The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Mp3 Decoder Bluetooth of 2020 – Consumer Guide & Reviews

Rank No. #1
Onyehn 2pcs Bluetooth Audio Receiver Board 4.2 MP3 Lossless Decoder Wireless Stereo Music Audio Modification 5W+5W Car Speaker Amplifier
  • After successful pairing, if the power is turned on for the second time, the module will automatically connect and do not need to be paired again.
  • The module does not support reverse connection protection, so the power supply must not be reversed, otherwise the module will be damaged.
  • .Working voltage is DC 3.7V-5V.Module will be damaged if input voltage is more than 5.5V.
  • It is recommended to input 5V 1A.If the power supply is insufficient, the speaker sound will be small. When the power supply is seriously insufficient, the speaker will make a "tick" sound or even no sound.
  • It is recommended to connect 2pcs 4 ohm 3W (5W) speakers; if connect 2ohm speakers, the power amplifier chip will heat up, causing the chip to burn.
Rank No. #2
Bluetooth MP3 WMA Decoder Board 12v FM Wirelss Audio Module Support USB TF FM Hands-Free Call
  • Support Bluetooth hands free calls. Support DC 12V + 5V Micro USB 5-pin input
  • Support APE FLAC WAV WMA MP3 FLAC lossles format. Support USB disk / TF / Bluetooth / FM modes.
  • Supports music play from USB disk / TF card. Support power off memory function
  • With Blue backlight function. Comes with remote control operation
  • Support multiple EQ sound modes, mute
Rank No. #3
AITRIP 4pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module Compatible with Arduino Raspberry Pi
  • This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
  • Package Includes: 4pcs M38(HW-406) Wireless Bluetooth MP3 Audio Receiver Board
  • Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND. The maximum operating current is 5V2A. It is recommended to use a regulated 5V2A power supply for better sound quality.
  • Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the module amplifier output. Audio output: output left and right stereo audio signals, which can be connected to two 2-8 ohm, 3-5W speakers, and 4 Euro 5W speakers.
  • This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
Rank No. #4
2pcs MP3 Bluetooth Decoder Board Lossless Car Speaker Audio Amplifier Board Modified Bluetooth 4.1 Circuit Stereo Receiver Module 5V
  • Function: The speaker amplifier supports decoding and paired voice prompts
  • Power Supply 3.7-5V
  • Support Profile A2DP/AVCTP/AVDTP/AVRCP/HFP
  • USB powered Universal Micro USB 5V power supply
  • Support MP3 format, playing power on automatically, LED indocator light when module is working
Rank No. #5
ASHATA Mp3 Decoder Board, Bluetooth Lossless MP3 Sofa Stool Speaker Decode Board English Version,Digital Audio Decoder Receiver Music Transmitter Module Board with AUX,FM, USB,SD,Bluetooth
  • This is a 5V speaker decode board with amplifier, directly connected to the speaker, with Bluetooth and memory card function.4 buttons, 10W amplifier (2*5W) with AUX, FM, USB, SD and Bluetooth
  • LIN adjustable to control external audio input volume and mute
  • The potential of the panel is dual-purpose for power switch and volume adjustment
  • Support for Bluetooth4.0EDR.Support USB/SD/Bluetooth/FM/LINE automatic switching.Support MP3/WMA/WAV/FLAC format music.Support USB, SD, MMC card for playing.Support USB/SD card switching, previous song, next song, fast forward, fast reverse, knob volume adjustment.
  • Support FAT16, FAT32 file system. Supports songs of MP1 Layer3, MP2 Layer3, and MP3 Layer3 versions. Support power-off memory function: remember the song and volume played before power-off.
Rank No. #6
HiLetgo 3pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
  • Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND. The maximum operating current is 5V2A. It is recommended to use a regulated 5V2A power supply for better sound quality.
  • Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the module amplifier output. Audio output: output left and right stereo audio signals, which can be connected to two 2-8 ohm, 3-5W speakers, and 4 Euro 5W speakers.
  • This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
Rank No. #7
USB MP3 Decoder Board 12V Car Stereo Hands-Free Call Bluetooth Recording Module 7~12V Wireless USB TF AUX FM Radio Amplifier Remote Digital Display Support MP3/ USB/TF Card Function
  • Support headphone amplifier and dual-use (plug headphones speaker does not ring, out of the headset speaker sound). 3P reserve the rear panel output terminal block (optional); support for external touch keys (optional); Support folder choose to play, loop mode.
  • Support USB / SD / Bluetooth / FM / AUX switch automatically. Tips and conversion to cable (signal sound or voice in English optional).
  • Supports MP3 / WMA / APE / WAV music formats, electronic bell. MP3 songs 32-320kbps, WAV / APE is: 1411kbps or less.
  • Support the power and memory function: memory off before the song played and the volume can be memorized to the current point.
  • Support USB / card switch, the song, the next song, volume control, EQ, play / pause, stop, single repeat, mute, shutdown, direct election songs.
SaleRank No. #9
V BESTLIFE DC 5V/12V Bluetooth 5.0 Audio Decoder Board Audio Module USB AUX SD FM Radio Lossless MP3/WMA/WAV/FLAC/APE Decoder Board Module(Black)
  • Support 4 color colorful spectrum luminescence display.
  • Support Bluetooth 5.0 version.Support power off memory function: first power off memory before power off song and volume can be remembered to the current song. Break point memory (when the usb flash disk or memory card is pulled out in the state of play, the break point will be played after 3 seconds or so.
  • Call back: long press MODE to call back the last call number in bluetooth MODE.Support USB/card switch, previous song, next song, volume adjustment, EQ, play/pause, stop, single repeat, mute, shutdown, directly selected songs.
  • Support audio input 3.5AUX+3P AUX.Support for USB/memory/Bluetooth/FM/AUX switching. Conversion prompt and incoming telegram number (Chinese and English are optional).
  • Support USB sound card function. Support MP3/WMA/WAV/FLAC/APE format music, electronic clock. MP3 songs 32-320 KBPS, lossless APE/WAV/FLAC is below 1411kbps.
Rank No. #10
MP3 Decoder Wireless Bluetooth Audio Decoder Board 12V WAV WMA FLAC Decoding Module USB FM with Lyrics Display Recording
  • The item is good quality.Test before shipping.
  • we will test the product Before shipping.Estimated Delivery Time: 6-24 days(trackable)----- We provide Expedited Shipping service : 3-8 days.(excluding handling time).If the order amount above US $120, we will use Expedited Shipping service for free.
  • We are a professional distributor of electronic components. We also sell other kinds of products. just search the model number in our store.
  • We make every effort to provide customers with satisfactory service.any question,please feel free to contact me.
Rank No. #11
Decoder Board DC12V Bluetooth MP3 Decoder Board Audio Module USB S D TF FM Radio Lossless WMA/WAV Silver/Black 2.75×1.45 Inch Mounting Hole Spacing(Black)
  • ◇ DUAL-CHANNEL AUDIO OUTPUT---The decoder board is of dual-channel audio output without amplifier, suitable for devices which have amplifier
  • ◇ FM RADIO FUNCTION---The decoder board is of FM radio function, allowing you to listen to the local FM radio after connected to the antenna
  • ◇ WMA & WAV---The decoder board supports lossless MP3 format songs, also support lossless WMA and WAV formats
  • ◇ LED DISPLAY---The decoder board is of digital LED display, which can show the current working status clearly
  • ◇ MAIN USAGE---The decoder board can read songs from a USB flash disk, S D card, MMC card; if you use a micro S D(TF) card, an adapter is required
Rank No. #12
Bluetooth MP3 Decoding Board, Golden^Li 12V Wireless Bluetooth Audio Remote Module Support TF SD Card/USB/FM Radio for Speaker or Other Appliances
  • [Widely Application] The bluetooth MP3 decoder board can easily used to improve the sound quality of ordinary audio, widely used in toys, gifts, fitness equipment, household appliances, broadcasting systems, etc.
  • [High Quality Sounds] 12v bluetooth mp3 decoding board can switch signal directly, and insert upport USB, TF card. Bluetooth 3.0 + EDR (after working in tandem with mobile phones, you can implement a wireless music game). Can use USB / TF / bluetooth / FM / line switch and Mp3 / wma, wav lossless music decoding chip.
  • [Smart Switch] Support SD card / USB flash switching, songs selection, volume adjustment, EQ, play / pause, stop, mute, shutdown, direct election song.
  • [ File System] Support for FAT16, FAT32 file system. Support for MP1 layer3, MP2 layer3, mp3 layer3 version of the song. Supports power-off function: memory plays songs and volume before power is turned
  • [Specification] The Installation pitch is 92 mm wide, Installation hole size is 83 x 20 x 38 mm and overall dimensions: is 107*25*38mm/ 4.21*0.98*1.5 ". Input voltage:12V. Made of the high quality plastic. off.
SaleRank No. #13
Ximimark 1Pcs 3.7-5V MP3 Stereo Bluetooth 4.2 Receiver Module Lossless Decoder Board Car Stero Speaker Amplifier Module DIY Speaker Modified
  • Support Bluetooth 4.2 mode, support automatic reply, support lossless decoding WAV / APE / FLAC / MP3 files, onboard stereo Class D amplifier module, maximum output 5W + 5W.
  • Two 4Ω6Ω8Ω/3W (5W) speakers can be connected.
  • Support Profile A2DP/AVCTP/AVDTP/AVRCP/HFP.
  • SNR: 90dB/THD+N: -70dB/Crosstalk: -86dB/DNR: 91dB.
  • LOS:>15m.
Rank No. #14
DEVMO Wireless Bluetooth MP3 Player WMA Decoder Board Audio AUX Module 12V Hands-Free USB TF FM Radio for Car
  • ★Display Mode: Single cycle and repeat all switch, it is repeat all as opening
  • ★Support Bluetooth hands free calls. Support DC 12V + 5V Micro USB 5-pin input
  • ★Support APE FLAC WAV WMA MP3 FLAC lossles format. Support USB disk / TF / Bluetooth / FM modes.
  • ★Supports music play from USB disk / TF card. Support power off memory function
  • ★With Blue backlight function. Comes with remote control operation
Rank No. #15
MP3 WMA Decoder Board Audio Wireless Bluetooth 4.2 Module 12V, USB/SD Card/Bluetooth/FM Switching Support
  • 【BLUETOOTH 4.2 SUPPORT】The mp3 module support Bluetooth 4.2. With blue backlight function, it support USB sound card function and Micro USB 5V power input. And also has power off memory function---memorize playing songs and volume before power off.
  • 【SUPPORT FOLDER SELECTION FROM SD CARD OR USB DISK 】The mp3 module support folder selection and then music playback (remote control operation or panel operation) from SD card or USB disk.
  • 【USB/SD CARD/BLUETOOTH/FM SWITCHING SUPPORT】The mp3 module support USB/SD card/Bluetooth/FM switching. Conversion prompt (Signal, Chinese, English voice prompt optional).
  • 【MULTIPLE MUSIC FORMATS SUPPORT】The decoder supports MP3/WMA/WAV/lossless APE/FLAC format music. MP3 Songs: 2-320kbps, WAV/WMA: 1411kbps and below.
  • 【MULTI-FUNCTION SUPPORT】The mp3 module support SD card / USB flash switching, songs selection, volume adjustment, EQ, play /pause, stop, mute, shutdown, direct election song.
Rank No. #16
Car Music MP3 Decoder Board Audio Wireless Bluetooth Module with Remote Control, Support USB Disk/SD/Bluetooth/FM/LIN Modes, Supports Hands-Free Calls
  • Support Bluetooth function and Micro USB 5V power input.
  • Support USB disk / SD / Bluetooth / FM / LIN modes.
  • Supports music play from USB / SD / MMC card.
  • Comes with remote control operation. Digital display.
  • Support multiple EQ sound modes, mute.
Rank No. #17
CTYRZCH Bluetooth MP3 Decoding Board Module w/ SD Card Slot / USB / FM / Remote Decoding Board Module M011
  • √ Notice: This is the MP3 Decoding Board with TF Car Slot. Don't buy it by mistake.
  • √ Support USB/TF Card Slot/Bluetooth/FM/AUX switching, also supports folder selection and playback
  • √ Stereo Bluetooth with a call can also receive hands-free calls
  • √ DIY speakers and modified audio / car rare weapon
  • √ Support MP3/WMA/WAV/FLAC/APE format music.
Rank No. #18
HiLetgo 2pcs MP3 Bluetooth Decoder Board Lossless Car Speaker Audio Amplifier Board Modified Bluetooth 4.1 Circuit Stereo Receiver Module5V
  • MP3 Bluetooth Decoder Board Lossless Car Speaker Audio Amplifier Board
  • It can insert TF card, can read U disk and play TF card.
  • Supports Bluetooth 4.1, automatic link back function, WAV+APE+FLAC+MP3 lossless decoding, stereo output, and TF slot.
Rank No. #19
fosa 12V Bluetooth 4.2 MP3 Decoder Board, MP3 Wireless Bluetooth Speaker Lossless Audio Decode Board Module, Support APP and APK, LED Display, Remote Decoding Board Module
  • Support Bluetooth 5.0 Version and Hands-free Calling - Call function is optional. After the product and mobile phone are paired, the wireless receiving mobile phone plays all formats of music. In addition, you can also pick up the phone hands-free. When you call, you hear a "beep-beep". Press Pause to answer the call. It also supports phone call back. Press the pause button for a short time under the Bluetooth state to call back the last call number.
  • Support USB Sound Card Function - Use a double-ended USB cable, plug one end into the computer and the other end into the panel USB, the computer can play music through the module's audio output to the audio. It also supports switching between USB / card / Bluetooth / FM / AUX.
  • Loop Mode - Press the "arrow" or "RPT" symbol key during playback, random (RAN) / single cycle (ONE) / folder cycle (FOL) / full song cycle (ALL). If it is in the current folder Press (FOL) to play all songs in this folder.
  • Support Folder Selection Playback - Requires remote control operation. Convenient to select and play different music categories. Put the music categories in different folders in the card / U disk, DJ music / background music / children's songs. In the playback mode, long press the up or down song, you can select the folder to play, at the same time there will be F001, F002 on the screen.
  • Applicable to - Used in home combination audio, car audio and computer multimedia audio, professional active audio, IPOD audio, AV power amplifier, massage chair, electronic gifts, electronic toys, etc. Especially suitable for speakers (loud) DIY enthusiasts.
Rank No. #20
12V Car Bluetooth MP3 Decoder Board, Floor88 Wireless Bluetooth Audio Decoding Module with Remote Control - Support TF SD Card/USB/WMA AUX FM Radio for Speaker or Other Appliances
  • 【High Quality Sounds】12V car bluetooth mp3 decoding board can switch signal directly, and insert support USB, TF card, Bluetooth 3.0 + EDR (after been paired with mobile phones can realize wireless music play). Can use USB / TF / Bluetooth / FM / LINE switch and MP3/WMA/WAV lossless music decoding chip
  • 【Smart Switch】Support TF/SD card / USB flash switching, support Bluetooth PREV, NEXT, fast forward, fast rewind, songs selection, volume adjustment, EQ, play / pause, stop, mute, shutdown, direct election song. Note: Non-smart phones (android) have to enter the password - 0000
  • 【File System】The remote decoding board module support for FAT16, FAT32 file system. Support for MP1 layer3, MP2 layer3, MPp3 layer3 version of the song and 32-320 KBPS MP3 songs. Supports power-off function: memory plays songs and volume before power off
  • 【Specifications】The Installation pitch is 92 mm wide, Installation hole size is 83 x 20 x 38 mm and overall dimensions: is 107*25*38mm/ 4.21*0.98*1.5 ". Input voltage:12V. Made of the high quality plastic
  • 【Wide Applications】The 12V car bluetooth MP3 decoder board can easily used to improve the sound quality of ordinary audio, widely used in toys, gifts, fitness equipment, household appliances, broadcasting systems, etc.

Last update on 2020-12-28 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Mp3 Decoder Bluetooth for our consumer to review. The reports above show ratings of the best overal, best cheap Mp3 Decoder Bluetooth to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.