The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Saddle Bottle Cage Mount of 2020 – Consumer Guide & Reviews

Rank No. #1
Minoura Saddle Water Bottle Cage Mount, Single Cage
  • Behind-saddle mounted holder for extra water bottle cage or spare tube set
  • Good position for aerodynamics
  • Lightweight at 80 grams
  • Bottle Cage mounting screws included
  • Not compatible with I-Beam type saddle. Standard dual rail type only
Rank No. #2
Valdora Triathlon Bike Accessories Under Saddle Bottle Holder Dual Water Bottle Mount - Behind Seat
  • This behind bike saddle water bottle holder mount rack includes light weight aluminum bottle cage rack and screws for two bottle cages. It does not include the LED light, CO2 cartridges or inflator. These can be attached later.
  • Triathlon bike saddle bottle cage mount with multiple configurations. Single bike under seat bottle cage holder and dual behind saddle cage mount. The ideal behind saddle water bottle holder for triathlon and time trial bikes. An extraordinary water bottle holder attaching behind the seat. THE rear hydration system for behind bicycle saddles
  • Referred to as dual water bottle holders or seat bottle holders, these are so much more. The rack will also accommodate Valdora's bright red LED tail light, CO2 cartridges and a CO2 inflator (not included).
  • Behind Bike Saddle Bottle Holder: The cage mount that works with all ROUND standard saddle rails (not I beam). A necessary triathlon accessory.
  • Includes behind saddle bottle mount ONLY. If you are looking for a triathlon bike bottle holder you won't be disappointed. Easy access to rear mount bottle cages. The saddle rail bottle cage holder is easy to install.
Rank No. #3
Behind Saddle Double Water Bottle Cage Holder with LED Light. The Rear Hydration Triathlon Water Bottle Holder! Multi Bottle Configuration - (Does not Include Bottle Cages or CO2 as Pictured)
  • Behind saddle bottle mount rack and LED light are included. Does not include bottle cages or CO2 cartridges Pictures are to demonstrate optional ways the behind saddle bottle holder can be configured.
  • Triathlon Bike Behind Saddle Bottle Mount with multiple configurations. Single bike seat bottle holder or dual bottle cage mount. The ideal behind saddle water bottle holder for triathlon and time trial bikes. An extraordinary water bottle holder attaching behind seats. THE rear hydration system for behind bicycle saddles.
  • Referred to as dual water bottle holders or seat bottle holders, these are so much more. Included is a bright red LED light for safety. The rack will also accommodate two CO2 cartridges (not included).
  • Behind seat bottle cage mount works with all round standard saddle rails (not I beam, carbon or not round rails). A necessary triathlon accessory.
  • Hydration - Nutrition: Carry one bottle, two bottles, or three bottles. Your best friend while training for long distance triathlons. Triathlete stocking stuffer Christmas gift.
Rank No. #4
Panda Software SENQI Aluminum Bicycle Water Bottle Cage
  • This is an aluminum alloy double water bottle holder, it is mounted below the bike rear seat.It can be installed two single bottle cage, and very lightweight,so you could carry more water on your longer rides.
  • It has four colors:black,silver,blue,red.
  • Not compatible with i-beam type saddle. Standard dual rail type only.Use for road bikes, mountain bikes, TT.
  • VERY EASY TO INSTALL--Coming with 6 screws, installed in the backseat, extend installation of two water bottle cages, fits for long time riding or Long distance travel. Never worry about no water in halfway.
  • NOTE--This specific item is only the adapter so you need to either already have the cages or purchase them with this item.
Rank No. #5
VeloChampion Double Water Bottle Cage Mount Alloy Black Cycling Triathlon Bike
  • ✅DUAL BOTTLE SYSTEM: The VELOCHAMPION Double Water Bottle Cage Mount offers quick and easy access to water bottles during racing conditions with aerodynamic benefits.
  • ✅FULLY ADJUSTABLE: It mounts easily and adapts to almost any desired height or angle. The cage is very secure and once mounted correctly it does not move or come loose. It is made entirely of alloy metal, so is very durable.
  • ✅IDEAL FOR TRIATHLONS: With this rear mounted adaptor for bottles and cages, you will gain vital aerodynamic benefits during long distance triathlons.
  • ✅COMPATIBILITY: This Mount is compatible with most saddle types (not the i-beam type).
  • ✅ LEASE NOTE: Includes 1 x fully adjustable double water bottle cage holder mount/bracket (does NOT include the saddle, water bottles, bottle cages or bottle cage bolts)
Rank No. #6
Valdora Three Cage Water Bottle Cage Mount - Behind Saddle Water Bottle Mount - Includes Cages. Capable of Many configurations Including Carrying CO2 cartridges
  • Some images shown are for reference to show possible configurations. Here is what is included: alloy behind saddle hydration rack and three bottle cages. Note bottle and CO2 cartridges NOT included.
  • Triathlon Bike Saddle Bottle Mount with multiple configurations. Single bike seat bottle holder, dual bike mount or even three bicycle bottle cage mount. The ideal behind saddle water bottle holder for triathlon and time trial bikes. An extraordinary water bottle holder attaching behind seats. THE rear hydration system for behind bicycle saddles.
  • Referred to as dual water bottle holders or seat bottle holders, these are so much more. . The rack will also accommodate CO2 cartridges (not included).
  • Behind Seat bottle cage mount works with all round standard saddle rails (not I beam). A necessary triathlon accessory.
SaleRank No. #7
Tacx Seatpost Bottle Cage Holder
  • Mount one or two bottle cages) on the rails of a saddle
  • Adjustable angle and height
  • Ideal for triathlons, 165G
  • Country Of Origin : Netherlands
Rank No. #8
Bike Rear Saddle Bottle Cage Mount Bracket, Bike Seat Bottle Holder for Double Bicycle Kettle Water Bottle
  • HIGH QUALITY: This adapter is constructed by premium material, which is durable and anti-rust, suitable for any severe weather.
  • EASY INSTALL: You just need to fix the bracket on the back of saddle with the accessory, very simple to operate.
  • LARGE SIZE: This adapter can both hold two bottles at the same time. Enough for your outdoor riding
  • CONVENIENT: Specially designed for install in the saddle, save lots of space, it will not influence your riding.
  • GUARANTEE: If you are not satisfied with our product you received, you can send emails to us at any time. We will reply you instantly and help you solve your problem.
SaleRank No. #9
Origin8 HydroRail Double Seat Bracket
  • Forged alloy construction
  • Twin bottle cage drink system (holds 2 cycling bottles)
  • Mounts on most saddle rails
  • Fully angle adjustable for easy reach
  • Anodized and laser etched finish
Rank No. #10
Topeak CageMount , Black
  • Clamp Fits ø22~ø38 mm (shims included)
  • Material Engineering Grade Plastic / Steel
  • Mount Handlebar / Seat Post
  • Size (L x W x H) 7 x 2.7 x 7.5 cm / 2.8” x 1.1” x 2.8”
  • Weight 45 g / 1.58 oz
Rank No. #11
GORIX Bicycle Bottle Cage Adapter Mount Adjustable MTB Road Bike Handlebar Water Bottle Holder Seat Post Mount (GX-SDLBC) (Matt Black)
  • 【2,000 UNITS SOLD GLOBALLY!! 】【ADJUSTABLE ANGLE HOLDER】 Bottle cage holder attached to the saddle rail. Since various angles can be adjusted indirectly even after mounting, it is possible to adjust to an angle that does not interfere even if you sit on the saddle seat.
  • 【CAN BE ADAPTED TO THE SITUATION】 Very useful when you need a lot of bottles for a midsummer ride.
  • 【USEFUL IN HOT WEATHER】 It's recommended for those who want to install more cages, such as tool boxes and bottles and those with few cages to attach to the frame.
  • 【Size】(Mounting part):W:7.2~9.2xH:1.8xL1.5cm, (Cage Mounting part):W:1.3xH:7.5xL:0.5cm, (Weight):40g, (Saddle rail width that can be installed):(tips to tips)6~8cm Φ0.7~0.6cm,  (Adjustable angle) (Mountable cage):(Hole width(tips to tips))6.9cm Φ0.4cm (Fixing tool):Hex wrench 3/4mm (Tool not included)
Rank No. #12
WATERFLY Bike Saddle Bag Waterproof Bike Seat Bag Pouch Water Bottle Holder Mountain Road Bike
  • 【Waterproof Material】 Made of superior 900D polyester and PVC fabric, along with caulking treated waterproof zipper, this bike saddle bag is fully waterproof, perfectly protect your items against raindrops and moist
  • 【SEAT POST HEIGHT ATTENTION】Our bike bag under the seat is suitable for most bicycles whose Seatpost height is greater than 26cm like small E-bikes, Unicycles, Electric Scooters, Water bikes, road bikes, mountain bikes, Folding Bikes, and more. Please MEASURE your Seatpost height before purchase.
  • 【Double Water Bottle Holders】Mesh water bottle holders on both sides of the bike bag allow you to take 2 water bottles with you to keep enough water supply, The middle compartment inside the main pouch, ideal to keep your cycling necessaries and tools separately
  • 【Adjustable Velcro Straps】The Velcro straps on the back can be adjusted as you need, so it can grasp tightly on the bicycle and fit most types of bikes
  • 【Safe Reflective Strips】Reflective strips can be found on the front, on both side mesh pockets, as well as on the PVC edge, while a tail light can be hanged on the front strip, which makes you visible at night and ensures your safety while cycling
Rank No. #13
Dwawoo Bike Bottle Holder, Rear Saddle Bottle Cage Mount Bicycle Seat Bottle Holder Bottle Mount Bike Accessory
  • This adapter can be fixed very stable, not easy to fall off, so it can ensure your bottle safety.
  • Bike Bottle Holder is made of premium aluminium alloy, which is high strength, tough and durable to use.
  • This rack adapter can hold one or two bottle at the same time, great for long riding trip.
  • Suitable for almost all of bikes, an ideal accessory for cycling lovers!
  • GUARANTEE: If you are not satisfied with our product you received, you can send emails to us at any time. We will reply you instantly and help you solve your problem.
Rank No. #14
Lixada Bicycle Bottle Cage Adapter, Mount Adjustable MTB Road Bike Handlebar Water Bottle Holder Handlebar Seatpost
  • Made of AL 7075 CNC good finish and solid lightweight and durable.
  • Mounts to 30.9mm or 31.6mm seat post or 31.8mm handlebars via hinged mounting bracket.
  • Bracket turns 90 degrees to suit mounting position.
  • Complete with bolts.
Rank No. #15
Speedfil R3 Bicycle Rear Under The Saddle Carrier (R3 Single with Cage)
  • The Speedfil R3 adapts to almost any rider and saddle
  • Contains both dual and single mount options for training and racing
  • The dual option allows for two CO2 Cartridge storage. (cages, inflator and CO2 cartridges sold separately)
  • Lightweight configuration allows carrier to be tucked under most saddles for maximum aerodynamic benefit
  • NOTE: The R3 Rear Carrier is currently not compatible with ISM saddle model# PN3.0 and model #PN3.1
Rank No. #16
Valdora Tri Bike Bottle Holder Behind Saddle Multi Water Bottle Mount - Triathlon Bike Behind Saddle Water Bottle Cage Mount. (Mount ONLY. Does not Include Cages, LED, inflator, or CO2 cartridges.)
  • What is included? Behind Saddle Bottle Cage Holder Only. Perfect for long triathlon training rides. The most important tri accessory that you need to hang on your bike.
  • Triathlon Bike Saddle Bottle Mount with multiple configurations. Single bike seat bottle holder, dual bike bottle cage mount. Add a LED light and CO2 cartridges. The ideal behind saddle water bottle holder for triathlon and time trial bikes. An extraordinary water bottle holder that attaches behind tir bike seats. THE rear hydration system for behind bicycle saddles.
  • Adjustable. Detailed instructions included for easy installation. Referred to as dual water bottle holders or seat bottle holders, these are so much more. The rack can also be purchased with a LED light and/or bottle cages. Look for the listing with these options or add your own later. This listing is for RACK ONLY.
  • The behind seat bottle cage mount works with all round standard saddle rails (not I beam, non round or carbon). This rack is intended to be used with road racing bikes and triathlon bikes. Not intended for mountain bikes, cruisers, etc. See the pictures. Attaches to the horizontal section of the saddle rails. The behind saddle dual bottle cage holder is a necessary triathlon accessory. A great gift for a triathlete.
Rank No. #17
SKS Bottle Cage Adapter Mount for Bicycles, Black
  • Can be attached to almost any seatpost or tube.
  • Angular adjustment with the push of a button.
  • Features the SKS time-proven quick release mount system.
  • For use with all standard bottle cages.
Rank No. #18
TriSeven Premium Rear Carrier Set
  • 🚲 EASY MOUNT & RIDE: Quick & simple to install to the rail of your bike saddle, leaving more time for riding! We also threw in one of our complimentary composite water cages (fits most standard cycling water bottles), just because 😊 PLEASE NOTE: This product DOES NOT include a water bottle.
  • 🚲 PERFORMANCE DRIVEN: We develop all of our TriSeven gear with your riding experience in mind. Our Rear Carrier System is perfect for training and both half & full triathlons and Ironmans!
  • 🚲 PREMIUM DESIGN: Lightweight and strong build of aluminum and plastic, makes this Carrier System extremely aerodynamic. compatible with wide range of saddles. PLEASE NOTE: This product is designed for professional cycling , compatible with full-suspension MTB,
  • 🚲 Black Matt Cage
  • 🚲 RIDE LIKE A PRO: Many professionals and Ironman competitors use our water cages, saddle cage holders and Aero Bags for training and races.
Rank No. #20
Bike Seat Water Bottle Holder Water Bottle Bike Mount Bike Clip Bottle Cage Adapter BLACK ANODIZED Handlebar Bottle Cage Mount Seat Post Water Bottle Cage Adjustable MTB Road Or Kid Bike Beach Cruiser
  • Ride Harder! Instead of worrying about your water bottle cage sliding down after you hit some big bumps or ten thousand miles, this unique vice-like clamp keeps your bike drink holder in place so you can ride harder and longer. Grab that bottle millions of times, because it won’t budge. Ever.
  • Adjust 90 Degrees! Your aluminum bicycle water bottle holder mount is a 90Deg Adjustable Adapter, so you can mount it horizontal or vertical; seat post, handle bar or cross bar! You can mount it without drilling holes and 2 Spacers let you customize your bike mount from 22.2 to 31.8 mm (7/8 to 1-1/4 inches).
  • Unique Square Drive: Are you still using a cross style connection that’s known to break? They’re old news. For a vice-like grip, and a design that has other cyclists living in your slipstream forever, you need the updated square drive! More surface area for a stronger connection and more hydrated ride!
  • Here’s another thing your cycling peers don’t have. The clamp on water bottle holder mount has an extra 2mm at the base! It seems tiny but the max thickness makes this water bottle bike mount true all terrain. And it’s available in ‘solid’ powder-coated and ‘regular’ anodized finish – Choose your look!
  • As soon as your bike accessories arrive, read your insert card and keep it for your Lifetime Warranty. Then, follow our easy guide to fix your bicycle bracket to your ride and head out on your next Active Adventure. And now, you’re ready to stay hydrated without the hassle.

Last update on 2021-05-12 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Saddle Bottle Cage Mount for our consumer to review. The reports above show ratings of the best overal, best cheap Saddle Bottle Cage Mount to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.