The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Pci Fan Controller of 2020 – Consumer Guide & Reviews

Rank No. #1
icepc PC 8 Channels Fan Hub 4 Knob Cooling Fan Speed Controller for CPU Case HDD Vga Pwm Fan Pci Bracket Power by 12V Fan Con(sata Interface)
  • Mini size, suitable for more types of computer chassis
  • Made of high-quality material, durable, firm and stable
  • This cooling fan hub is equipped with the independent speed controller
  • Professional high speed regulating circuit, high performance, support for SATA interface
  • Cooling Fan Speed Controller only, other accessories demo in the picture is not included
Rank No. #2
6 Way 3-Pin 4pin PCI Cooling Fan Speed Controller PC Case Fans Temperature Control - SATA Power Supply
  • Increase speed to reduce computer part temperature when computer parts are busy.
  • Reduce speed to reduce noise & power consumption when computer parts are free.
  • The fan can be connected to 6 way 3PIN/4pin interfaces for speed adjustment.
  • The governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space.
  • PCI bracket available to install fan speed controller.Adjustable knob available to adjust cooling fan revolution speed.
Rank No. #3
Lamptron RGB/ARGB Fan and Light PCI Controller
  • Fan and RGB controller
  • Includes a 7.84 inch full color LCD display and remote control
  • 6 way fan port for PWM fans
  • 6 × ARGB (5vdg) interface
Rank No. #5
6 Ports PC Computer Case Chassis Fan Hub Speed Controller SATA Power Supply, Mini 3 Pin 4 Pin Fan Interface - DC 12V
  • Reduce speed to reduce noise & power consumption when computer parts are free.
  • Increase speed to reduce computer part temperature when computer parts are busy.
  • The fan can be connected to 6 way 3PIN/4pin interfaces for speed adjustment.
  • The governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space.
  • PCI bracket available to install fan speed controller.Adjustable knob available to adjust cooling fan revolution speed.
Rank No. #6
Lamptron PCI RGB & Fan Controller
  • Fan and RGB PCI controller with separate display
  • Four headers for up to 60 RGB LEDs (12VGRB)
  • Four headers for up to 60 digitally addressing RGB LEDs (5VDG)
  • Includes remote control
Rank No. #7
Fltaheroo PC 8 Channels Fan Hub 4 Knob Cooling Fan Speed Controller for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control Power Supply
  • Made of high-quality material, durable, firm and stable for us to use.
  • Professional high speed regulating circuit, high performance, support for SATA/4Pin interface.
  • This cooling fan hub is equipped with the independent speed controller for you to adjust.
  • To replace the old, broken or damaged one with this new one.
  • Cooling Fan Speed Controller only, other accessories demo in the picture is not included!
Rank No. #8
Tiamu Pc 8 Channels Fan Hub 4 Knob Cooling Fan Speed Controller for CPU Case HDD Vga Pwm Fan Pci Bracket Power by 12V Fan Control
  • Type:PCI Cables
  • Product Name:4-position knob fan speed controller
  • Package:Yes
  • Products Status:Stock
  • Power supply interface:Molex/Sata
Rank No. #9
Shentesel PCI 8 Way Desktop Computer Cooling Fan Speed Controller SATA/4Pin Power Socket - 4Pin
  • The fan governor is suitable for various 3pin fan speed adjustments, such as CPU fan, chassis fan, graphics card fan, south bridge fan, north bridge fan, hard disk fan, server fan, inverter fan, etc
  • The fan speed controller adjusts the up/down fan speed with the knob. An easy way to adjust the fan speed and cooling effect of the cabinet.
  • Supports 8-channel fan speed adjustment at the same time. The fan can be turned off and the speed adjustment range is 0%-100% full speed.
  • Adjustable knob adjusts the cooling fan speed of all connected fans simultaneously Only voltage adjustable control is required, only compatible with 3pin fans. Design for narrow PC chassis installation.
  • Features: PCI 8 Channel, Cooler Speed Control, Easy to Use. Size: 80mm x 45mm x 15mm/3.15" x 1.77" x 0.59" (Approx.)
Rank No. #14
IO Crest 4 Serial Ports PCI-e Controller Card with Fan-Out Cable and Bundled with Low Profile Bracket SI-PEX15038
  • Fully Compliant with PCI Express Base Specification, Revision 1.0a
  • PCIe Multi Function Peripheral Controller with x1 lane Interface
  • Support for D1, D2, D3 Hot and D3 Cold
  • Utilizes 100-MHz Differential PCI Express Common Reference Clock
  • Support PCIe Power Management.Four 16c450/550/Extended 550 Compatible UARTs.Supports RS232 Modes. Form Factor: Low Profile.Bi-directional Speeds from 50 bps to 16 Mbps/Port
SaleRank No. #15
Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller
  • Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
  • In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
  • For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
  • There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
  • RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
Rank No. #16
Zalman Fan Speed Controller FANMATE-2
  • Output Voltage: 5V ~ 11V +/- 2%
  • Allowable Wattage: 6W or Lower
  • Connector: 3 Pin
  • Package: RETAIL
Rank No. #17
EKDJKK 12V Chassis Fan Hub CPU Cooling, Cooling Fan Hub, Computer CPU Cooling Fans, Adapter Chassis Fan and CPU Fan Hub PC Fan Controller, 3 Pin 4 Pin to 8 Pin CPU Power Adapter
  • 【3Pin/4Pin Fan Hub】If your motherboard lacks fan interfaces, fan hub is the neat and tidy way to expand. Support 3Pin/4Pin dual-type standard fan port.Types: 1(3 Way With Cable), 2(3 Way With Black Cable), 3(8 Way 1 Knob 4D), 4(8 Way 1 Knob SATA), 5(8 Way 4 Knob 4D), 6(8 Way 4 Knob SATA)
  • 【Knob Adjust】High accuracy and good performance, equipped with an independent speed controller and the speed can be adjusted at will.Adjustment Method: 1 Manual Adjustment Knob.Power Supply Interface: 4D
  • 【Multiple Type】3/8-fan stepless variable speed upgrade, 1/4-Knobs control speed regulation, power supply interface supports 4D/SATA, 6 types for your choice.Installation Position: PCI Position of PC Chassis
  • 【Universal】Widely used for PC computer water cooling system, easy to install.Fan Interface: 4PIN (3PIN Can be connected).Power Supply Interface: 4D/SATA
  • 【Material】This Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat.3 Way Cable Length: About 45cm/17.7inch
Rank No. #18
DS Rainbow RGB Fan LED Sync Controller only for DS Fans (with 21key RF Remote, SATA Power Cable, 4th Gen, A D E Series)
  • For Only Use with Addressable LED Fans and LED Strip for DS A/D/E Series Fans
  • 21 Key RF Remote, Multiple Modes, Can Adjust Fan Speed
  • Fan connector of 6 Pin , LED strip connector of 4 Pin, for DS Fans
  • DS Hub Box Can Sync Up Color to 9 x Fans and 2 x LED Strip Light
  • Risk-free purchase experience: If you have any questions, please contact us, DS LEDdess will reply within 24 hours
Rank No. #19
ZRM&E PC Fan Speed Controller 8 Way Cooling Fan Hub 3 Gear Speed IDE Molex 1 to 8 Multi Way Splitter 3-Pin Power Socket PCB Adapter
  • Type: Large 4 Pin IDE Molex 1 to 8 Way Cooling Fan Splitter Hub
  • 3 Level Speed Controller: Low Speed, High Speed, and Power OFF.
  • Input: Large 4 Pin IDE power supply interface port, connect to your PC computer.
  • Output: 8 way fan interface ports, fits for 12V 3pin / 4pin cooling fan, can be used as speed controller or fan splitter hub.
  • Installation: With thickened 3M glue on the PCB back, you can fix it on your PC case firmly.
Rank No. #20
Noctua NA-FC1, 4-Pin PWM Fan Controller (Black)
  • Compact, highly flexible controller for 4-pin PWM fans
  • Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series
  • “No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors
  • Includes a 3-way splitter cable for controlling up to 3 fans simultaneously
  • 6-year manufacturer’s warranty

Last update on 2021-06-23 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Pci Fan Controller for our consumer to review. The reports above show ratings of the best overal, best cheap Pci Fan Controller to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.