The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Light Bar 3Rd Gen 4Runner of 2020 – Consumer Guide & Reviews

Rank No. #1
iJDMTOY Smoked Dark Lens 9-LED 3rd Brake Light Assy Compatible with Toyota 4Runner Highlander Prius Sienna etc, Rear Center Roof High Mount LED Third Brake w/Strobe Braking Feature
  • Compatible with 2010-2020 Toyota 4Runner, 2014-2019 Toyota Highlander, 2010-2015 Toyota Prius, 2012-2018 Toyota Prius C, 2012-2018 Toyota Prius V and 2011-2020 Toyota Sienna
  • JDM smoked lens with nice purplish tint, powered by 9 pieces brilliant red SMD LED diodes with strobe flash warning feature for brake
  • Direct replace the OEM 4-LED only clear 3rd brake lamp (OEM 81570-47051 8157047051)
  • Direct plug-N-play for the 3rd brake light feature (also comes with an optional wire to enable rear fog or tail running light feature, if you choose not to use it, simply not connect this wire at all)
  • This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Rank No. #2
GS Power Engine Hood Hinge Ditch LED Mount Brackets for Auxiliary Offroad Pod Work Light. Fit Cowl Panel at Windshield Base Compatible with 2005-2015 Toyota Tacoma
  • Compatible with All 2005 - 2015 Toyota Tacoma
  • No drilling needed. Requires only a wrench or socket for installation
  • Sold as a pair (Driver & Passenger side). May be used for CB Antenna or Whip Flag
  • For 3rd Gen 2016-Present Tacoma Brackets, Visit www.amazon.com/gspower
Rank No. #3
GS Power 52 inch Curved LED Bar Light Mount Brackets. Mounts Off Road Auxiliary Lightbar at Roof Cab Upper Windshield | Compatible with 2004 – 2018 Ford F150 & SVT Raptor
  • Designed for 52"Curved LED Light Bar
  • Compatible with: 2004-2018 Ford F150 & SVT Raptor
  • Package includes: One Pair of Brackets, 2x Gaskets, Mounting Hardware, Instruction Manual
  • NOT Compatible with Ford SuperDuty F250/350/450
Rank No. #4
GS Power 52 inch Curved LED Light Bar Mount Brackets for Mounting Off-Road Auxiliary Work Lights at Roof Cab Upper Windshield. Compatible with 2005-2020 Toyota Tacoma
  • Designed for 52" Curved light bar. Can also fit 50" curved light bar by mounting further back from the front windshield
  • Compatible With 2nd & 3rd Generation Toyota Tacoma 2005-2020
  • Kit includes: 2x Mounting Brackets, 2x Gaskets, Mounting Hardware, Instruction Manual
  • Note: Provided rivets are intentionally larger than the pre-drilled holes on the brackets. During installation, drill through the brackets and vehicle frame together with 3/16" drill bit, and then fasten with the provided rivets
  • Windnoise is an universal problem for all light bars due to their cooling fin/blades. Simple solution are widely available online to reduce or eliminate this noise
Rank No. #5
XJMOTO Upper Hood Ditch Side Pillar Work Led Light Pod Mount Bracket Compatible with 1995-2004 Toyota Tacoma
  • Fitments:1995-2004 Toyota Tacoma.Compatible with led pod,small light.
  • Made with precision laser cut steel, pressed and formed,rust-resisting,long service life.
  • Provided installation hardware ensures secure mounting of the LED light to your vehicle.
  • Easy to install on hood hinge,No cutting and drilling need.
  • Package Include:one paif of upper hood mount bracket.
Rank No. #6
Dasen Lower Hidden Bumper Grille Mount Brackets Compatible with 32 Inch LED Light Bar Compatible with 2016-2019 Tacoma Pickup 2WD/4WD
  • Fit 2016 2017 2018 2019 Tacoma.
  • Material: Steel w/ black coating.
  • Professional installation is highly recommended.Front bumper trimming and minor drilling is required for some models during installation.
  • Package Included: A pair light bar hidden bumper Mounting bracket,Bolts included.
  • Notice: Hidden bumper mount brackets only,LED light bar not included.Pictures with light bar for reference only.
Rank No. #7
Rough Country 30" LED Bumper Mounting Kit (fits) 2016-2020 Tacoma | (1) 30" Light Bar | 70621
  • LED Bumper Mounting solution allows you to easily install a 30" LED Light Bar in the Factory Bumper.
  • Easy at Home, Bolt On Installation supported by RC.
  • LEDs are IP67 Waterproof Rated and made with Durable die cast aluminum housing.
  • Powerful 12,000 Lumen, 150 Watt output, these LED lights pack a huge punch.
  • Backed by Rough Country for 3 Years.
Rank No. #8
iJDMTOY 3pc Set Dark Smoked Lens Full LED Strip Front Grille Lighting Kit Compatible With 2014-up Toyota 4Runner, Includes (3) 24-SMD 2500K Amber LED Assy & Wiring Harness
  • Compatible with 2014-up Toyota 4Runner (N280)
  • Complete Raptor style grille light kit comes with 3 pieces 2500K amber yellow LED grille mounting light assemblies with dark smoked lens
  • Unlike the cheap ones on the market with only 8 LED diodes, our 4Runner LED grille lamp is powered by 24 pieces LED diodes to form a perfect light strip with 3 times brighter lighting output
  • For 4Runner w/ TRD Pro grille, install the 3 pieces LED marker lights above the lettering emblem; For the regular grille, install just 2 pieces LED marker lights on the sides of the round emblem or 3 pieces fit below the emblem section
  • This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Rank No. #9
LED Pod Hood Mount Brackets compatible with Toyota Tacoma 2016+
  • Easy installation
  • Powder coated with a tuff black semi-gloss mini texture
  • Works with just about any LED light pod available
  • Mounting systems engineered and manufactured in the USA
Rank No. #10
Supreme Suspensions - Sway Bar Brackets For 2005-2020 Tacoma 2003-2009 4Runner and 2007-2009 FJ Cruiser 2WD 4WD High-Density Delrin Sway Bar Drop Brackets (Silver)
  • COMPATIBLE WITH 2005-2020 Tacoma (2WD 4WD), 2003-2009 4Runner (2WD 4WD) and 2007-2009 FJ Cruiser (2WD 4WD). Will NOT fit Tacoma 5-Lug models and 4Runner models with KDSS (Kinetic Dynamic Suspension System).
  • CONTENTS: 2x T6 Billet Aluminum Sway Bar Drop Brackets, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • DETAILS: Lift your vehicle up to 1″-3″ without worrying about your sway bar coming into contact with your coil spring or shock while you’re going offroad.
  • INSTALLATION: Easy installation takes 1 - 2 hours.
  • BENEFITS: Stabilizes the bar angle and function of your truck giving you the best in ride security. By adding our sway bar brackets, the mounting base of the sway bar is lowed and positioned back slightly improving driveline misalignment and decreases body roll. This simple addition increases the sway bars range of motion keeping your truck and its suspension handling the way it should.
Rank No. #11
Upper Hood Ditch Side Pillar LED Light Pod Mount Bracket Compatible with 1989-1995 4Runner
  • Fitments: 1989-1995 Toyota 4Runner,3rd Gen Pickup.
  • Made with precision laser cut steel, pressed and formed,rust-resisting,long service life.
  • Provided installation hardware ensures secure mounting of the LED light to your vehicle.
  • Easy to install on hood hinge,No cutting and drilling need.
  • Package Include:one pair of upper hood mount bracket.
Rank No. #12
GreatUs LED Light Pod Metal Hood Mount Bracket Kit/Ditch Hood Light Brackets Compatible with 2016-2017 Toyota Tacoma - Black.
  • Allows you to mount the hood on the corner of the hood without affecting the opening or closing of the hood
  • Beautiful appearance,low profile design.
  • Easy to install, basic hand tool installation time: less than 1 hour (simple).
  • Designed to ride at night or even on the road behind to improve safety.
Rank No. #13
Nilight LED Light Bar Wiring Harness Kit REAR LIGHTS 12V 5Pin Rocker Switch Laser On off Waterproof Switch Power Relay Blade Fuse-2 Lead,2 Years Warranty
  • Two Available Leads: 12 feet extendable wiring harness, two sets of light output connectors for dual light fixtures less than 180W.
  • Efficient Protection: Power relay and inline blade fuse act as the first line of defense against overcurrent and short circuit.
  • Shining in the Dark: Built-in two premium LEDs emit soft light to illuminate the patterns, easy for you to find the switch in the dark.
  • Wide Application: Suitable for almost all 12V battery vehicles, such as Jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers.
  • Package Include: 1 x Wiring Harness Kit, 1 x 5 Pin LED Rocker Switch, 1 x Instructions
Rank No. #14
Hood Ditch Light Mount Bracket Kit Apoc Industries
  • Proudly Manufactured and designed in America - 100% USA Made
  • Fitment: 1989-94 Toyota pickup
  • Ditch light mount using existing fender bolts to mount to making install a breeze.
  • Designed to fit LED Cubes or other small lights.
  • Give your Toyota pickup a aggressive look and extra light with these simple to install mounts.
Rank No. #15
6KLED BK90020 offroad LED Ditch Lights Bracket Fit Tacoma 2016 2017 2018 2019 trucks Flood Spot cube
  • ✔️ Fit TACOMA 2016 2017 2018 2019 Varius LED work lights spot or flood
  • ✔️ DESIGNED To fit Tacoma pickup Trucks without any modifcation, Best Tacoma accessories for LED offroad driving lights cube pod
  • ✔️ SOLD AS PAIR FOR THIS TRUCK, MADE IN USA
  • ✔️ LIFETIME WARRANTY all our offroad UTV ATV Brackets & Accessories for all your LED lights needs
Rank No. #16
MNJ Motor White LED Light BAR Symbol Push Switch with Connector Wire Kit Replacement for Toyota (Surface Size 1.54 x 0.83 inches)
  • ★ PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
  • ★ SUPREME QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • ★ STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • ★ EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • ★ WIDE APPLICATION - The switch fits on most model Toyota's vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE VEHICLES: # Toyota FJ Cruiser 2007-2015, #Toyota Fortuner 2005-2014, # Toyota Hilux 2005-2014, # Toyota Tacoma 2005-2011, # Toyota Tacoma 2012-2015 (Left Side ONLY), # Toyota Highlander 2001-2007, # Toyota Tundra 2005-2006 (Center Console if equipped), # Toyota 4Runner 2003-2009, # Toyota Prado 120 Series 2003-2009
Rank No. #17
MNJ Motor Blue LED Light BAR Symbol Push Switch with Connector Wire Kit Replacement for Toyota (Surface Size 1.54 x 0.83 inches)
  • ★ PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
  • ★ SUPREME QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • ★ STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • ★ EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • ★ WIDE APPLICATION - The switch fits on most model Toyota's vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE VEHICLES: # Toyota FJ Cruiser 2007-2015, #Toyota Fortuner 2005-2014, # Toyota Hilux 2005-2014, # Toyota Tacoma 2005-2011, # Toyota Tacoma 2012-2015 (Left Side ONLY), # Toyota Highlander 2001-2007, # Toyota Tundra 2005-2006 (Center Console if equipped), # Toyota 4Runner 2003-2009, # Toyota Prado 120 Series 2003-2009
Rank No. #18
CH4X4 Push Switch for Toyota Tacoma 3rd Gen - Bumper Light Bar Symbol - Blue LED
  • Single Pole Single Throw ON-OFF switch.
  • The product is manufactured to fit in the OEM space available in your car or truck, simple to install.
  • Black hard surface rocker.
  • Laser etched Legend. Single upper L.E.D light. Single lower L.E.D light. Upper light is ON when the switch is pressed IN.
  • Lower light can be wired to separate dash light circuit. Rated at 3 Amp 12V. Wiring diagram supplied with switch
Rank No. #19
CH4X4 Push Switch for Toyota Tacoma 3rd Gen - Led Light Bar Symbol 2 - Blue LED
  • Single Pole Single Throw ON-OFF Push switch.
  • The product is manufactured to fit in the OEM space available in your car or truck, simple to install.
  • Black hard surface rocker.
  • Laser etched Legend. Single upper L.E.D light. Single lower L.E.D light. Upper light is ON when the switch is pressed IN.
  • Lower light can be wired to separate dash light circuit. Rated at 3 Amp 12V. Wiring diagram supplied with switch
Rank No. #20
MICTUNING Backlit Led Light Bar Symbol Push Button with Wiring Kit On-off Switch Replacement for Toyota (White, Surface Size 1.54 x 0.83 inches) - M0810-T-LLBW
  • PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car. Gives your vehicle upgraded with this factory look switch.
  • HIGH QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
  • STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
  • EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay; the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
  • WIDE APPLICATION - The switch compatible with most model Toyota's vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE With: # Toyota FJ Cruiser 2007-2015, #Toyota Fortuner 2005-2014, # Toyota Hilux 2005-2014, # Toyota Tacoma 2005-2011, # Toyota Tacoma 2012-2015 (Left Side ONLY), # Toyota Highlander 2001-2007, # Toyota Tundra 2005-2006 (Center Console if equipped), # Toyota 4Runner 2003-2009, # Toyota Prado 120 Series 2003-2009

Last update on 2020-10-17 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Light Bar 3Rd Gen 4Runner for our consumer to review. The reports above show ratings of the best overal, best cheap Light Bar 3Rd Gen 4Runner to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.