The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Narrow Band Width Hose Clamps of 2020 – Consumer Guide & Reviews

Rank No. #1
Swordfish 80050-8mm Width Band Stainless Steel Hose Clamp Set, DIY your hose clamp
  • 8mm wide x 3 meter (9.8 ft) long stainless steel clamping band
  • 8pcs 6mm hex head tensioning clamps with slotted driver
  • Tensioning band can be cut to any length using tinsnips to suit a variety of hose sizes
  • Self-Built your hose clamp
  • Material: stainless steel 304
Rank No. #2
Breeze Miniature Stainless Steel Hose Clamp, Worm-Drive, SAE Size 10, 9/16" to 1-1/16" Diameter Range, 5/16" Band Width (Pack of 10)
  • Stainless steel band for resistance to scaling and corrosion
  • Series 300 stainless steel screw resists corrosion
  • Band width of 5/16” for better fit on small diameter hoses
  • Miniature size for small hoses installed in confined spaces
  • For use in air and fuel line applications
Rank No. #3
Norma 01266704060-000-0542 Hose Clamps, 50 mm-70 mm x 9 mm W4 (Pack of 10), 2, Pack of 10
  • Package length :4.8 cm
  • Package width :16.8 cm
  • Package height :17.0 cm
  • Made in Germany
Rank No. #4
Oetiker 17800170 Stainless Steel Self-Tensioning Steples Hose Clamp, Bolted, 9 mm Band Width, 18 mm - 24 mm Hose OD Range (Pack of 10)
  • Screw-type tightening mechanism for fitting a broader range of hose diameters over ear clamps
  • Self-tensioning mechanism for accommodating changes in diameter due to thermal cycles
  • Narrow band for concentrating clamping force in compliance with SAE J1508 Type SSPC
  • Stainless steel for resisting scaling and corrosion
Rank No. #5
Precision Brand M16S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, 11/16" - 1-1/2" (Pack of 10)
  • Series 300 stainless steel band helps provide resistance to corrosion in marine environments
  • Stainless steel screw resists corrosion
  • Miniature size for small hoses installed in confined spaces
  • Band width of 5/16” better fits small hoses than larger widths
Rank No. #6
VIGRUE Hose Clamps Assortment 100% 304 Stainless Steel Adjustable Worm Gear Hose Clamps 80pieces with Wrench, Fuel Line Clamp for Plumbing Automotive and Mechanical Applications (8-44mm Range)
  • RELIABLE QUALITY- The whole hose clamp (including the band, housing and screw) are all made of 100% 304 stainless steel material with 0.6mm thickness, which is very sturdy, strong and reliable; Salt resistant, anti-rust, anti-corrosion, waterproof, oil-proof characteristic for long-term use.
  • WIDE ADJUSTABLE SIZE RANGE- Clamps are flexible and ductile with wide adjustable size 8-44mm range. Clamp’s diameter can be adjusted according to a worm gear mechanism for precisely sealing pressure.
  • 8 POPULAR CLAMP SISES: 10PCS 5/16-29/64"(8-12mm), 10PCS 3/8-5/8"(10-16mm), 10PCS 1/2-3/4"(13-19mm), 10PCS 5/8-1"(16-25mm), 10PCS 3/4-1- 5/32"(19- 29mm), 10PCS 7/8-1-1/4"(22-32mm), 10PCS 1-1-1/2"(25-38mm), 10PCS 1-1/4-1-23/32"(32-44mm); and the largest one size is 12.7mm wide, the other sizes are 8mm wide
  • WIDELY APPLIED: Clamps are adopted in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in such both indoor or outdoor situations as automotive, industrial, boat/ marine, shield, household and so on
  • AFTER SALE SERVICE: Whether it's your first VIGRUE purchase or you're back for more, rest assured that we're in this together: All VIGRUE products are backed by our 12-Month product service. If you need a single size or different quantity, welcome to contact
Rank No. #7
Breeze Miniature Stainless Steel Hose Clamp, Worm-Drive, SAE Size 8, 1/2" to 29/32" Diameter Range, 5/16" Band Width (Pack of 10)
  • Stainless steel band for resistance to scaling and corrosion
  • Series 300 stainless steel screw resists corrosion
  • Band width of 5/16” for better fit on small diameter hoses
  • Miniature size for small hoses installed in confined spaces
  • For use in air and fuel line applications
Rank No. #8
Oetiker 16700035 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 25.4 mm (Closed) - 28.6 mm (Open) (Pack of 150)
  • 360° StepLess: uniform 360° compression and uniform surface pressure
  • Narrow band: concentrates transmission of clamping force, less weight
  • Clamp ear: compensates for component tolerances, adjustable surface pressure
  • Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion
  • Specially formed strip edges: reduced risk of damage to parts being clamped
Rank No. #9
Oetiker 16700003 StepLess Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 7 mm (Closed) - 8.7 mm (Open) (Pack of 150)
  • 360° StepLess: uniform 360° compression and uniform surface pressure
  • Narrow band: concentrates transmission of clamping force, less weight
  • Clamp ear: compensates for component tolerances, adjustable surface pressure
  • Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion
  • Specially formed strip edges: reduced risk of damage to parts being clamped
Rank No. #10
Oetiker 16700033 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 23.9 mm (Closed) - 27.1 mm (Open)(Pack of 150)
  • 360° StepLess: uniform 360° compression and uniform surface pressure
  • Narrow band: concentrates transmission of clamping force, less weight
  • Clamp ear: compensates for component tolerances, adjustable surface pressure
  • Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion
  • Specially formed strip edges: reduced risk of damage to parts being clamped
Rank No. #11
NORMA 01266704050-000-0541 Hose Clamps, 40 mm-60 mm X 9 mm W4 (Pack of 10)
  • Made in Germany
  • Package height :12.6 cm
  • Package length :8.0 cm
  • Package width :9.6 cm
Rank No. #12
Oetiker 16705989 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 37.8 mm (Closed) - 41 mm (Open) (Pack of 150)
  • 360° StepLess: uniform 360° compression and uniform surface pressure
  • Narrow band: concentrates transmission of clamping force, less weight
  • Clamp ear: compensates for component tolerances, adjustable surface pressure
  • Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion
  • Specially formed strip edges: reduced risk of damage to parts being clamped
Rank No. #13
Oetiker 16702498 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 16.6 mm (Closed) - 19.8 mm (Open) (Pack of 50)
  • Genuine oetiker clamps
  • 360° stepless design - no steps or gaps on inner circumference
  • Narrow band, concentrated seal compression
  • Specially formed strip edges reduce the risk of damage to the part being clamped
  • Please note - the size of the clamp denotes the inner dimension (id) of the clamp
Rank No. #14
Oetiker 16702494 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 13.7 mm (Closed) - 16.2 mm (Open) (Pack of 10)
  • Genuine oetiker clamps
  • 360° stepless design - no steps or gaps on inner circumference
  • Narrow band, concentrated seal compression
  • Specially formed strip edges reduce the risk of damage to the part being clamped
  • Please note - the size of the clamp denotes the inner dimension (id) of the clamp
Rank No. #15
Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) - 13.3 mm (Open) (Pack of 50)
  • Genuine oetiker clamps
  • 360° stepless design - no steps or gaps on inner circumference
  • Narrow band, concentrated seal compression
  • Specially formed strip edges reduce the risk of damage to the part being clamped
  • Please note - the size of the clamp denotes the inner dimension (id) of the clamp
Rank No. #16
Oetiker 16700001 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 5.8 mm (Closed) - 7 mm (Open) (Pack of 25)
  • Genuine oetiker clamps
  • 360° stepless design - no steps or gaps on inner circumference
  • Narrow band, concentrated seal compression
  • Specially formed strip edges reduce the risk of damage to the part being clamped
  • Please note - the size of the clamp denotes the inner dimension (id) of the clamp
Rank No. #17
Oetiker 16700026 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 19.4 mm (Closed) - 22.6 mm (Open) (Pack of 200)
  • 360° StepLess: uniform 360° compression and uniform surface pressure
  • Narrow band: concentrates transmission of clamping force, less weight
  • Clamp ear: compensates for component tolerances, adjustable surface pressure
  • Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion
  • Specially formed strip edges: reduced risk of damage to parts being clamped
Rank No. #18
Oetiker 16700020 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 15.3 mm (Closed) - 18.5 mm (Open) (Pack of 10)
  • Genuine oetiker clamps
  • 360° stepless design - no steps or gaps on inner circumference
  • Narrow band, concentrated seal compression
  • Specially formed strip edges reduce the risk of damage to the part being clamped
  • Please note - the size of the clamp denotes the inner dimension (id) of the clamp
Rank No. #19
Oetiker 16700024 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 17.8 mm (Closed) - 21 mm (Open)(Pack of 150)
  • 360° StepLess: uniform 360° compression and uniform surface pressure
  • Narrow band: concentrates transmission of clamping force, less weight
  • Clamp ear: compensates for component tolerances, adjustable surface pressure
  • Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion
  • Specially formed strip edges: reduced risk of damage to parts being clamped
Rank No. #20
4 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (4" Hose Clamp)
  • NO MORE TOOLS! – Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
  • LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
  • OFTEN USED IN THESE APPLICATIONS – These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
  • 304 STAINLESS STEEL HOSE CLAMP- The 4” diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
  • FLEXIBLE ADJUSTABLE SIZE RANGE- 4 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 4-7/16” (4.440” or 112.77mm) in full diameter down to appx. 3-7/16” (3.440” or 87.32mm) at its most compact diameter.

Last update on 2020-11-13 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Narrow Band Width Hose Clamps for our consumer to review. The reports above show ratings of the best overal, best cheap Narrow Band Width Hose Clamps to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.