The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Panel Clamps Woodworking of 2020 – Consumer Guide & Reviews

Rank No. #1
2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers (2 four way pressure clamps)
  • Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
  • Let’s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
  • Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
  • Now you can confidently glue up wide boards, shelving, table tops, and more up to 6” thick. To setup the clamps simply attach the clamp to any length 2 x 2’s (2” x 4” ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12” to 18” for best results.
  • This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12” in length. Wood is required for setting up the clamp. Wood is NOT included.
Rank No. #2
Panel Max Glue Press Four Way 43 Inch Long Clamping System For Small and Large Panels. Keep Valuable Floor and Workbench Space Open While Gluing Up 39 Inch Maximum Width Flat Panels
  • Tired of buckled panels, messy gluing tables, heavy pipe clamps or loss of valuable floor or workbench space? Yeah, we were too! The Panel Max Glue Press System not only eliminates each of these issues, it is also user friendly and can be expanded to accommodate most any size panel you need to glue up! It does all this while producing well laminated boards or flat panels each and every time you use it. Much better than traditional clamps like pipe clamps, f-clamps or bar clamps!
  • The Panel Max Glue Press System applies even press on both ends and both sides of your panel project which helps create high quality joints and eliminates buckled or warped panels. This alone is reason enough to include this system in your workshop collection of “go to” tools. Of course, that’s not all. The Panel Max has linking arms or more accurately a top and bottom pressure assembly that adjust to any thickness of stock from 0” up to 5”.
  • The length you can clamp is only limited by the length of your wall where the Panel Max is mounted, the number of mounting rails that are installed (where the vertical assemblies are hung from) and the amount of vertical press assemblies you have. Each mounting rail is approx. 39-3/8” in length and my be cut to the desired size if necessary.
  • The Panel Max can clamp panel widths up to 41” using ¾” stock. With the max thickness stock of 5” you can clamp panel widths up to 39”. You can actually clamp a single large panel, or you can clamp multiple, more narrow panels all at one time up to the capacity of the clamp. To do this, clamp a couple of smaller panels edge to edge and leave out the glue between the first panel outer edge and the next starting edge of the adjacent panel to be glued.
  • The Panel Max Glue Press includes 1 each 39” mounting rail and 3 each 43” vertical clamp assemblies. We recommend using one vertical clamp 12” apart on center. Keep this in mind when deciding what you need to get for your most commonly built projects. The Package also includes full instructions to get you started and on your way to gluing up panels and boards with much less effort and aggravation than ever before!
Rank No. #3
Bora 50" Parallel Clamp Set, 2 Pack of Woodworking Clamps with Rock-Solid, Even Pressure, 571150T
  • Strong and steady – the 3. 5-Inch wide padded jaw provides constant, even pressure without damaging material and the jaw stays in place when winding the Clamp
  • Perfect pressure - not too loose, not too tight, just right with 1, 100lbs (500kg) of clamping pressure
  • Multiple sizes - The Bora parallel jaw Clamp is right for any project, available in lengths: 12”, 24”, 31”, 40” and 50”
  • Trusted Bora Quality - Bora knows how important rock-solid clamping is to woodworkers and designed this product based on end-user Feedback
  • Includes set of two 50-inch parallel Clamps
Rank No. #4
DCT 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set – For Stock up to 6 Inches
  • LARGE PANEL GLUE-UPS: The DCT 4-Way Pressure Release Clamp – Wood Panel Corner Clamping System Woodworking Bracket Set handles stock up to 6 inches (15.2cm) thick for simplifying the process of gluing table tops, countertops, furniture panels, cabinet doors, and more and saves you from using additional clamps to keep the glue-ups straight
  • 4-WAY: Stock stays flat and prevents buckling of boards during glue-up because of the equally applied pressure from all four directions (top, bottom, and both sides); Ideal for gluing table tops, shelving, veneer, laminates; Durable clamp only limited by the quality of prep and glue used
  • EASY TO USE: Assembly instructions included; More convenient than lining up standard clamps and cauls; Attach notched bars to any length 1.5-inch x 1.75-inch (3.2cm x 4.4cm) board (equivalent to a 2x4 ripped in half) with provided screws, set clamp and turn handle to tighten (on large pieces, we recommend one clamp every 18 inches/45.7cm for maximum clamping efficiency); Make sure the 2x4s you use are not twisted; Drill pilot holes for the outer-most screws when attaching the pressure pads
  • ADJUSTS TO YOUR PROJECT: Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to handle a variety of stock widths; Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches; Turn the handle to tighten the clamp and unwind the turn handle to release pressure; Clamp has pressure pads to prevent damage to the edge of your stock
  • CONTENTS: Package includes (2) 12.75-inch long notch bars, (2) 6.9-inch long notch bars, (1) clamp assembly head, (1) clamp assembly tail, (16) assembly screws (4x 3/8-inch, 12x 1-1/4-inch L), and assembly instructions; 1 set with 1 clamp (multiples needed for projects over approximately 2 feet/61cm); Wood required, not included
Rank No. #5
Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, red
  • H-Shaped Foot Assembly Stabilizes The Clamp In Two Dimensions Giving Dual-Axis Stability
  • Extra High Base Provides Industry Leading Clearance From The Work Surface
  • Cast Jaw For Durability
  • 2 soft jaw caps are included to prevent damaging materials being clamped
  • Zinc plated clutch components, black oxide coated threaded spindle
Rank No. #6
ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
Rank No. #7
DCT Wood Clamps, 1.5in Pinch Clamp Pinch Dog 10-Piece Set for Woodworking Wood Glue Up Gluing Table Panel Pinch Dogs
  • PINCH DOGS FOR WOOD WORKING: Use the DCT Pinch Dogs Woodworking Clamp Set to tightly join glue up panels; 1.5-inch (3.8cm) sizing permanently laser-etched on both sides of pinch clamps for easy identification
  • IDEAL FOR GLUE-UPS: For gluing up woodworking projects that are hard to otherwise clamp; These small clamps work on large biscuit panels and anything with an odd shape, angle, or curve such as round and oval table and countertops; Use for assembly clamping, column assembly, and pulling together a joint
  • EASY TO USE: Designed to tightly pinch together 2 boards while the applied glue dries (square corners over legs); Simply tap the tips of an ear clamp into the end grain on your project with a hammer and tap them out with a hammer when finished; We recommend keeping the points of the pinch dog clamps for woodworking fairly sharp to avoid splitting wood
  • DURABLE MINI CLAMPS: Constructed from steel for maximum strength and longevity so you do not have to worry about them easily twisting, bending, or breaking; These staple-shaped miter clip pinch dogs have a square back for easy and straight driving and tapered legs
  • PERFECT SIZE FOR YOUR NEEDS: Package includes (10) 1.5-inch pinch clamps woodworking dogs for your convenience; Wood and wood glue not included
Rank No. #8
One (1) Pair BESSEY 48" Heavy-Duty IBeam Bar Clamps for Woodworking
  • One (1) pair of IBEAM48 clamps that provide 48" of clamping width.
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth; 1-3/4" jaw width; 1-3/8" bar width; and 7/16" bar thickness.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting.
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure.
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied.
Rank No. #9
Jorgensen 6" Spreader/Bar Clamp Set, 4-pack,One-Hand Light Duty E-Z Hold Clamp/Spreader, 99216A
  • BASIC PARAMETER - Throat Depth : 2-3/8” from bar top of pad; Maximum opening capacity: 6”; Normal load limit: 150 lbs. Bar: 1/8”*1/2” plated, round-edge, high-carbon steel; Advancing handle: glass-filled nylon
  • Light-duty E-Z hold design - the E-Z hold design allows clamp to be used in two ways - clamp or spreader. Not only can these versatile Clamps can be easily converted into a spreader Clamps, feature our exclusive patented feature that allow two clamps to be joined together to make a clamp with more than double the opening capacity of a single Clamp
  • One-handed Clamp - as a standard, quick-acting Clamp, the patented and innovative sliding head maintains substantially higher clamping forces up to 300 lbs. The unique in-line advancing handle provides Comfort and ease of the use, permits greater travel per squeeze
  • Features - these bar clamps combine the speed and ease of single-handed use. With 2-3/8 inch reach and furnished with soft and durable plastic pads
  • Applications occasion - suitable for a wide range of woodworking & DIY projects
Rank No. #10
Sjobergs SJO-33274 Woodworking Portable Smart Vice with Superior Clamping Power Wherever You Need It
  • EXCEPTIONAL CLAMPING WIDTH – The Smart Vice jaws measure 4 ½” wide when open, ensuring the big jobs can be held fast
  • HEAVY DUTY SUPPORT – 1” Thick MDF top, with the vice measuring 14 ¼” in length. Overall measurement is 14 ¼ x 14 ¼.
  • EXTREMELY VERSATILE – Four ¾” round bench dogs make for optimal clamping options.
  • THREE MOUNTING OPTIONS – Choose from dowels, screws, or clamps, making it perfect for any application. Bring it wherever you need it – workbench, sawhorses, picnic table, etc.
  • LEGENDARY SJOBERGS QUALITY – Sjobergs has been making workbenches and accessories for more than 90 years, and have stood the test of time.
Rank No. #11
Jorgensen Cabinet Master 24-inch 90° Parallel Jaw Bar Clamp, 2-Pack
  • TIPS: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel.
  • Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp.
  • Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle.
  • Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading.
  • This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure.
Rank No. #12
POWERTEC 71368 Woodworking Parallel Clamps 24-Inch | Jaw Bar Clamp Spreader Tool | 2PK
  • Includes: (two) piece 24-inch parallel jaw Clamp set
  • Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 880lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier
  • Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool
  • 90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement
  • Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool
Rank No. #13
WORKPRO 8-Piece Metal Spring Clamps Nickel-plated Steel Heavy Duty Clamp Set 6-5/16 Inch for Woodworking Gripping Camping Photo Studios 2" Jaw Opening
  • 【Heavy Duty】There are 4 circles of thickening spring which provides stronger clamping force
  • 【Material】These spring clamps are made of nickel-plated steel which ensures the durability and rust prevention. The rubber sleeve at the tip can protect the surface of the workpiece
  • 【Ergonomic Design】The radian of the handle improves the comfort of use. The plastic sleeve here is for antiskid
  • 【Application】Perfect for woodworking, home improvement or industrial production. It is applicable for wood, metal and fabric
  • 【Security】All material of the spring clamps are in accord with California 65 Proposal, that will ensure the security to anyone who use them
SaleRank No. #14
Bora 100" NGX Clamp Edge | Straight Cut Guide For Circular Saws | 50" Clamp Edge & 50" Extension For 100" Cutting Length | 544100
  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Use with circular saws, routers, Jig saws, and other portable power tools
  • Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors
Rank No. #15
ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)
  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
SaleRank No. #16
3" Metal Face Clamp Woodworking - (Pack of 2) Heavy Duty C-Type Wood Clamps Clamping Tools with Ergonomic Grip for DIY, Pocket Hole Joinery, Cabinetry, Welding, Carpentry
  • A PERFECT ADDITION TO YOUR WOODWORKING SHOP: 3 in. jaw capacity (76mm) The Sandor 3" Face Clamps are able to handle work pieces up to 2-3/4 in. thick and a variety of materials. Perfect to do the job! Ideal for; DIY repairs, cabinetry, pocket-screw joinery and woodworking. Compatible for use with the Kreg R3 Jr Pocket Hole Jig System
  • GET MORE DONE. LARGE METAL SURFACE HOLDS WORK SECURELY: With its large metal faceplate the SANDOR Metal Face Clamps swivel pads surface adjust to hold your materials securely and distribute pressure evenly to ensure there is no marring of your work surface. Padded ergonomic grip allows you to grip and use the clamps comfortably with ease
  • PRACTICAL & MULTIFUNCTIONAL: These 3" Metal Face Clamps make your woodworking projects easy. Easily hold your work in place by clamping to a bench and hold while, carving, gluing or sanding. Help keep joints flushed on face frames, keeps jig in place and holds material down during sawing, welding or drilling. It's like having an extra set of hands in the shop
  • SETTING A NEW STANDARD. LEGENDARY QUALITY: The Sandor 3" Metal Face Clamps are made from extremely high-grade heat-treated steel for durability and ruggedness. No toolbox or workshop should go without a set because these tools are ideal for all your pocket-hole joinery, woodworking, carpentry and welding jobs
  • TRUSTED BRAND! WE STAND BY OUR PRODUCTS: When others talk quality, we deliver it. That's why we always offer a 100% Satisfaction Guarantee. At SANDOR Tool we only use the highest quality materials in our products, and we go the extra mile to stand by our tools. Your satisfaction is our priority. It's that simple!
Rank No. #17
Bessey KT5-1CP single spindle edge clamp for use with clamp rails up to 1/2"
  • For use with Bessey; Tradesmen clamps and other bar clamps, this edge clamp can be mounted anywhere on the bar to provide added clamping power. Bar sold separately.
  • Easy to use easy to install and highly durable
  • Wood handle
  • High strength roll formed threaded spindle threads
  • Locking knob for attachment to bar clamp rail included
Rank No. #18
ETIGER Right Angle Clip for Carpenter Clamping Tool Positioning Panel 90 Degree in Woodworking
  • Made of Made of aluminium alloy, it is durable and practical.
  • Right Angle Clip, Aluminium Alloy 90 Degree Positioning Squares - Aluminum Alloy Body with surface treat/ment is sturdy, durable And corrosion resistant. Perfect for wood/ right angle of metal/ 90 degree welding etc. Aluminum Alloy L Angle Clip 90⁰ Right Angle Welding Woodworking Metal Tool, Right Angle Clamps Woodworking Carpenter Tool Corner Clamping Square for Picture Frame Box Cabinets Drawers.
  • How to Use - Place a square in the corner of the two stock pieces you need to square and secure with a set of clamps
  • High Quality Material - Made of aluminium alloy. Durable, will lasts for years. Anodized red surface, durable and resistant to corrosion, rust prevention.
  • Multiusages L-Type Corner Clamp, Woodworking Carpenter Clamping Tool】Carpentry right angle jig professional use to assemble and DIY by claping boxes/ drawers/ shelf cabinets/ frames/ door making/ furniture cabinets etc. Some woodworkers even find it useful to incorporate them into their jigs and fixtures.Not only you can do glue-up jobs,but also can handle with complicated wine rack jobs and assist with squirting during glue up.
Rank No. #19
One (1) Pair BESSEY 60" Heavy-Duty IBeam Bar Clamps for Woodworking
  • One (1) pair of IBEAM60 clamps that provide 60" of clamping width.
  • All lengths of Bessey IBeam clamps provide up to 7000 lbs. of clamping force and include the following standard specifications: 2" throat depth; 1-3/4" jaw width; 1-3/8" bar width; and 7/16" bar thickness.
  • Steel, nickel-plated IBeam design provides exceptional strength over large distances without bending or twisting.
  • Cast iron sliding clamp jaw contains 5 clutch plates that allow it to move smoothly along the rail, while still holding its position under pressure.
  • Fixed end jaw has a 3/4" acme-threaded screw and large, easy-to-grip handle for quickly setting the clamp jaws while providing control over the pressure being applied.
Rank No. #20
E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool
  • Package Included: 4 pcs E-TING GH-201B horizontal quick release toggle clamp
  • Size: approx. 145*35*40mm/ 5.7" x 1.38" x 1.57" (L*W*H). Holding capacity force: 198 lbs.
  • Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips
  • Design: Low height design. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases

Last update on 2020-10-20 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Panel Clamps Woodworking for our consumer to review. The reports above show ratings of the best overal, best cheap Panel Clamps Woodworking to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.