The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Nissan Xterra Rear Door Strut of 2020 – Consumer Guide & Reviews

Rank No. #1
Maxpow Rear Tailgate Struts Hatch Lift Supports Struts 6137 Compatible With Xterra 2005-2015 Liftgate Hydraulic Shocks Dampers 2Pcs
  • Placement on Vehicle: Rear Tailgate Hatch Lift Supports
  • Part Number : 6137,216059, 90450ZL80A,90450-ZL80A,90451ZL80A,90450-ea000,90450EA000,90450ZL80A,90450EA00B,90450-eA00B,1040305
  • Specification: Extended Length: 18.95", Compressed Length: 12.41"
  • Special Features: Heavy gauge steel pressure tube provides long life; Teflon backup ring gives enhanced performance.
  • Attention: Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports.
Rank No. #2
Rear Hatch liftgate Lift Supports Struts Shocks Dampers for 2005-2013 Xterra 6137 (Pack of 2)
  • Placement on Vehicle: Liftgate
  • Fitment: 2005-2014 Xterra
  • Reference Number: PM1086, 6137, 216059, 90450ZL80A, 90450-ZL80A
  • Exact Fit, OE Quality Design Ensures Easy Installation and Precise Operation
  • We are committed to producing lift supports, also known as gas spring, prop, strut, shock, lift support, pistons, hydraulic, cylinders, damper
Rank No. #3
A-Premium Tailgate Rear Hatch Lift Supports Shock Struts Compatible with Nissan Xterra 2005-2013 6137 2-PC Set
  • 【Directly Fit】OE replacement lift supports shock struts, easy fit. Easy to install with simple tools in just minutes. No special tools required for installation.
  • 【Vehicle Fitment】Compatible with Nissan Xterra 2005-2013---Rear Tailgate
  • 【Reference Number】90450ZL80A, 90451ZL80A, 90450EA000, 90450EA00B, 6137
  • 【Function】High strength leak-proof piston seal; Superior rod finish resists corrosion; Easy lifting and reduce closing effort
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time
Rank No. #4
2pcs 6137 Rear Hatch Trunk Tailgate Liftgate Gas Lift Supports Struts Shocks for Nissan Xterra 2005-2013 90450ZL80A 90450EA00
  • Rear back door hatchback gas charged lift struts supports springs rods shocks props dampers for Nissan Xterra 2005 2006 2007 2008 2009 2010 2011 2012 2013 liftgate
  • Extended Length: 18.95", Compressed Length: 12.41"
  • Qty:2pcs | Placement on Vehicle: Liftgate / Rear Hatch | Left & Right Side
  • Interchange Part Number : 6137,SG325026,216059,90450ZL80A,90450-ZL80A,90451ZL80A,90450-ea000,90450EA000,90450ZL80A,90450EA00B,90450-eA00B,1040305
  • Easy to install in just minutes - no special tools required. And please check the below description and compatibility chart before your purchasing
Rank No. #5
A-Premium Rear Tailgate Lift Supports Shock Struts Compatible with Nissan Xterra 2001-2004 Sport Utility 2-PC Set
  • 【Perfect Fitment】Compatible with Nissan Xterra 2001-2004 Sport Utility---Rear Tailgate (Left and Right)
  • 【Reference Number】Replacement for 904507Z007, 904507Z105, 904507Z100, 4375
  • 【About Package】Package includes 2 pieces Lift Supports. Strong package with thick cardbord and air column bag, which provides shock absorption and protection during transportation.
  • 【Directly Fit】OE replacement Lift Supports Shock Struts, directly fit. Easy installation, no special tools required. High strength leak-proof piston seal; Superior rod finish resists corrosion; Easy lifting and reduce closing effort.
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee for all our gas spring prop struts---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to reach us at any time.
Rank No. #6
2Pcs 18.94 Inch Rear Back liftgate Struts Lift Supports Compatible With 05-15 Xterra SUV - Shock Gas Spring Prop Rod
  • Pls check our production description to make sure our lift support fit your vehicle
  • Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
  • Extended Length:18.94[Inch] Travel Length:6.89[Inch] Pounds Of Force:144[LBS]
  • NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
Rank No. #7
Qty (2) Fits Xterra 2005 To 2015 Liftgate Hatch Tailgate Lift Supports
  • This listing includes 2 Lift Supports For the Liftgate.
  • Extended Length from Center Mount to Center Mount is 18.94 in.
  • Lift Supports Depot supports are High Quality European Lift Struts. Designed to install easily in minutes, often times without special tools.
  • Installs easy with no special tools required.
  • Compatible with the following OEM Numbers: 216059,6137,822677,90450-ea000,90450EA000,90450-eA00B,90450EA00B,90450ZL80A,90450-ZL80A,90451ZL80A,PM1086
Rank No. #8
2Pcs 19.02 In Rear Back Lift Supports Compatible With NISSAN 2005-2015 XTERRA liftgate tailgate Hatch trunk Struts 05 06 07 08 09 10 11 12 13 14 15
  • Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges.
  • Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required.
  • Exact replacement, engineered for your application. Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
SaleRank No. #9
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
Rank No. #10
Rear Liftgate Lift Supports Shocks Struts Arms Springs Compatible With Nissan Xterra 2005-2015 By Rugged TUFF Pack of 2 RT591037 19 Inch
  • ✅ Replacement For 2005-2015 Nissan Xterra
  • ✅ Placement: Rear Liftgate Left + Right
  • ✅ Specs: Extended 18.95", Compressed 12.41", Force 645N
  • ✅ 1-Pair Limited Lifetime Warranty
  • ✅ Features: Easy to install, no special tools required.
Rank No. #11
22.13 IN 2Pcs Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Shock Gas Spring Prop Rod Compatible With NISSAN 2000-2004 XTERRA (Note: without Power Liftgate)
  • Pls check our production description to make sure our lift support fit your vehicle
  • Extended Length:22.13[Inch] Compressed Length:14.11[Inch] Pounds Of Force:102[LBS]
  • Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
  • NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
Rank No. #12
ECCPP Lift Supports Rear Liftgate and Glass Window Struts Gas Springs Shocks for Nissan Pathfinder 2005-2013 Compatible with 6110 Strut Set of 4
  • FITMENT - Gas struts shocks lift supports for Nissan Pathfinder 2005 2006 2007 2008 2009 2010 2011 2012 2013 Compatible with 6110 SG325023 SG325028 6607 lift support strut
  • QUALITY - Rust-resistant Nit-ride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate hatchback doors while they are open, no need to hold the door up with your head
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question
Rank No. #13
GOOACC 190 Pcs Car Retainer Clips & Fastener Remover - 18 Most Popular Sizes & Applications Auto Push Pin Rivets Set -Door Trim Panel Clips for Toyota, Honda, Nissan, Mazda - Bonus Fastener Remover
  • 【MADE Of DURABLE NYLON】- Our plastic fastener auto clips perfect fit your parts very tightly,which is strong, robust and vibration resistant, would not break or crack easily.
  • 【18 MOST COMMON SIZES】- Our auto Puch Type Retainer 190PCS Kit are available in 18 different sizes.Perfect replacement for broken retainers.Can meet the various needs of your car!
  • 【SAVE YOUR TIME】- No need to go to a auto parts store and look for different fasteners.And comes with a plastic box with 18 compartments for organized storage.You can find it easily.
  • 【TOUGH FASTENER REMOVER】- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.
  • 【WIDE APPLICATION】- Professional push clips are widely used for car panel, door trim, bumper and fender for Toyota Honda Nissan Mazda etc. Please feel free to contact us if there's any issue, we'll provide 100% satisfactory service.
Rank No. #14
GOOACC 425 Pcs Car Body Retainer Clips Set Tailgate Handle Rod Clip & Fastener Remover - 19 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips for GM Ford Toyota Honda Chrysler
  • 【 WORKS FOR ALMOST ALL SITUATIONS】- The kit contains 19 types of most common sizes of fastener clips, cover 6mm to 10mm hole sizes replacement for Ford, GM, Chrysler, Toyota, Nissan, Mazda, Jeep, 2001 MR2 Spyder, 06 350z,1996 Ford F-250, motorcycles, Honda , Chevy Silverado. But NOT ONLY for these cars, if the sizes and shape meet your needs well, it's also a useful kit.
  • 【 IMPACT RESISTANT PUSH RIVETS】 - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
  • 【 PREFECT FOR WHAT YOU NEED 】- Up to 425 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted.
  • 【 BONUS FASTENER REMOVER】 - Allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • 【 WIDELY APPLICATION】- Theses push clips are widely used for trim panel clips, door trim clips, door panel clips, bumper clips, Fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
Rank No. #15
Beneges 2PCs Liftgate Lift Supports Compatible with 2005-2013 Nissan Xterra Rear Hatch Tailgate Gas Spring Charged Struts Shocks Dampers 90451ZL80A, 6137
  • 【Fit Vehicles】- Nissan Xterra 2005-2013 Liftgate.
  • 【Related Parameters】- Extended Length: 18.95 IN, Compressed Length: 12.41 IN.
  • 【Advanced Process】- The Rods are straightly aligned, round grinded, and then galvanized, polished. The cylinder tubes are cold rolled and painted with epoxy paint. Multiple processing prolongs lift struts life.
  • 【Premium Manufacturer】- Beneges is qualified manufacturer with SGS approved. All our lift supports meet ISO/TS16949 standard and OEM specifications. All our products are ONE year FREE change.
  • 【Kind Note】- Please read description and compatibility chart before purchase and freely contact with our customer service if any question.
Rank No. #16
BDK PolyPro Car Seat Covers Full Set in Charcoal on Black – Front and Rear Split Bench Protection, Easy to Install, Universal Fit Accessories for Auto Truck Van SUV
  • PROTECTS AGAINST STAINS – These are the perfect seat covers for your new car, or even a car that’s just new-to-you. Our car seat covers provide protection against spills and stains that might occur inside of your vehicle.
  • BREATHABLE MATERIALS – We use specially selected materials for maximum comfort during your daily commute. The high-quality poly outer layer provides enhanced ventilation so that you stay cool and comfortable during your drive.
  • STYLISH DESIGN – Refresh the look of your vehicle and turn some heads along the way. This full set of seat covers features a stylish two-tone design with stitched accents, making it easy to add a splash of color to your interior.
  • EASY TO INSTALL – The best investment for your new vehicle might also be the quickest. Follow our simple 3-step installation process to install the front seat covers before finishing off with the rear bench seat cover and headrest covers.
  • UNIVERSAL FIT – Our seat covers are designed to fit most vehicles including cars, trucks, vans and SUVs. Please see our product images for fitment examples. Some additional work may be required to create a ‘perfect’ fit.
Rank No. #17
2Pcs 22.1 Inch Rear Back liftgate tailgate Hatch trunk Struts Lift Supports Fits 2001-2004 Xterra Fits SUV without Power liftgate - Shock Gas Spring Prop Rod
  • Pls check our production description to make sure our lift support fit your vehicle
  • Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
  • Extended Length:22.1[Inch] Travel Length:7.5[Inch] Pounds Of Force:107[LBS]
  • NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
Rank No. #18
2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" compressed, 55 lbs of pressure ea) compatible with ARE, ATC, Snugtop, Leer Campers. MEASUREMENT REQ'D! Incl 4 ball mounts+angled & straight fittings!
  • CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in other camper canopy parts, RV door shocks / RV awning struts, boat lift parts / boat hatch spring lift, gas struts for cabinets, shed window, gas struts for heavy lid, gas lift storage bed, toolbox strut, etc. These gas shock lift supports CANNOT be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
  • Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts / LEER camper shell parts / LEER topper replacement struts, ARE truck topper parts / ARE truck cap parts, Glasstite topper parts, Century topper parts, Snugtop replacement parts and many other gas shocks / gas springs / gas lift cylinder. They are compatible with many brands, including stabilus lift o mat gas strut and Suspa.
Rank No. #19
GOOACC 150 pcs Push-Type Bumper Fasteners Rivet Clips-2 Sizes Universal Auto Clips & Fastener for Bumper Fender Clips Replacement-Fastener Removal Tool Included (150PCS Clip)
  • IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
  • TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.
  • APPLICATION: Widely used for door trim, fender, bumper, radiator shield yoke, side skirt, grille, engine cover and splash shield retainers.Better than other clips
  • SIZES: One is measured Head Dia: 20mm; Stem Length: 22.8mm; Fits Into: 8mm hole. The other :Head Dia: 20mm; Stem length: 16 mm; fits: 10mm hole
  • PACKAGE INCLUDED: 100 pcs universal 8 MM push-type plastic clips,50 pcs 10mm Nylon Bumper Fender Flare Fastener,1 pcs 5-inch Fastener Remover.
Rank No. #20
Rear Hatch Liftgate Lift Supports Struts Shocks Gas Springs 6156 For 2007-2014 Chevrolet Suburban 1500,2007-2013 Chevrolet Suburban 2500,2007-2014 Chevrolet Tahoe,2007-2014 GMC Yukon,Pack of 2
  • Rear Hatch Liftgate Lift Supports Placement on Vehicle: Rear Left & Right
  • Extended Length [in] 22.70.Compressed Length [in] 15.45
  • Easy to install in just minutes and no special tools required for installation
  • Interchange Part Number: 6156,SG330076,PM1062,025060,10029990,024851,4705WW,4705WW, 9173VX,9524VU,4482YC,9173VX,22743451,10029990,15854712,15827433
  • Fit for Chevrolet Suburban 1500 2007 - 2014, Chevrolet Suburban 2500 2007 - 2014, Chevrolet Tahoe 2007 - 2014, GMC Yukon 2007 - 2014, GMC Yukon XL 1500 2007 - 2014, GMC Yukon XL 2500 2007 - 2014 Liftgate

Last update on 2021-11-19 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Nissan Xterra Rear Door Strut for our consumer to review. The reports above show ratings of the best overal, best cheap Nissan Xterra Rear Door Strut to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.