The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Magnetic Drill Press Harbor Freight of 2020 – Consumer Guide & Reviews

Rank No. #1
Yost 5 in. Heavy Duty Drill Press Vise
  • 5" Jaw Width
  • 5" Jaw Opening
  • 2" Throat Depth
  • V Groove Stationary Jaw for gripping Circular Stock
  • Oversized Main Handle for Additional Torque
Rank No. #2
WEN 4208 8 in. 5-Speed Drill Press
  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
  • Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
  • Durable 1/3 HP induction motor develops ample torque and power
  • 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
Rank No. #3
DEWALT Drill Press, 2-Speed, Magnetic, 2-Inch (DWE1622K)
  • 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm
  • Overload protection electronics which prevent motor damage
  • Quick Change chuck system. Drillpoint Pressure @ 1/2" Steel Plate (12mm) : 741 pounds
  • Magnetic coolant bottle can be placed on either side of tool or on a work surface
  • 4-3/8 inch Drill travel offers maximum capacity for heavy duty applications
Rank No. #4
JIANGSU JINFEIDA POWER TOOLS ZJ4116QC 10-Inch Drill Press
  • Drill Press With Laser
  • This product is highly durable
  • This product is made in China
  • 10" drill press
  • Has a laser for accuracy and a front switch for better operation
Rank No. #5
Grizzly G7943 12 Speed Heavy-Duty Bench-Top Drill Press
  • All the features and dependability of an expensive industrial grade drill press—with a price tag that's astoundingly low
  • Includes built-in light
  • Specifications: • Motor: 3/4 HP 110V single-phase • Swing: 14-Inch • Drill chuck: 1/64-Inch–5/8-Inch
Rank No. #6
Hougen HMD130 Ultra Low Profile lightweight right angle drill with large capacity. Replaces HMD115 and HMD150
  • The HMD130 weighs just 23.8 lbs and has an electric rating of 115V, 50/60 Hz and 9-Amps. The motor operates from any standard 115/120 volt power source and develops 450 no-load rpm's. Patented quill feed arbor for smooth cuts and minimal maintenance, Uses RotaLoc Plus annular cutters which requires no tools for installation or removal
  • Positive slug ejection, High torque gearing, Lift detector safety system, Feed handle switches easily from side to side
  • Ratchet can be used in place of feed handle, Rear mounted controls, Replaces of the HMD115 and HMD150
  • Carrying handle, Carrying Case included, One year warranty - MADE IN USA
Rank No. #7
HHIP 3900-0183 Pro-Series High Grade Iron Quick Slide Drill Press Vise, 3" Width x 1.25" Depth Jaw, 3.5" Jaw Opening (Pack of 1)
  • Pro-series quick slide drill press vise
  • Made of high grade strong stress relieved iron casting
  • Precision ground
  • 3.5-inches jaw opening
  • Jaw measures 3-inches width by 1.25-inches depth
SaleRank No. #8
Lisle 12060 Large Magnetic Chuck Key
  • Tool has strong neodymium magnets for attachment close to the worksite or toolbox
  • The 4 differenet chuck key sizes cover some of the most popular chucks available
Rank No. #9
Mophorn 980W Magnetic Drill Press with 1-1/3 Inch (35mm) Boring Diameter Magnetic Drill Press Machine 2700 LBS Magnetic Force Magnetic Drilling System 680 RPM Portable Electric Magnetic Drill Press
  • 【EASY USAGE】- Magnetic drilling press rack and pinion gear system for exact drilling depth.
  • 【MOTOR POWER:980W】- Strong power magnetic drilling system motor: 980 W, 110 V, 50 Hz.
  • 【HIGH PERFORMANCE】- Maximum Boring Depth: 2 in.(50mm); Maximum Boring Diameter: 1.37 in. (35 mm).
  • 【HIGH COMPATIBILITY】- Max Magnetic Force: 10,000 N(2250Lbs); tool Holder: 3/4-inch weldon shank;spindle Speed: 680 RPM.
  • 【WIDELY USED】- Suitable for steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, drilling rig, electric power construction, railway manufacturing and other fields.
SaleRank No. #10
Milescraft 1318 Drillmate Drill Guide with chuck
  • Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
  • Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
  • Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
  • Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
  • Adjustable depth stop and spring action control of the head
SaleRank No. #11
Hougen HMD904 115-Volt Magnetic Drill
  • Large 1-1/2" x 2" capacity, The Drill of Choice for Fabrication
  • Lightweight, Powerful and Versatile, Hidden motor cord , Ergonomic housing
  • Increased Safety with Less Maintenance, Lower Overall Height, Lift Detector Safety System
  • LED Pilot Light for Low Light Conditions and Greater Hole Accuracy
  • Slot Drive Arbor for More Accuracy and Quicker Change Out of Accessories
Rank No. #12
WEN 4210 Drill Press with Laser, 10-Inch
  • Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
  • Adjust between five speeds from 600 to 3100 RPM
  • Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
  • Durable 3.2-amp motor provides ample torque and power
  • 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right
Rank No. #13
Genesis GDP1005A 10" 5-Speed 4.1 Amp Drill Press with 5/8" Chuck, Integrated LED Work Light, and Table that Rotates 360° and Tilts 0-45°
  • 4.1 amp induction motor for quiet, smooth performance
  • 5 speed gear box
  • 5/8" chuck handles larger bits
  • Table rotates 360° and tilts 0-45°
  • Easy to use Rack-and-pinion table height adjustment
Rank No. #14
SKIL 3320-01 3.2 Amp 10-Inch Drill Press
  • 1/2-inch keyed chuck. Bump-off switch for added safety
  • 5 speeds - 570 - 3,050 RPM
  • Adjustable depth stop for accurate measurements and repetitive drilling
  • 0-45 degree left/right tilting work surface
  • Laser X2 2-beam laser for precise hole alignment
Rank No. #15
BLACK BLUEROCK Tools Model BRM-35A Typhoon Magnetic Drill Roto-Broach
  • Drilling Capacity: 7/16"-1 1/2" - 2" depth
  • Comes with Free Chuck, Adapter, Oil Bottle, Safety Chain and Case
  • 120V, 60Hz, 595 RPM
  • Uses Standard 3/4" Weldon Shank
  • BLUEROCK Tools Brand
Rank No. #16
Accusize Industrial Tools Magnetic Drill Annular Cutter Arbor Mt4 to 3/4'' Weldon Shank, Mc00-0004
  • MT4 to 3/4'' Weldon Shank
  • With Key
  • For Drill Use Annular Cutter s on Drill Press
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shank
  • MC00-0004
Rank No. #17
Hougen HMD904 115 Volt Magnetic Drill With Coolant Bottle Plus 1/2" Drill Chuck, Adapter and 12002 Rotabroach Cutter Kit
  • The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more features.
  • Large 7/16"-1-1/2" dia. / 2" D.O.C. Capacity and a 450 RPM motor. New - pilot light for low light or no light conditions, New - two stage magnet 30% power increase when motor is turned on.
  • New - slot drive arbor for more accuracy and quicker change out of accessories, New - housing - stronger stiffer, more ergonomic, positive slug ejection.
  • Feed handles quickly change from side to side, lift detector safety system, rear mounted controls, gravity feed coolant system (hmd904 w/ coolant bottle) Made in U.S. A. One year warranty
  • Fabricators kit includes HMD904 w/coolant bottle plus 1/2" drill chuck, adapter and 12002 Rotabroach cutter kit.
Rank No. #18
Steel Dragon Tools MD25 Magnetic Drill Press with MT3 Spindle Taper and 13 Piece 2in. Cut Depth Annular Cutter Kit
  • Suitable for drilling on any metal surface.
  • Motor: High-Speed, Induction, 1,350 W, 110 V, 60 Hz
  • MT3 Spindle Taper. Includes MT3 to MT2 spindle adapter.
  • Kit includes 11 high speed steel annular cutters and two (2) pilot pins.
  • Bits: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., 3/4 in., 13/16 in., 7/8 in., 15/16 in., 1 in.
Rank No. #19
Metal Cutting Engraving Machine Mist Cool Coolant Lubrication Spray System for Air Pipe CNC Lathe Milling Drill for Cooling Sprayer Machine
  • 1. Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled
  • 2. Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up
  • 3. The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
  • 4. Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
  • 5. Not only increases the machining cutting speed, save time and reduce processing costs and tool wear
Rank No. #20
Wixey Model WL133 Drill Press Laser
  • Thin and precise easy to adjust cross-hairs & Mounts quickly to any drill press
  • It is a class 3a Laser with output less than 2.5MW.
  • Cross-hairs stay on center at any table or work piece height.
  • Rugged steel construction It is a class 3a with output less than 2.5MW.
  • Uses 2 AA batteries (not included)

Last update on 2020-11-16 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Magnetic Drill Press Harbor Freight for our consumer to review. The reports above show ratings of the best overal, best cheap Magnetic Drill Press Harbor Freight to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.