The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Osoyoo Arduino Driver of 2020 – Consumer Guide & Reviews

Rank No. #1
OSOYOO Model-X Motor Driver Module Shield Expansion Development Board for Arduino DIY Smart Car Robot Mega
  • High operating voltage, which can be up to 40 volts
  • Large output current, the instantaneous peak current can be up to 3A, with 25W rated power
  • Two built in H-bridge, high voltage, large current, full bridge driver, which can be used to drive DC motors, stepper motors, relay coils and other inductive loads
  • Able to drive a two-phase stepper motor or four-phase stepper motor, and two-phase DC motors.
  • The module can utilize the built-in stabilivolt tube 78M05 to obtain 5v from the power supply. But to protect the chip of the 78M05 from damage, when the drive voltage is greater than 12v, an external 5v logic supply should be used
SaleRank No. #2
OSOYOO 4WD L298N Motor Driver Board Dual H Bridge DC JST Connectors for Robotic Smart Car for Arduino and Rapsberry Pi
  • OSOYOO Model-Pi L298N board is perfect motor driver board for Raspberry Pi portable applications such as robots, RC cars , drones , mini weather station etc.
  • This board supports all the features of L298N DC motor driver, in addition, it also has a USB 5V output port which can provide stable voltage to Raspberry Pi board without AC power input.
  • I/O pins fully compatible with L298N including EnableA/IN1/IN2/IN3/IN4/EnableB . It also has two channels of PWM output. Each channel supports two sockets which can power two DC motors.
  • Input power source can be 7.5v-24v batteries (we suggest using 2pcs tandem 18650 batteries etc, or 6pcs AAA Tandem AAA batteries, or , 2pcs Parallel 9V batteries for robot project). USB port gives stable 5V/2.4A output.
Rank No. #3
OSOYOO Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header Replace with ATmega328 Pro Mini for Arduino
  • ATMega 32U4 running at 5V/16MHz
  • Supported under IDE v1.0.1
  • On-Board micro-USB connector for programming
  • 4 x 10-bit ADC pins
  • 12 x Digital I/Os
Rank No. #4
LAFVIN Smart Robot Car Kit Include Ultrasonic Sensor, Bluetooth Module,R3 Board Compatible with Arduino IDE with Tutorial
  • The tutorial include codes,labraries and lessons.It will teach every users how to assembly the smart robot car kit and use R3 controller board, sensors and modules.
  • LAFVIN robotic car learning kit is designed for beginners to learn Arduino programming and get hands-on experience on robot design and assembly
  • This kit includes R3 Board HC-SR04 Ultrasonic Sensor,V5.0 extension board,Line tracking module,Bluetooth module,etc.
  • You will learn the Line Tracking, Ultraviolet Obstacle Avoidance, IR Remote Control, Bluetooth Remote Control of Smart Car, you can also extend other functions on this robot platform.
  • This car really excellent and safe to be a perfect gift for your children and friend.
SaleRank No. #5
kuman Complete Starter Kit with Detailed Tutorial and Reliable Components for Arduino Project Mega 2560 Robot breadboard Kits
  • This is an upgraded Super Starter Kit with free PDF tutorial(23 lessons), developed specially for those beginners who are interested in.
  • The kit has 44pcs components With tutorial in a CD including project introduction and source code, add More modules: LED Thermistor Touch sensor module than old version.
  • 1602 LCD display with pin header (need to be soldered by yourself)HC-SR04 Ultrasonic 5V Relay Power Supply Module Servo Motor with DC Prototype Expansion Board are included.
  • A complete set of most common and useful electronic components for clear listing in a nice Plastic package.
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE, contact us BY Email to get documents.
Rank No. #6
OSOYOO RC Two Wheel Self Balancing Robot Car Kit DIY Educational Programmable Starter Kit for Arduino Board, Bluetooth Remote Control by Android Smart Phone
  • 1. Designed based on OSOYOO Basic Board for Arduino, the self-balancing robot car kit is a fun and educational Arduino learning kit.
  • 2. High-precision motor with hall encoder, make it more superior, more powerful, safer.
  • 3. A perfect choice of master knowledge of PID (Proportion Integral Differential ) for beginner, children, students and so on.
  • 4. Controller - OSOYOO Basic Board for Arduino; 3-axis Accelerometer Gyroscope Sensor - MPU6050; Motor Driver - TB6612
Rank No. #7
RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO.
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm/0.32".
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi Board).
  • CAD 3D (pdf): https://m.media-amazon.com/images/I/B1Is+sAHViS.pdf
Rank No. #8
ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
  • The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
  • Lcd1602 module with pin header (not need to be soldered by yourself)
  • This is the upgraded starter kits with power supply module, 9V battery with dc
  • High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.
Rank No. #9
ELEGOO Mega 2560 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL Compatible with Arduino IDE
  • The MEGA2560 complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
  • Free pdf tutorial in the cd (more than 35 lessons)
  • Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
  • Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
  • We have always cared about the customer experience and improve the product function details
SaleRank No. #10
ELEGOO Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
  • The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
  • Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Rank No. #11
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico
  • UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
  • Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
  • Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
  • Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
  • No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package
Rank No. #12
ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects, RoHS Compliant
  • NEW IMPROVEMENT: Clear prints on the female header connector, more precise and easier to use the wire.
  • The ELEGOO UNO R3 BOARD now uses an ATMega16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
  • Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3)
  • 100% compatible with the Arduino IDE and RoHS Compliant
  • We have always cared about the customer experience and improve the product function details.
Rank No. #13
BOJACK 10 Values 50 Pcs IRFZ44N IRF510N IRF520N IRF530N IRF540N IRF640N IRF740 IRF840 IRF3205 IRF9540 IRF Series transistors MOSFET Assortment Kit
  • BOJACK 10 Values MOSFET transistors Assortment Kit
  • Product Name: MOSFET transistors
  • Model: 10 Type: N-channel-( IRFZ44N IRF510N IRF520N IRF530N IRF540N IRF640N IRF740 IRF840 IRF3205),P-channel-(IRF9540)
  • RoHS Compliant.
  • Package Quantity: 50 Pcs (Each model 5 pcs), Packed in A Plastic Storage Case.
SaleRank No. #14
Teenii STEM Physics Science Lab Basic Circuit Learning Starter Kit Electricity and Magnetism Experiment for Kids Junior Senior High School Students Electromagnetism Elementary Electronics LERBOR
  • Learn the basic circuit principles and investigate the electricity and magnetism by doing experiments with 50 Items including 40-pages full-color manual
  • A great electronics STEM kit for high school students (Grade 10,11,12) to enhance what is learned from physics class
  • Easy enough for junior students (Grade 7,8,9) and kids to explore in advance and get interested in physics science
  • The clearly illustrated manual encourages critical thinking by asking you questions before and after doing the experiments
  • 18 chapters with fun projects: Fruit Battery, Electric Bell Making and Hand Crank Generator
Rank No. #15
Freenove Ultimate Starter Kit for Raspberry Pi 4 B 3 B+ 400, 434-Page Detailed Tutorials, Python C Java Code, 223 Items, 57 Projects, Solderless Breadboard
  • 3 programing languages -> C, Python (compatible with 2&3) and Java.
  • 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
  • 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
  • Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
  • Get support -> Our technical support team is always ready to answer your questions.
SaleRank No. #16
ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items)
  • More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.
  • Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.
  • All the modules come soldered so they are easy to wire up.
  • Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit.
  • Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc.
Rank No. #17
REXQualis Super Starter Kit based on Arduino UNO R3 with Tutorial and Controller Board Compatible with Arduino IDE
  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners .
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself).
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc.
  • Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
  • All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.
Rank No. #18
ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA2560 Nano
  • Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit.
  • Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc.
  • Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website
  • 100% compatible with Arduino official IDE, Raspberry Pi and STM32.
  • Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.
SaleRank No. #19
LEGO Technic Catamaran 42105 Model Sailboat Building Kit, New 2020 (404 Pieces)
  • Take to the water with this racing Catamaran floating toy sailboat, packed with realistic features, like moving sails, dagger boards and rudder!
  • Ideal for developing engineering skills, this 2-in-1 LEGO Technic model catamaran kit lets kids build, play and rebuild, giving an introduction to how boats really work!
  • Kids can master the tactics of a world-class speed-sailor: angle the sails for the ultimate racing position, raise and lower the 2 dagger boards to maximize stability, and use the rudder to steer!
  • This 2-in-1 LEGO Technic model sailboat toy sparks imagination, offers endless build-and-play fun, and is a creativity-filled holiday, birthday or anyday gift for kids ages 8+ who like building challenges, catamarans and model sailboats
  • At over 12” (32cm) long, 8” (22cm) wide and 17” (44cm) high (from the bottom of the rudder to the top of the mast), this model sailboat is made for easy handling in the bathtub
Rank No. #20
HiLetgo BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit
  • 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
  • Voltage indication of motor driver output end; can solder heat sink.
  • Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
  • Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.

Last update on 2021-05-09 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Osoyoo Arduino Driver for our consumer to review. The reports above show ratings of the best overal, best cheap Osoyoo Arduino Driver to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.