The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Scooter Oil Catch Can of 2020 – Consumer Guide & Reviews

Rank No. #1
GY6 50 125 150 Performance Oil Cooler Kit/Crankcase Breather/Oil Catch Can/Crankcase Vent Oil Decompression Kit
  • Description: Scooter/Motorcycle Performance Oil Cooler Kit
  • This is Size S. The Canister diameter is 38mm. 19mm coarse thread!!)
  • Material: Stainless Steel, no worry about gathering rust.
  • Application: Scooter GY6-50, GY6-125,GY6-150; Motorcycle CG125, CG150, and more.
  • It will fit as long as the bolt thread of your oil guage is 19mm Coarse Thread. This item does not fit Suzuki EN125, GS125,GN125, GN125H which has oil gauge of 19mm fine pitch thread. This item does not fit Yamaha JOG100, RS100, RSZ100, BWS100, AEROX100 either as the oil gauge of these models is 25mm. Dimension: as pictured below: The Oil Line is 58cm long.
Rank No. #2
SPEEDWOW Oil Catch Can Air Breather Tank Filter Baffled With Hose Kit Universal Red
  • Keep Engine Clean: The baffle system in the tank could catch the oil and moisture from PCV/CCV air, prevent misfires due to carbon accumulation, keep the engine clean and prolongs engine life.
  • Filtered Breather that traps oil while allowing air to escape freely, and the baffle system in the oil tank also could filter the air, reduce oil and gas into the intake manifold. Don't use the filter on a PCV system, you'll just break the vacuum and cause engine problems. The filter is for pre-PCV cars.
  • NBR 3/8" Fuel Line: Excellent oil resistance (resistance to mineral oil, liquid fuel), high wear resistance, good heat resistance. You don't need to buy an additional hose.
  • Removable baffle that can store additional filter media. Steel wool as a gift can better filter the oil and make the engine cleaner.Fully Tig welded and come with an o-ring gasket, hose clamps to prevent oil leakage. Built-in dipstick to check fluid level and removable bottom to drain make it reusable.
  • WARRANTY- SPEEDWOW provides oil catch can have a 4-month warranty. If you have any other problem, contacting us and we will serve you within 24 hours.
Rank No. #3
K&N Vent Air Filter/Breather: High Performance, Premium, Washable, Replacement Engine Filter: Flange Diameter: 0.375 In, Filter Height: 1.75 In, Flange Length: 0.5 In, Shape: Breather, 62-1600RD
  • ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration. Clogged or dirty air filters can reduce your vehicle’s acceleration by up to 10%.
  • EASY INSTALLATION: Pre-oiled and built with simple clamp-on design. One of the easiest and most cost-effective upgrades for your vehicle for quick performance gains.
  • SAVES MONEY: K&N high-flow replacement air filters will save you $250 over 10 years by avoiding disposable filters.
  • ECO-FRIENDLY: Using a washable, reusable product helps reduce replacement waste. A K&N filter will last longer than 10 disposable filters.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants.
Rank No. #4
muge racing Universal Oil Catch Can Tank Kit Polish Baffled Reservoir with Breather Filter with 3/8" Fuel Line,Aluminum,Black,400ml
  • √ UNIVERSAL&400ML - The air oil separator catch can kit fits for most cars and small parts of motorcycles. And the capacity of the polish baffled reservoir is 400ml,enough for daily use.
  • √ HIGH QUALITY - The oil catch can is made of lightweight aluminum for strong strength and durability,(NOTE:It's easy to scratch because it's made of aluminum, do not affect usage effect,But Any questions,please feel free to contact us to solve your problem).Anodized finished body has great appearance.
  • √ FUNCTION - Collect steam from the crankcase,Reduce the amount of steam entering the intake branch,Reduce the probability of secondary combustion,Reduce carbon deposition.
  • √ UPGRADE STRUCTURE - The baffle could cool hot oil vapor and turn into liquid and catching the oil and moisture oil vapor, keeps engine clean and prolongs engine life.The hose clamp reinforcement to prevent the hose from falling off. Three different sizes of adapters can fit for different size hose and come with o-ring gasket to prevent oil leakage. Built in dipstick to check fluid level without opening it frequently,You could use the breather filter as a vented.
  • √ 2 TYPES OF INSTALLATION - Easy to install oil catch can with breather filter as a vent system or without breather filter as a seal can, all for your option.
Rank No. #5
OEM TOOLS 87017 Low Profile Oil Drain Pan 2.8 Quart,Black
  • Dimensions: 15. 9 inches x 8. 5 inches x 2. 68 inches
  • Capacity: 2. 8 quarts
  • Made of heavy duty, chemical resistant plastic
  • Please discard old oil and fluids responsibly
Rank No. #6
UNO
  • ​UNO is the classic family card game that's easy to learn and so much fun to play
  • ​In a race to deplete your hand, match one of your cards with the current card shown on top of the deck by either color or number.
  • ​Strategize to defeat your competition with special action cards like Skips, Reverses, Draw Twos and color-changing Wild cards.
  • ​When you're down to one card, don't forget to shout "UNO"
  • ​This fun family card game is perfect for adults, teens and kids 7 years old and up.
Rank No. #7
Ruien Polish Baffled Universal Aluminum Oil Catch Can Reservoir Tank Black
  • 100% brand new oil catch tank can.
  • The oil catch tank is made of aluminum, will be light weight, long lasting!
  • The size and color of the oil catch tank:as the pictures show
  • package includes: as the picture shows
  • The oil catch tank has both fashion appearance and excellent performance !
Rank No. #8
Toolly Polish Baffled Universal Oil Catch Can Reservoir Tank Breather Filter Kit with 3/8" NBR Fuel Line Aluminum
  • 🚗【300ML Capacity & Universal】The capacity is 300ml, enough for daily use. Universal for most cars and small parts of motorcycles. Diameter: 2.68in / 68mm. Height: 4.45in / 113mm. It reusable when it gets too full of oil you have to empty it then reinstall
  • 🚗【2 Types Of Installation】Easy to install oil catch can with breather filter as a vent system or without breather filter as a seal can, all for your option
  • 🚗【Structure】Updated air oil separator catch can provides a NBR 3/8" fuel line (Length:0.8M). Use the hose clamp reinforcement to prevent the hose from falling off. Three different sizes of adapters can fit for different size hose and come with o-ring gasket to prevent oil leakage. Built in dipstick to check fluid level without opening it frequently
  • 🚗【Superior Quality】Polish baffled oil catch can is made of lightweight T-6061 aluminum for strong strength and good durability (Notice: It's easy to scratch because it's made of aluminum, do not affect usage effect). Anodized finished body has great appearance
  • 🚗【Come with Oil Dipstick】It is convenient to check the fluid level in catch can by oil dipstick without opening it frequently
Rank No. #9
Heady Shake Pro Skateboard Bearings - Fastest Premium 608rs Titanium - Longboard, Skate Board, Kick Scooter, Inline and Roller Skates, 8-Pack (Darkside Set + Speed Oil)
  • ULTRA SMOOTH, ULTRA-FAST – These precision skateboard bearings are pre-lubricated with special lubricant to make the fastest, smoothest bearings out.
  • UNMATCHED PRECISION DESIGN – Heady Shake bearings for skateboards offer a quiet rotation, high-spinning speed, and long-lasting durability for more efficient support.
  • BLAZING SPEEDS FOR ALL YOUR GEAR – These top-quality bearings can be used for a variety of skates, including inline and roller skates, longboards, skateboards and kick scooters.
  • HIT THE SKATE PARK IN STYLE – These inline bearings don’t just boast sleek, skater-friendly designs, they come complete with 8 professional-grade bearings, 4 skateboard spacers, and a waterproof sticker.
  • GUARANTEED SATISFACTION – Heady Shake longboard bearings are backed by superior craftsmanship, reliability, and a true satisfaction guarantee. We’ll refund your money 100% if you aren’t completely happy.
SaleRank No. #10
VersaTex Multi-Purpose Rubber Floor Mat for Indoor or Outdoor Use, Utility Mat for Entryway, Home Gym, Exercise Equipment, Tool Box Liner, Garage Mat, Under-Sink, Patio, and Door Mat; 30" x 48", Black
  • PROTECT FLOORS FROM DAMAGE: VersaTex mats protect entryway flooring. The front door mat can be used in any entrance to replace rugs and welcome mats. Safe to use on any hard floor or carpeted surface, VersaTex mats can be installed on wood floors, tile, concrete, low pile carpet, or other flooring types.
  • DURABLE RECYCLED RUBBER MAT: Your VersaTex mat is made from recycled rubber materials in the USA. Waterproof and easy to clean, the non-porous door mat will repel water and dirt. The strong floor mats for home or businesses won't rip or tear, and are lightly textured.
  • INDOOR OUTDOOR MAT: These rubber mats are perfect to use as an inside door mat or outside door mat. Perfect as a kitchen mat to protect the surfaces under the sink from water, cleaners or soaps, place as a back door mat outdoors, or under dog bowls.
  • EXERCISE EQUIPMENT MATS: Use the rectangular rubber mat under home gym equipment to protect flooring from wear and vibration. As an exercise bike mat, weight bench mat, recumbent bike mat, and stair climber mat, VersaTex mats protect the floor in your workout area, home gym, basement, or anywhere you workout.
  • USE ANYWHERE: VersaTex mats can be used to protect floors and surfaces in any environment: home, offices, lobbies, garages, home gyms, workshops, kitchen, patios, entryways, laundry rooms, craft rooms, and more! VersaTex mats are also easy to cut, so you can use them as toolbox drawer liners, on top of craft tables, as a workbench mat, or anywhere!
Rank No. #11
EVIL ENERGY Polish Baffled Universal Oil Catch Can Reservoir Tank Breather Filter Kit Aluminum
  • Universal : This air oil separator catch can capacity is 300ml, enough for daily use. Universal for most cars and small parts of motorcycles. Diameter: 2.68in / 68mm. Height: 4.45in / 113mm. It reusable when it gets too full of oil you have to empty it then reinstall
  • Structure : Use the hose clamp reinforcement to prevent the hose from falling off. Three different sizes of adapters can fit for different size hose and come with o-ring gasket to prevent oil leakage. Built in dipstick to check fluid level without opening it frequently.(The hose come with is just a gift for free.It's not a vacuum hose and can't resist high temperature. You'd better get another rubber vacuum hose)
  • Material:Polish baffled oil catch can is made of lightweight T-6061 aluminum for strong strength and good durability (Notice: It's easy to scratch because it's made of aluminum, do not affect usage effect). Anodized finished body has great appearance
  • 2 Types Of Installation:Easy to install oil catch can with breather filter as a vent system or without breather filter as a seal can, all for your option
  • We value your shopping experience and strive to offer a high-quality product and service. If you encounter any problems during the installation process, feel free to contact us via Amazon Mail
Rank No. #12
TASAN RACING Universal Aluminum Baffled 2 Port Oil Catch Can/Tank/Air-Oil Separator Black + Oil Drain Cock Valve
  • Separates Oil Particles from PCV/CCV Air Using 50 Micron Bronze Filter
  • 100% Billet T6061 Aluminum Sealed Can
  • Features 1 Inlet and 1 Outlet
  • Internal Air Diverter Turbulates Air Longer to Improve Oil Separation
  • The Maxed Capacity of the Tank is 5 oz(About 150ml), Small but Easy to Clean, Universal Fit for Most Cars
Rank No. #13
LTI Premium Quality Aluminum Universal 300ml Oil Catch Can Reservoir Tank with Breather Filter Kit Compact Dual Cylinder (Silver)
  • The oil catch can be made of high quality T6061 aluminum material. Aluminum alloy is characterized by fast heat dissipation to facilitate the collection of more oil. Enhanced strength and Durability, anodized finish body presents a fashion appearance
  • This air oil separator catch can capacity is 300ml, enough for daily use. Universal for most cars and small parts of motorcycles. Diameter: 2.68in / 68mm. Height: 4.45in / 113mm. It reusable when it gets too full of oil you have to empty it then reinstall
  • Oil Catch Can Kit is fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage. You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily. Have 2 types Of Installation: Easy to install oil catch can with breather filter as a vent system or without breather filter as a seal can, all for your option.
  • Keep engine clean, polish baffled oil catch can kit prevents sludge from accumulating in the valve and intake manifold, keeping the engine clean. Increase horsepower and maintain engine life by removing oil from the PCV valve from the intake manifold.
  • 100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems. 24 months warranty from the date of purchased
Rank No. #14
Vincos Black Polish Baffled Universal Aluminum Oil Catch Can Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit 3/8" 9/16" 400ml
  • ✔ 【BILLET AEROSPACE 6061 ALUMINUM】Made of High Quality Aluminum for Enhanced Strength and Durability.Recommend this mod to anyone who really cars about long term performance.
  • ✔ 【INCREASES HORSEPOWER & PRESERVE ENGINE LIFE & KEEP ENGINE CLEAN】This oil catch tank catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine.The catch can will keep out the dirt and oil get inside your engine from your intake system. To keep engine clean , Increases horsepower and Preserve Engine Life
  • ✔ 【PREVENTS OIL LEAKAGE】Fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil leakage.
  • ✔ 【REUSABLE & EASY TO CLEAN】you can actually clean the catch can very easily even without dismounting it, you just need to unscrew the bottom part of the reservoir and you have complete access to clean everything.
  • ✔ 【Accessory】9mm & 15mm Fitting / size 4.25" high x 2.25" diameter , 9MM and 15MM fitting will work with any car
Rank No. #15
Oil Catch Can, Universal Compact Car Truck Oil Catch Tank Baffled 2 Port Oil Catch Breather Reservior with 2fl oz Capacity (2 port oil catch can)
  • 【Universal】: 100% billet 6061 aluminum sealed can. Universal mounting bracket for different configurations.
  • 【Safe to Use】: Defends intercooler, intake system, and essential components from oil blow-by. Helps maintain proper octane levels to reduce potential detonation. Safe for pressurized applications.
  • 【Imporve Oil Separation】: Internal air diverter turbulates air longer to improve oil separation.
  • 【2 Ports】: Features one inlet and one outlet. Filter and can are both fully serviceable. Includes 2 plastic barbed 1/2 inch hose fittings.
  • 【Fast Shipment】: This oil catch can will be shipped from USA warehouse, you can receive it wihin 4-7days.
Rank No. #16
13mm Universal Car Clamp-On Cold Intake Air Filter, High Flow Auto Air Intake Filter Round Tapered for Scooter Atv Dirt Pit Bike Motorcycle Crankcase Vent Cover Breather(Blue)
  • ★ Universal Air Take Filter: fitment for vehicles with 12mm air intakes, for most Off-road Motorcycle ATV Quad Dirt Pit Bike. High flow replacement car intake filter designed to fit perfectly in your stock airbox
  • ★ Increase horsepower and Acceleration: The Air Filter is designed to boost engine horse power significantly, increase engine power and torque outpout, the car air filter prevents abrasive particulate matter from entering the engine's cylinders to ultimately increase horsepower and improve the gas mileage
  • ★ Air Induction Efficiency Drastically Improved: High flow intake air filter with excellent filtration can reduce the resistance of the engine air intake, and improve per unit time air intake and volumetric efficiency when engine running
  • ★ High Quality: Professional manufacturing, stable characteristics and high reliability. Different colors for choice. Easy and simple installation
  • ★ 100% Gurantee: 100% test before shipping to ensure product perfect, stability and durability and we provide 100% perfect customer service, any questions please fell free to contact us and we promise to give you the best in customer care!
Rank No. #17
Genesis Universal 1 Person Brake Bleeder Bottle with a Stainless Steel Cable Mount and 12 Inch Fluid Tube
  • One durable and oil resistant plastic 16 oz. bottles with flexible 12 inch fluid tube
  • Stainless steel lanyard cable mount on a self venting bottle for bleeding without any assistance
  • Our brake bleeder kit has been designed to make brake maintenance as easy as possible and help you get the job done from your garage without making excess mess
  • Easy to use with all types of brake systems including cars, motorcycles, ATVs, dirt bikes and scooters
Rank No. #18
GY6 50cc 125cc 150cc Oil Screen Cleaner Cap Drain Plug for Moped Scooter Baja Jonway Lance Baotian Benzhou Taotao QMB139 157QMJ Engine
  • Made of durable aluminum & rubber.
  • Suitable: for GY6 50cc to 150cc Chinese Moped Scooter Baja Jonway Lance Baotian Benzhou Taotao
  • Package Included:1 Set ( Drain Plug, O-Ring, Oil Filter, & Spring.)
SaleRank No. #19
GarageBOSS GB150 12.5 Quart Oil Drain Pan with Funnel
  • Integrated, wide mouth funnel for quick and clean fluid draining
  • Holds up to 12.5 quarts of either old oil or anti-freeze allowing you to change your fluids multiple times before recycling
  • Low profile to fit under the lowest cars
  • Durable construction, lie flat design and convenient carry handle for transport
  • Leak proof Caps keeps fluids contained for transport
Rank No. #20
VizGiz 3 Pack Universal Gaso line Gas Petrol Inline Oil Tank Liquid 1/4 Inch 0.5MM 0.6MM Fuel Filter Filters for Kawasaki Kohler Briggs & Stratton Small Engine ATV Scooter Motorcycle Lawn mowers
  • 3 Pack to Save Your Money
  • Can be used on many small tractors, lawn mowers, snowmobiles, garden tillers, go karts, generators with 1/4" 5MM 6MM fuel lines
  • Material: plastic and paper &metal
  • Universal Fits for John Deere, Kawasaki, Kohler, Briggs & Stratton engines
  • Input Outer Diameter: 7mm, Compatable Fuel Hose Inner Diameter: 5mm 6mm or 1/4 inch

Last update on 2021-02-14 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Scooter Oil Catch Can for our consumer to review. The reports above show ratings of the best overal, best cheap Scooter Oil Catch Can to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.