The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Roof Vent Pipe Boot of 2020 – Consumer Guide & Reviews

Rank No. #1
IPS CORPORATION 81710 3-in-1 Roof Flashing
  • The roof flashing is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes
  • Constructed of a durable galvanized steel base to prevent rust and cracking
  • Features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather
  • Designed to direct water away from critical areas on the roof and prevent penetrations
  • Compatible with any roof pitch up to a 45-degree angle
Rank No. #2
Flashers #3 Black EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made In The USA
  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
SaleRank No. #3
Oatey 14049 Retro Master 0.25"-5.75" Pipe Diameter Roof Flashing 8" x 8" Base, Black
  • Retro master flashing slides over vent pipe for pitch to 45 degree.
  • Flexible base conforms to most flat or contoured roof surfaces including clay tile and metal roofs.
  • Approved for type b installations.
  • Continuous temperature resistance to 212 degree f. Intermittent temperature resistance to 275 degree f.
  • Size .25 - 4 in
Rank No. #4
Oatey 11919 ThermoPlastic Base Flashing, 1.5-Inch-3-Inch, Gray
  • Roofing Repair Supplies
  • Manufacturer: Oatey
  • Country of Origin: United States
  • Slides over pipe. Type of base determines pitch
  • Non-fading, non-cracking and non-rusting bases and sealing collars
Rank No. #5
The Ultimate Pipe Flashing (3" Boot)
  • Ultimate Pipe Flashing 300 (fits 3" Pipe)
Rank No. #6
Flashers #3 Grey EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 1/4" to 5") - 100% Made in The USA
  • MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
  • EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
  • Flashers’ flexible rubber won’t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
  • Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
  • Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
Rank No. #7
Oatey 14052 Retro Master 0.25"-5.75" Pipe Diameter Roof Flashing 8" x 8" Base, Black
  • Slides over pipe - for pitch to 45 degrees
  • Use silicone sealant between base and surface, and secure with sheet metal screws
  • Multi-size pipe sealing range
  • Molds to metal, plastic, etc
  • Non-fading EPDM collar
Rank No. #8
DEKTITE #1 (DF101G) Gray EPDM Flexible Round Pipe Flashing Dektite (fits OD Pipe Sizes 1/4" - 2-1/2") - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite
  • Flexible Base Conforms to Ridges in Metal Roofing. Customizable with heavy scissors or shears.
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures
  • EPDM Dektite Pipe Flashing Roofing Boot is Designed for Temperatures Between -58˚ to +239˚F
  • Metal Roofing Pipe Flashing Boot Fits Pipes Between 1/4" and 2-1/2" OD with a base size of 4-3/4"
  • Manufacturer's Warranty of 20 Years, Will not Break or Crack, Reducing building maintenance
Rank No. #9
Oatey 14053 2.75 in. – 7 in. Master x 10 in. Base Roof Flashing, Black
  • Approved for Type B installations.
  • Non-fading sealing collar.
  • Not for hot-mopped or built-up roofs.
  • Continuous Temperature Resistance to 212 Degree F. Intermittent Temperature Resistance to 275 Degree F.
  • Size 3 in 6 in
Rank No. #10
Dektite Retrofit #1 Gray EPDM Metal Roof Pipe Flashing, Round Base, Pipe OD 3/4" - 2-3/4"
  • Continuous Service Temperature Ranges of -58F to 239 F (EPDM)
  • Flashing Base Diameter is 6-1/3" - Pipe Boot Fits 3/4" to 2-3/4" Outside Pipe Diameter
  • Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
  • Where the Height of Pipe is Difficult to Reach or Existing Obstruction Blocks Top of Pipe;
  • Flashing Can Be Cut Along the Seam and Resealed With Provided Clips
Rank No. #11
Oatey 12933 Aluminum 2" Pipe Diameter 9" x 12.5" Base No-Calk Roof Flashing
  • Rustproof stamped aluminum base allows for easy shaping of flashing
  • Rated 180°F continuous heat and approved for Type B installations
  • Metal base for pitch from 0-40° or up to 10/12 roof
  • Self-sealing collar slides over pipe and requires no caulking
  • Collar will not fade
Rank No. #12
Oatey 14055 4.75 in. – 10 in. Master x 12 in. Base Roof Flashing, Black
  • Slides over pipe - for pitch to 45 degrees
  • Use silicone sealant between base and surface, and secure with sheet metal screws
  • Multi-size pipe sealing range
  • Molds to metal, plastic, etc
  • Non-fading EPDM collar
Rank No. #13
EAGLE 1 Lead Pipe Flashing Boot- Shingle Roof Plumbing Vent Pipe Flashing- Eligant and Stylish Finished Look for Your Home- Free Gloves with Your Order (1, 2 Inch)
  • Adjustable neck bends to fit your roof pitch up to 14 degrees. Fits up to 12/12 pitch.
  • Made from pure 2.5 pound lead. Welded bottom seam ensures a water tight seal keeping your home dry.
  • We include a free pair of work gloves with each order for your safety and protection.
  • Gives your home's roof an eligant finished look.
  • Don't see what you need? Give us a call or send us a message. We are sheet metal and roofing people! Put our 25 years of roofing experience to work for you.
Rank No. #14
Oatey Oatey-14206 14206 2" Rain Collar, For No-Calk Roof Flashings, Black, 2"
  • The product is manufactured in china
  • The product is highly durable and easy to use
  • Easy installation and easy handling
Rank No. #15
Perma Boot 312-4 BLK Repair Plumbing Vent Boot Repair System, 4-Inch Fits 4-Inch PVC Pipes, Black
  • Easy installation and no tools required
  • Slides over the existing roof vent boot
  • Prevents future leaks
  • Designed for all standard roof pitches (3/12 to 12/12)
Rank No. #16
Timberland PRO Men's Powertrain Sport Alloy Safety Toe Electrical Hazard Athletic Work Shoe, Black/Orange, 11 Wide
  • KEEP IT COMFORTABLE: Athletic styling gives these men’s Powertrain Sport work shoes a modern look. Alloy safety toes, breathable mesh linings, electrical hazard protection & anti-fatigue technology combine for ultimate low-profile comfort & protection.
  • SAFETY AND COMFORT: Built on a tradition of craftsmanship & innovation, Timberland PRO helps you conquer your work day. Technology like our proprietary outsole with built-in Anti-Fatigue Technology keeps you comfortable all day.
  • A SOURCE OF PRIDE: We know you take pride in your work, so our soft-toed shoes and boots and steel-toe boots and shoes are designed to provide you with enhanced job performance day in and day out. Wear them at work well as at home with comfort & style.
  • QUALITY WORKWEAR: Timberland PRO assesses the unmet needs of those who work in the most demanding environments and then develops solutions that deliver ultimate comfort, durability & protection—all day long—from work boots & shoes to anti-fatigue insoles.
  • Premium ripstop nylon upper with breathable and moisture-wicking lining with treatment for odor control
Rank No. #17
Dektite Premium #7 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6" to 12"
  • #7 RED Dektite SQUARE Base High Temp Flexible Roof Pipe Boot Flashing. Base is 18" x 18".
  • Red Silicone Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 6" to 12" Pipe OD.
  • Continuous Service Temperature Ranges of -58˚F to +392˚ F. On Site Customizable Pipe Boot.
  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack.
  • This DEKS DEKTITE SQUARE ROOF PIPE BOOT FLASHING: #7 Red SILICONE listing is for A 1 PACK
SaleRank No. #19
Skechers mens Holdredge - Rebem Work Boot, Black Leather/Charcoal Trim, 9 US
  • Memory foam
  • Steel toe rated ASTM F2412/2413-2011 I/75 C/75 protection
  • Lace up ankle height hiker style steel toe work boot design
Rank No. #20
Dektite Premium #8 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6-3/4" to 14"
  • #8 RED Dektite SQUARE Base High Temp Flexible Roof Pipe Boot Flashing. Base is 19-1/2" X 19-1/2".
  • Red Silicone Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 6-3/4" to 14" Pipe OD.
  • Continuous Service Temperature Ranges of -58˚F to +392˚ F On Site Customizable Pipe Boot.
  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack.
  • This DEKS DEKTITE SQUARE ROOF PIPE BOOT FLASHING: #8 Red SILICONE listing is for A 1 PACK

Last update on 2021-10-12 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Roof Vent Pipe Boot for our consumer to review. The reports above show ratings of the best overal, best cheap Roof Vent Pipe Boot to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.