The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Miter Gauge For Kreg Router Table of 2020 – Consumer Guide & Reviews

Rank No. #1
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
SaleRank No. #2
KREG KMS7102 Table Saw Precision Miter Gauge System, Blue
  • Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
  • Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
  • Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
  • Microadjuster allows additional angle adjustment to 1/100th degree
  • Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty
Rank No. #3
Kreg KMS7101 Table Saw Precision Miter Gauge
  • Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
  • Vernier scale allows fast, 1/10th degree angle adjustments
  • Microadjuster allows additional angle adjustment to 1/100th degree
  • Postive stops at 0, 10, 22-1/2, 30 and 45 degrees
  • Factory Calibration. Guaranteed out of the box to .003 accuracy of 6"
Rank No. #4
Router Table Set Up Bars #PRS3400 Replace for Kreg-(Set of 7)
  • Exclusive 3-gauge design perfect for many applications and each bar features steps on top, bottom and ends
  • Concave step on bottom to precisely adjust height,Top step acts as gauge to test depth of completed cuts
  • End step sets distance from tablesaw blade or router bit to fence
  • Soft aluminum build to prevent router bit and saw blade damage
Rank No. #5
Incra MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
  • Engraved stainless steel primary scale for precision accuracy
  • 41 laser cut V-stops for extreme accuracy at all popular angles
  • Patented GlideLOCK miter bar with 6 expansion points for quick repeats
  • 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths
  • INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy
Rank No. #6
Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7
  • Set Up Bars come in a portable case with 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" & 1/2" bars
  • The step on the top edge of each bar acts as a gauge to test the depth of your completed cuts
  • Bars are made from a soft aluminum which is designed to prevent damage to your router bit or saw blade if contact is made during setup
  • Unique design straddles the Router Bit or saw blade to allow for more precise height adjustment
  • Step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts
Rank No. #7
Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4” x 3/8” with a 1/8” “T” slot (with slight variances from brand to brand) running the length on the bottom of the slot.
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
Rank No. #8
Wixey WR25 3" Mini Digital Height Gauge
  • Displays inches with fractions or millimeters
  • Lays flat for fence to blade or bit positioning
  • Locking rule for repeat setting
  • Measure bore and slot depths with the plunger attachment
Rank No. #9
POWERTEC 71489 Aluminum Multi T-Track Fence with Laser Measure Left to Right, 3” High x 24" Long Multi Track
  • INCLUDES: (1) Multi T Track Fence (24 inch)
  • FUNCTION: This multi-t track can be used for a wide assortment of woodworking projects, including creating general fixtures and jigs, workstations or customized fences (router, drill press and miter gauge)
  • OPTIMAL UTILITY: 24 inches long (superior straightness - laser measured left to right), spaced 3/4” apart (on center), 3/4” thick and 3 inches high
  • UNIVERSAL: Part of our exclusive multi-track system, this multi-functional item accepts the most common accessory fasteners 1/4” T-bolts, 5/16” T-bolts and 1/4” hex bolts
  • PREMIUM GRADE: High quality tracks made with corrosion resistant extruded aluminum for strength and long-term durability
Rank No. #10
Incra MITERV27 Miter V27 Miter Gauge
  • Miter Gauge featuring 27 angle stops for precise incremental control
  • No-nonsense design and compact size
  • Delivers extreme miter cutting accuracy
  • Four expansion points adjust for zero side play
  • Universal Mounting Bracket supports any user-made fence
SaleRank No. #11
POWERTEC 71005 Deluxe Table Saw Miter Gauge
  • INCLUDES: (1) Table Saw Miter Gauge
  • FUNCTION: Provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at any angle with high precision
  • FEATURES: Positive stops at all common angles for exceptional accuracy, a large ergonomical grip for control and comfort, set screws to remove any play, and a tip resistant washer to keep the unit steady when extended over your work surface
  • COMPATIBILITY: Fits and accommodates most standard 3/4 x 3/8 inch miter slots, with or without t-slotted miter slots, including DeWalt, Delta, Jet, Craftsman, Bosch and other brands of table saw and router table slots
  • PREMIUM BUILD: Made with a combination of a high quality aluminum head and solid steel miter bar, this woodworking gauge was built for professional use and long-term durability
Rank No. #12
POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” multi –track fence with 27 Angle Stops
  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right
Rank No. #13
Bosch Benchtop Router Table RA1181
  • Benchtop router table design – Features a large aluminum top for extended work area, durability and precision
  • Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment
  • Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility
  • Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean
  • Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection
Rank No. #14
WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop
  • Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions
  • Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots
  • 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head
  • Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans.
Rank No. #15
Porter Cable PCB220TS Table Saw Miter Gauge Assembly # 5140083-27
  • Includes (1) 5140083-27 Miter Gauge
  • New, Bulk Packed
  • Genuine Porter Cable Replacement Part
  • Consult owners manual for proper part number identification and proper installation
  • Please refer to list for compatibility
Rank No. #16
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
  • Protect hands and prevent kickback like never before
  • Powerful high-friction durable grip for extreme hold
  • Precision cutting and control down to 1/4" Ripping
  • Fully adjustable for easy handling
  • Work with small stock safely on the table saw, Router table, Jointer, & Band saw
Rank No. #17
Featherboard, DRILLPRO Double Featherboards Feather Loc Board for Table Saws Band Saws Router Tables Fences Tools Miter Gauge Slot Woodworking
  • ❶Featherboard are Made from a HIGH-TECH POLYMER and each one has 13 ANGLED FINGERS that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.
  • ❷4 MITER BARS that fit most standard miter slots (3/8 x 3/4 Inch). Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
  • ❸This unique Featherboard can be quickly QUICKLY and EASILY connected to a miter slot or t-slot.
  • ❹A dramatic increase the ACCURACY, QUALITY and SAFETY of the cuts.
  • ❺EASY to USE, EASY to INSALL and HIGHLY DURABLE.
SaleRank No. #18
DELTA Deluxe Miter Gauge
  • This part is compatible with models including; 34-710,34-440 (90C12580 THRU 95H98459),34-440 (88J00000),34-440 (95H98460 & HIGHER),34-440 (SN88J00001 THRU 90C12579)
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 34-895,422-04-004-0001,50-864,34-928
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
  • This miter gauge assembly (part number 34-929) is for table saws
  • The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included
Rank No. #19
Kreg PRS7850 Precision Router Table Stop
  • Magnified lens cursor makes adjustments clear, accurate and precise.
  • Easy to assemble and adjust.
  • The design allows you to easily lift the stop out of the way when not needed.
  • Works with the Kreg precision router table fence only. (special adaptor kit available for use with precision benchtop router table)
Rank No. #20
O'skool 18 Inch(457mm) Miter Gauge Fence system
  • Designed to be universal, it will fit most bench tools with any standard 3/4" x 3/8"(19 x 9.5mm) track with a 1/8”(3.175mm) “T” slot . The slide bar has a locking washer fit into to the “T” slot to prevent accidental lifting when feeding your stock through,If your saw does not have a “T” slot, you can remove the locking washer.
  • 18"(457mm) long aluminium fence complete with flip-up length stop.
  • The steel miter bar is equipped four sprung loaded ball bearings on the side of the bar ,the sprung loaded ball bearings ,the bearings can be adjusted with the provide hex key wrench in or out to keep the bar snug in the track.
  • Ideal for cross-cutting wood at a specific angle, zeroed at a 90 degree, it allows the wood to be cut at any angle between 0 and 90 degrees(0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°).
  • Improve safety and accuracy on the table saw and the router table.

Last update on 2020-10-08 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Miter Gauge For Kreg Router Table for our consumer to review. The reports above show ratings of the best overal, best cheap Miter Gauge For Kreg Router Table to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.