The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Roughneck Pallet Jack Manual of 2020 – Consumer Guide & Reviews

Rank No. #1
Pallet Jack/Truck Load Wheels Set with Axles and Entry Exit Roller (4 pcs) 2.75" x 3.75" with Bearings ID 20mm Poly Tread Red
  • Pallet Jack / Truck Load Wheels Replacement Poly on Steel Red Grade A with Entry Exit Rollers
Rank No. #2
DAZONE Manual Pallet Jack Handle Replacement Parts Pallet Truck Handle Assembly for All Series Pallet Trucks
  • Replacement for Hand Pallet Truck
  • Jack Accessories for Manual Pallet Jack
  • Handle for Manual Pallet Jack Parts
  • Accuracy Designed
  • Free Shipping from USA
Rank No. #3
Homeon Wheels Pallet Jack Stopper Truck Chock Heavy Duty Pallet Jack Chock 14.2" Length x 11.6" Width x 2" Height (1 Piece-Black)
  • Stop for holding pallet truck still in a moving truck or trailer.Handle for carrying
  • Just pull it into this Pallet Truck Stop and it's parked in less than 2 seconds
  • Special design at the bottom to increase friction on the ground and the chassis is supported by the stop
  • The wheel is hanged to prevent moving and one side of the slope design is easy to enter
  • Extreme light weight,High quality rubber for resistance to slipping, wear, and weather
Rank No. #4
Roughneck Air/Hydraulic Lift Table Cart - 770-Lb. Capacity
  • Lift or lower the scissor lift tabletop with the handy foot pedal control featuring a nonslip rubber cover
  • 35 5/8in.L x 20 1/8in.W platform
  • Extra-tough all-steel construction with durable powder-coat finish is easy to clean and easy to operate
  • Rolls on heavy-duty cast iron polyurethane casters; 2 swivel casters with brake and 2 fixed casters
  • 39 1/3in.L x 20 1/2in.W x 36in.H overall size
Rank No. #5
Roughneck Hydraulic Lift Table Cart - 2200-Lb. Capacity
  • Lift or lower the scissor lift tabletop with the handy foot pedal control featuring a nonslip rubber cover
  • 40in.L x 20 1/4in.W platform
  • Extra-tough all-steel construction with durable powder-coat finish is easy to clean and easy to operate
  • Rolls on heavy-duty cast iron polyurethane casters; 2 swivel casters with brake and 2 fixed casters
  • 53in.L x 24 3/4in.W x 39 3/8in.H overall size
Rank No. #6
CARBO GLIDE 6000 Heavy-Duty Pallet Jack 5500 lbs/Hand Pallet Truck 27x48
  • Long-Term Value: these products are built to last and easy to use in any part of your facility.
  • Foot Pedal in addition to the ergonomic handle and three-position lever, lower / raise / neutral
  • 210 Degree steering angle. and Changeable Wheels, your choice of Nylon for rough surface, PU for smooth surface.
  • Low profile forks at just 2.95" and lifting high up to 7.5"
  • 3 Year warranty on Pump, THIS ITEM SHIP ONLY TO COMMERCIAL ADDRESS THAT HAS FORKLIFT / DOCK.
SaleRank No. #7
Pake Handling Tools Manual Hand Pump Lift Truck- High Lift Pallet Jack - Heavy Duty Easy to Use Hydraulic Lift - 3300lbs Capacity for Skid/Single Sided Pallet
  • IDEAL FOR THE WORKPLACE: Use with single faced pallets, skids and bulk containers for best results. Fits in tight, narrow aisles.
  • STRONG AND SECURE: The heavy duty pallet forks can be raised 3.5 to 31.5” and the stabilizing support legs automatically extend when the load reaches 16.5”. When lowered, the lift automatically slows to protect heavier loads.
  • LESS WORK: This new hydraulic design helps you pump and release the manual lift with less effort. We want you to save your energy.
  • EASY STEERING: Good quality steel and 6” non-marking polyurethane steer wheels and 3” load rollers that won’t scuff up your warehouse floors and makes maneuvering easy!
  • EASILY STORABLE: Definitely not your average hand pump lift. Measuring at 44 x 27 x 4 inches, it gets the job done without taking up a lot of space.
SaleRank No. #8
Wesco 272175 Hard Rubber High Visibility Pallet Truck Chock, 11-3/4" Width x 2" Height x 14" Depth, Yellow
  • Chock for holding pallet truck still in a moving truck or trailer
  • Rubber for resistance to slipping, wear, and weather
  • Yellow for visibility
  • Handle for carrying
  • Measures 11.75" x 2" x 14"
Rank No. #9
Wesco Industrial Products 272975 Manual High Lift Telescoping Pallet Truck with Loop Handle, 3,300-lb. Load Capacity, 20" x 63" x 48.5"
  • Telescoping manual hydraulic pallet jack with 6.5" x 43" forks for lifting and transporting pallets
  • Hydraulic pump with hand control for 31.5" maximum lifting height
  • 3,300-lb. load capacity
  • 3" moldon polyurethane load wheels and 6" moldon polyurethane steering wheels for 180-degree steering arc
  • Measures 20" x 63" x 48.5" overall
Rank No. #10
Xilin Manual Pallet Jack High Lift Hand Pallet Truck 2200lbs Capacity 3.3" Lowered 45"Lx21“W 31.5 Lift Height JF-520
  • 31.5" raised height and 3.3" lowered
  • Three position hand control: Raise, Lower, Neutral
  • 2.9" single polyurethane fork wheels | 7.1" polyurethane steering wheels
  • Ergonomically designed handle
  • Reliable oil leak proof hydraulic system
Rank No. #11
Sandusky PT5027 Heavy-Duty Pallet Truck, 5,500 lb. Capacity
  • Pallet jack can be used to lift and transport pallets; made of steel, which is resistant to wear and corrosion
  • Handle allows user to jack up forks and maneuver pallet truck; trigger on handle releases and lowers the forks
  • Front rollers measure 3 inches in diameter and are made of nylon to support heavy loads and help prevent marks or scratches to floors
  • Rear wheels measure 7 inches in diameter, are made of nylon, and swivel for maneuverability
  • Has a load capacity of 5,500 lb.; weighs 198 lb.; measures 37 x 27 x 50 inches (H x W x D)
Rank No. #12
Wesco Industrial Products 272149 Economizer Pallet Truck with Handle, Polyurethane Wheels, 4400 lb. Load Capacity, 63" Length x 27" Width x 48-1/4" Height
  • Pallet truck for lifting and transporting pallets
  • Steel for resistance to wear and corrosion
  • Polyurethane wheels for resistance to impact and wear
  • 4,400 lb. load capacity with service range of 2.9" to 7.5" high
  • Measures 48-1/4" x 27" x 63" overall
Rank No. #13
APOLLOLIFT Heavy Duty Pallet Jack Truck 6600lbs Capacity DF-III-3
  • Ergonomically designed handle
  • 3 position hand control - Raise, Lower, Neutral
  • 2.95'' lowered and 7.5'' raised height
  • 6.3" polyurethane steering wheels, 2.8" single polyurethane fork wheels
  • Reliable oil leak-proof hydraulic system
SaleRank No. #14
Wesco Industrial Products 272740 Specialty Trans Roller Pallet Truck with Handle, Moldon Polyurethane Wheels, 5000 lb. Load Capacity, 63" Length x 27" Width x 48" Height
  • Pallet truck for lifting and transporting pallets
  • Adjustable load wheels for moving truck forward or sideways
  • Steel for resistance to wear and corrosion
  • 5,000 lb. load capacity with service range of 3.4" to 7" high in standard mode
  • Measures 48" x 27" x 63" overall
Rank No. #15
M25 Heavy Duty Pallet Jack 5500 lb Hand Pallet Truck 27 x 48"
  • 27" overall fork width (14.4" between forks) 48" long forks with adjustable height 2.95"-7.5"
  • 7"x2" articulated pallet jack wheels with 200 degree steering angle
  • Robotic welding technology provides pallet jack superior finish and overall structural durability
  • Ergonomic handle and three-position lever with raise, lower and neutral positions for pallet truck
  • Excellent warranty and service simplicity with easily replaceable and readily available pallet jack parts
Rank No. #17
Roughneck Slaters Hammer
  • Pointed pick at one end
  • Rectangular striking head
  • Lightweight
  • One piece construction
  • Non-slip rubber grip
Rank No. #18
Vestil PJ-CYL-4 Steel Cylinder Caddie for Pallet Truck
  • Pallet jack style transports cylinders safely
  • The caddy comes complete with safety chains
  • Chains are ideal to secure the cylinders in place
  • Optional caster kit allows for portability without the need of a fork or pallet truck
Rank No. #19
Pallet Truck, Load Capacity 5000 lb
  • Price For: Each Color: Blue Pallet Jack Style: Standard Overall Width: 27" Overall Height: 48" Fork Length: 48" Load Center: 24" Wheel Material: Polyurethane Roller Dia.: 2-7/8" Pivot: 190 Degrees Finish: Powder Coated Roller Material: Polyurethane Construction: Steel Item: Pallet Jack Bearings: Sealed Ball Lifting Height Min.: 2-7/8"
  • Lifting Height Max.: 7-1/2" Width Across Forks: 27" Fork Height Lowered: 2-15/16" Grease Fittings: 2 Internal and 9 Bushings Main Wheel Size: 7 Width Between Forks: 14-1/2" Fork Height Raised: 7-1/2" Fork Width: 6-1/4" Overall Length: 63" Load Capacity: 5000 lb. Handle: Cushion Grip Country of Origin (subject to change): China
Rank No. #20
Cool furniture Pallet Truck/Pallet Jack Rear Axle Replacement Kit (2PCS)
  • 100% brand new
  • Side panels and axles: 3 tons of side panels and axles are versatile and the axles are secured with spring pins. The set includes 2 side panels.
  • Maximum load capacity: 3T
  • 2 sets of rear axle replacement kits in the package
  • Suitable for rear wheel set replacement of pallet trucks

Last update on 2020-09-14 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Roughneck Pallet Jack Manual for our consumer to review. The reports above show ratings of the best overal, best cheap Roughneck Pallet Jack Manual to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.