The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Plastic Storm Drain Catch Basins of 2020 – Consumer Guide & Reviews

SaleRank No. #1
Storm Drain FSD-3017-G20B 20-in. Round Flat Green Grate for Catch Basin
  • Dimension: 22"l x 22"w x 2"h
  • Recommended for pedestrian, bicycles and wheel chair traffic.
  • Open Area: 102 Sq inches
  • Flow rate: 134 GPM
  • Made in the USA
Rank No. #2
Storm Drain 20" Round Catch Basin Drain Box With Solid Lid (1)
  • Easy to install
  • Accepts risers to bring to grade
  • Accepts 6", 4", 3" & 2" pipe
  • Pipe can be installed at various heights
Rank No. #4
StormDrain FSD-124-A Replacement 12-in. Square Catch Basin Atrium Grate, Black
  • Atrium design blocks large debris from entering your drainage system.
  • Made of durable polypropylene with UV inhibitors to eliminate sun damage
  • Replacement for 12" catch basin grates, fits both StormDrain and NDS brand catch basins.
  • Proudly Made in the USA! - Lifetime Warranty
SaleRank No. #5
NDS FWAS24 50 Gal. Flo Stormwater Dry Well System Kit with 3 Side Panels & 1 Cover, Black
  • Protect property from water damage by collecting, detaining, and infiltrating stormwater runoff. Flo-Well Dry Wells are ideal for both residential and commercial locations including yards, playgrounds, golf courses, and wash-down areas
  • Connect to 4 in. Sewer and Drain Pipe through top cover knockout; 12 side-panel knockout points connect to 4 in. Sewer and Drain and Schedule 40 Pipes; knockout points stay securely in place if not needed. Gravel-free interior provides 250% greater water holding capacity than comparable gravel-filled dry wells. The Flo-Well Dry Well can be buried or stacked up to 8 ft. deep and supports pedestrian traffic including lawn tractors
  • Can be installed alone; when using more than one, install additional Flo-Well Dry Wells side by side, 18 in. apart; units can also be stacked up to 4 high when able to dig deep without hitting bedrock. Special ribbed design on side panels adds structural strength for long-lasting durability; no need to pack gravel inside
  • Side panels, when assembled, form a 24 in. dia. X 24 in. tall cylinder; with addition of cover the overall height is 28-3/4 in. with 50 gallons storage capacity. Thirty 1 in. knockout weep holes provide additional infiltration capacity, simply punch out with a firm tap using a hammer and wrap Flo-Well Dry Well with filter fabric wrap (sold separately) to prevent soil intrusion
  • Comes with 3 side panels and top cover, unassembled. Hassle-free limited lifetime which s your NDS product is free from defects, or we'll replace it
Rank No. #6
StormDrain FSD-124X-RF 12-in. Flat Grate for Catch Basin, Black
  • Replacement for 12" Catch Basins | Dimensions: 12" x 12" x 1"
  • Durable polypropylene construction with UV inhibitors to eliminate sun damage.
  • Recommended for pedestrian, bicycles and wheel chair traffic, meets Class A Load Rating - Loads of 1-60 psi
  • Proudly Made in the USA! - Lifetime Warranty
Rank No. #7
Storm Drain FSD-124-SF Replacement 12" Square Catch Basin Flat Grate
  • Color: Black
  • Made of durable polypropylene with UV inhibitors to eliminate sun damage
  • Fits Both Storm Drain and NDS Brand Catch Basins
  • Made in the USA
  • Lifetime Warranty
Rank No. #8
NDS 1200BKIT Black Plastic Grate, 2 Adapters, and 1 Outlet Plug, 12 in, 12" x 12"
  • Collect stormwater runoff and standing water on your property and direct to drain pipes before it causes costly property damage. Manage heavy flows of water from lawns, landscaped areas, under downspouts, patios, and walkways
  • Connect to 3 in. & 4 in. Sewer and Drain, Single-Wall Corrugated & Triple-Wall Pipes & 4 in. Sch. 40 Pipe using included outlet adapters; additional outlet adapters sold separately for connections to 6 in. and 8 in. Pipes. 162 GPM flow rate for 12 in. square plastic grate . 12 in. square grate has an open surface area of 53.1 sq. in. . Rated for NDS Class B loads (up to 175 psi) when properly installed with grate—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph
  • Lightweight and easy to install. Four weephole knockouts on bottom to eliminate stagnant water
  • Keyed side openings lock outlet adapters in place; knockout on bottom for additional keyed opening if needed. Outlet adapters provide a secure, soil-tight fit to pipe—no tape or glue required; included plug fits inside outlet adapter and seals catch basin opening to direct flow of water
  • Kit includes 12 in. Catch Basin Drain with 2 side openings and knockout for bottom opening, 2 Outlet Adapters, 1 Plug, Plastic Drain Grate . Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it
SaleRank No. #9
NDS 1215 Square Catch Basin Drain Grate, 12 in, Galvanized Steel
  • Rust- and corrosion-resistant galvanized steel grate protects your drainage system by blocking leaves and debris before they can enter and clog your pipeline. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from driveways, parking lots, and landscaped areas
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in. Low-Profile Adapter. 348 GPM flow rate. 113.8 sq. in. of open surface area. Rated for NDS Class C (H-20) loads (up to 325 psi) when properly installed—recommended for heavy-duty pneumatic tire forklifts and tractor-trailers at speeds less than 20 mph
  • Easy to install; fits on 12 in. catch basins, risers, and low-profile adapters, and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it
SaleRank No. #10
NDS 1216 Bottom Catch Basin Riser, Black Low-Profile Adapter Drain, 12 in, 12 inches
  • Add up to 6 in. of height to a catch basin that sits deeper underground; enables catch basin to collect surface stormwater and direct to drain pipes before it causes costly property damage. Use with a 12 in. catch basin drain and 12 in. square catch basin grate to drain surface water from lawns, landscaped areas, under downspouts, patios, and walkways
  • Stack right on top of 12 in. Catch Basin storm drain, fit a 12 in. Catch Basin Drain Grate on top. Flow rate based on type of pipe connected to catch basin. Load rating based on type of grate installed
  • Lightweight and easy to install. Customize to size with a saw
  • Add up to 6 in. of height to top of catch basin. N/ADesigned to fit 12 in. catch basin below and 12 in. catch basin drain grate on top
  • Comes with one 6 in. Riser for 12 in. Square Catch Basin Drain & 12 in. Low-Profile Adapter Drain. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it
Rank No. #11
StormDrain 9-In. Square Catch Basin Kit with Debris Trap Green Grate
  • Quickly collects and removes unwanted storm water from lawns, patios & other areas around the house
  • Fits 3" & 4" sewer & drain pipe and fittings, corrugated pipe & Sch 40 PVC
  • Sump area collects debris to help prevent clogged pipes. Capacity: 2.4 U.S. Gallons
  • Preferred by homeowners, landscape architects, designers and contractors
  • Outlet: 2 outlets with 3 additional knockouts available. Made in the USA
SaleRank No. #12
Wholesale Plumbing Supply 12-in. No Dig Low Profile Catch Basin Downspout Extension Kit, Black
  • No digging required, low profile design can be hidden by covering with mulch, straw or other landscape cover
  • Includes 8 ft. L of 2 in. flexible pipe to prevents water and foundation damage by diverting rain water around landscaping
  • Made with a durable resin that can withstand all outdoor elements
  • Compatible with all standard residential downspouts (2 in. x 3 in., 3 in. x 4 in., and round)
  • Basin is 12-in D x 4.25-in. W x 12-in. W. Includes 2-drain pipe knockouts and a cap to close off 1-hole if only using 1-drain location
SaleRank No. #14
NDS 50 6" Round Grate, Green Fits Spee-D Catch Basin 6 in. Drain Pipes & Fittings, 6"
  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways
  • Fits Spee-D Catch Basin Drain, 6 in. Sewer and Drain Pipe & Fittings, 6 in. Single-Wall Corrugated Pipe. 28 GPM flow rate. 9.1 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic; ADA compliant and heel-proof
  • Place on top of drain pipe, drain fitting, or Spee-D Basin for a soil-tight fit. 6 in. Round Drain Grates are available in a variety of colors and materials
  • Grate is 2-3/8 in. high; top is 6-3/4 in. in diameter; grate openings are 1/4 in. wide
  • Comes with one 6 in. Round Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it
SaleRank No. #16
NDS 1200FFRTL Square Catch Basin Drain Filter, 12 in, Gray
  • Prevents more dirt and debris from entering and clogging your drainage system than using a drain grate alone. Helps keep your drainage and infiltration systems clog-free and running smoothly
  • Fits within the 12 in. Square Catch Basin grate seat, place the 12 in. Catch Basin Drain Grate above
  • Preassembled and easy to install—just remove the grate, place the filter within the basin grate seat, and reinstall the grate. Unique bypass feature allows water to flow through the system even when the filter is full
  • Removable and easy-to-clean
  • Comes with one 12 in. Square Catch Basin Drain Filter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it
Rank No. #18
Storm Drain 12-Inch Square Catch Basin Kit With Grate and 2 Connectors Gxfc
  • 12-inch Square Catch Basin Kit + FREE DEBRIS FILTER
  • Quickly collects and removes unwanted storm water from lawns, patios & other areas around the house.
  • Catch basin kit includes double outlet catch basin, grate, 2 universal adapters and 1 plug
  • Commercial grade polypropylene, designed for maximum durability & drainage | Dimensions: 12.125" x 12.125" x 12.875"
  • Proudly Made in the USA!
SaleRank No. #19
FSD-3009 6-in. Riser for Storm Drain 20-in. Drain Box Catch Basin
  • Hold their shape and are stackable
  • Structural ribs inside prevent frost from adhering to the riser in the frost prone areas
  • Screw together assembly; Water and air tight
  • Lid, grate and basin sold separately
  • Made in the USA
Rank No. #20
Storm Drain FSD-064-A 6-in. Round Plastic Atrium Grate - Black
  • Dimensions: 6.75"l x 6.75"w x 5"h
  • Color: Black - Part No. FSD-064-A
  • Durable polypropylene construction
  • UV inhibitors to eliminate sun damage
  • Lifetime Warranty

Last update on 2021-06-04 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Plastic Storm Drain Catch Basins for our consumer to review. The reports above show ratings of the best overal, best cheap Plastic Storm Drain Catch Basins to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.