw jack is functional, strong, and heavy duty. To adjust the height of the screw jack, simply turn the "U" shaped handle until you reach your desired height. Lock the Safety Screw in to set the height for long term support applications.
  • SAFE & SECURE: Built with high quality steel, this screw jack is designed to be long lasting and durable. This product is equipped with a safety lock, you can tighten the safety lock with an allen wrench once the final adjustment has been made.
  • SPECIFICATIONS: Safe Load Capacity: 15,000 lbs, Weight: 12 lbs, Minimum Overall Height: 14.25", Full 6" Adjustment with 1.25" dia. Acme Threaded Screw, Type of Finish: Painted
  • TRUST IN ELLIS: Ellis Manufacturing Company has been a leading manufacturer of construction materials since 1951. Our primary focus has always been on shoring equipment for commercial and residential construction. Ellis is dedicated to providing unbeatable quality, affordability, and customer service.
Rank No. #17
CBM Scaffold 24" Adjustable Leveling Screw Jack with 1 1/4" OD Model# SJHL1
  • Brand New ONE 24" x 1 1/4" Galvanized Screw Jack with Base Plate 18" adjustable Thread,
Rank No. #18
Ellis Manufacturing Company - Light Duty Steel Shores & Jack Post - 85" - 109" Range of Adjustment - 5,000 lb Safe Load Capacity - Adjustable Jack for Temporary or Permanent Support
  • LIGHT DUTY STEEL SHORE: The Ellis Light Duty Steel Shore is an adjustable support jack that provides temporary or permanant support. This functional and dynamic jack post is the perfect tool for any residential or commercial construction project.
  • EASY TO USE: Simply turn the wing nut to adjust the height. Once the desired height has been reached use a 6mm Allen wrench to tighten the set screw located on the side of the wing nut. This will lock the wing nut into place to keep the shore from further adjustment.
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely powerful and long-lasting. The light duty steel shore is a perfect solution for sagging floors and foundation issues. It provides additional support in crawl spaces, attics, decks, wood, steel, and concrete beams.
  • SPECIFICATIONS: Weight 44 lb, Range of Adjustment: 85" - 109", Safe Load Capacity: 5,000 lbs, Wing Nut: 8.75" Long Galvanized, Top Plate: 3/8x 6/6" Steel Plate, 4-3/8" Holes, Base Plate: 3x8"x6" x6" 4- 3/8" Holes, Acme Screw - 1-7/8" Diameter, Pipe - 2" Sced. 42
  • TRUST IN ELLIS: Ellis Manufacturing Company has been a leading manufacturer of construction materials since 1951. Our primary focus has always been on shoring equipment for commercial and residential construction. Ellis is dedicated to providing unbeatable quality, affordability, and customer service.
Rank No. #19
Akron Adjustable Floor Jack (Model C-3), Akron Jacks Floor Jacks, Telescoping Jack For Temporary Support, Size Range 1'7"-3'
  • HEAVY DUTY FLOOR JACK - Premium quality, durable high-carbon steel floor jack. Coated to prevent corrosion. Self-centering plates (size: 4” x 5” x 0.82” minimum thickness) constructed to mitigate movement and prevent dishing.
  • ADJUSTABLE FLOOR JACK DESIGNED FOR A CUSTOM FIT - This all-in-one jack stand is easy to assemble and install. All moving parts fit snugly to avoid lateral displacement, and the top and bottom plates are deeply embossed to mitigate movement and prevent dishing.
  • SAFE - Fully adjustable jack posts come with double carriage lock construction for added strength and safety.
  • TEMPORARY OR SECONDARY SUPPORT - Perfect temporary or additional support for primary areas such as stairs, porches, decks, crawl spaces and heavy load areas. Can also be used permanently as a secondary support.
  • SPECIFICATIONS - Size Range: 1' 7" - 3', Weight: 8 lbs., Unit Cube: 0.2, Compression Load Range: up to 18,000 lbs.
SaleRank No. #20
BISupply Basement Floor Jacks – 36in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks
  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks; Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack; These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion; Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins; ISO9001 certified for strength and durability
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements; The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends; Min height has a 9,700-pound (4,400 kg) capacity; Max height has a 6,800-pound (3,084 kg) capacity; Install base plate on a stable concrete slab under the area you wish to support; Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack; Always grease threads before use (grease not included)
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses with these adjustable floor jacks; Use as basement support posts, ceiling jacks, crawl space support jacks, or screw jacks home leveling post floor jack; Ideal for home and industrial settings; Not designed for use as permanent supports

Last update on 2020-10-20 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Screw Jacks For House Leveling for our consumer to review. The reports above show ratings of the best overal, best cheap Screw Jacks For House Leveling to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.