The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Sandvik End Mill Cutter of 2020 – Consumer Guide & Reviews

Rank No. #1
Sandvik Coromant R216.42 Carbide Ball Nose End Mill, Metric, TiAlN Monolayer Finish, 30 Deg Helix, 2 Flutes, 57mm Overall Length, 2mm Cutting Diameter, 6mm Shank Diameter
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Neck Length: 0.787 inches
Rank No. #2
Sandvik Coromant R216.23 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, Roughing Cut, 50 Deg Helix, 3 Flutes, 57mm Overall Length, 2mm Cutting Diameter, 6mm Shank Diameter, 0.5mm Corner Radius
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Geometry: H
Rank No. #3
Sandvik Coromant R215.H4 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, Non-Center Cutting, 50 Deg Helix, 4 Flutes, 104mm Overall Length, 20mm Cutting Diameter, 20mm Shank Diameter, 2mm Corner Radius
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
  • Round shanks allow use with a wide variety of toolholding systems
  • Shank Style: Cylindrical
  • Neck Length: 1.25 inches
Rank No. #5
WTP Trades - 1/4 inch .25" Square Nose TiAlN 4 Flute Carbide end Mill - for Cutting Steel, Stainless Steel and Alloy steels - HRC55 - .25" x .25" x .75" x 2.5"
  • HRC55 - Superior hardness for extended longevity and a high quality surface finish.
  • TiAlN Coating - Provides superior heat protection by reflecting heat back into metal chips rather than the tool. The TiAlN coating also performs exceptionally well in interrupted cuts making it versatile, cutting down on the verity of tools needed.
  • 4 Flute cutter - 4 Flutes increase the number of cutting surfaces for more aggressive machining while also making the tool stronger due to its thicker core structure.
  • Square nose - Creates a sharp inner corner when milling or a flat bottom when plunge cutting
  • Best for Steel, Steel alloys, stainless steel and other ferrous metals
Rank No. #6
Snapmaker CNC Bits (5 Bits)
  • High strength and hardness, durable in use
  • Chatter resistant design for superior surface finishes
  • Sharp cutting reasonable matched with high strength of cutter
  • Made of alloy steels/hardened steels, durable and practical to use
  • Application for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
Rank No. #7
New Part Fit for Komatsu PC35MR-1 Mini Excavator Top Roller Carrier Roller Upper Roller
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • A lots parts are listing,please double check
Rank No. #8
New Mini Excavator Track Roller/Bottom Roller for KUBOTA KX71-3
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • Please notice that We don’t accept the item return If you couldn’t make sure the item measurement, pls contact us
Rank No. #9
The Mini Excavator Track Roller/Bottom Roller for Yanmar VIO40-2,VIO45,VIO50,B50,VIO45-6
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by air
Rank No. #10
New Mini Excavator Top Roller/Carrier Roller for JCB JCB8040
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • save 3% each on Qualifying items offered when you purchase 2 or more
Rank No. #11
RIP Cutting Tools 6-PC 4-Flute SE AlTiN HP Carbide End Mill Set, Sizes 1/8-1/2
  • Solid Carbide End Mill
  • Altin Coated for Steels
  • 38-Degree High Helix
  • Made in the USA
  • 4-Flute
Rank No. #12
New Mini Excavator Track Roller/Bottom Roller for New Holland E35SR E35.2 E35.2SR
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • A lots parts are listing,please double check
Rank No. #13
New Mini Excavator Track Roller/Bottom Roller for Hanix H36
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • Please notice that We don’t accept the item return If you couldn’t make sure the item measurement, pls contact us
Rank No. #14
New Mini Excavator Track Roller/Bottom Roller for KUBOTA KH90
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • Please notice that We don’t accept the item return If you couldn’t make sure the item measurement, pls contact us
Rank No. #15
The Mini Excavator Front Idler for Kubota KX91-2
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • ave 3% each on Qualifying items offered when you purchase 15 or more
  • Please notice that We don’t accept the item return If you couldn’t make sure the item measurement, pls contact us
Rank No. #16
New Heavy Equipment Mini Excavator Front Idler Wheel Fit for Yanmar VIO27-2 Excavator Parts
  • A FL-TRACK Machinery Co, Limited has been a well-established professional manufacturing company, focused primarily on producing undercarriage spare parts for mini and large Excavator and bulldozer for more than 20 years. Our clients have been the well-known companies like Volvo, Caterpillar, Hitachi, Mitsubishi, Komatsu among many others.
  • Excellent quality and service
  • Perfect matching models
  • Shipping by air,shipping by fastest shipping office like DHL;FeDex
  • There are more than 1,000 kinds parts in stock,A lots parts are listing,if you can't find what you looking for,pls contact us.
Rank No. #17
New Heavy Equipment Mini Excavator Top Roller/Carrier Roller for 099-7549
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • Please notice that We don’t accept the item return If you couldn’t make sure the item measurement, pls contact us
Rank No. #18
New Mini Excavator Track Roller/Bottom Roller for Volvo EC15
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • Please notice that We don’t accept the item return If you couldn’t make sure the item measurement, pls contact us
Rank No. #19
The Mini Excavator Carrier Roller/Top Roller for SK60,SK70,PC60-7,E50.2SR.etc
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by air
Rank No. #20
New Part Fit for IHI IHI55N Mini Excavator Sprocket
  • We are manufacturer
  • Excellent quality an service
  • Perfect matching models
  • Shipping by DHL or FedEx
  • A lots parts are listing,please double check

Last update on 2021-06-04 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Sandvik End Mill Cutter for our consumer to review. The reports above show ratings of the best overal, best cheap Sandvik End Mill Cutter to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.