The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Leer Tonneau Cover Replacement Parts of 2020 – Consumer Guide & Reviews

Rank No. #1
C1608055 19.7 inch 120Lbs Shock Struts for are Leer Truck Bed Tonneau Cover RV Bed Lift Camper Shell, Shed Window Floor Hatch Door, and Other DIY Applications, Set of 2 Vepagoo.
  • 🟢[APPLICATION] 20in 120lb per gas shock compatible with queen bed oversize mattress, ARE Leer truck pickup bed tonneau Cover, camper bed, travel trailer bed, murphy bed, shed window, and other heavy-duty DIY appliacation.
  • 🟢[PARAMETER] Interchange Part Number C16-08055 C1608055. Extended Length:19.69", compressed Length: 12.20"; End Fittings:10mm Nylon Ball Sockets. Mounting bracket needed (Not INCLUDED ): 10mm Ball Stud Mounting Bracket.
  • 🟢[NEED KNOW] If you used these gas shocks as a replacement for the Truck Tonneau Cover or Trailer cover, you have to compare the length of your original gas spring' compression and extension, type of connector, and lift capability before purchasing.
  • 🟢[TIPS] 120lb Per strut, two are 240lb. Super strong!! You couldn’t compress it by your hand! Suitable for lids or doors weighing between 100b and 150lb. Don't buy for a lightweight project less than 80LB. If you think these 120lb gas shocks are too STRONG or too HEAVY for your PROJECT, please contact us for a more suitable one.
  • 🟢[12+1 MONTH REPLACEMENT SERVICE] Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
SaleRank No. #2
C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)
  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds;
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!
Rank No. #3
Maxpow C16-08260 19.7inch 60 lbs Gas Prop/Strut Lift Support Camper Shell Cap Topper Snugtop Tonneau Leer Cover (Please Check the Extended Compressed Length and Force before you bought it)
  • Qty: 2pcs; Placement: Lift Supports (Please confirm the Extended Compressed Length are compatible with your vehicles)
  • Fits Universal; Interchange Part Number: C16-08260, 4450, 4450S10, C1608260
  • Extended Length: 19.69 inches, Compressed Length: 12.20 inch; Force 60 lbs(267N) Per Prop/Strut, Force 120 lbs Per Pair; Shaft Connection: Ball Socket U Band (Nylon)=10mm=3/8"=0.39", Body Connection: Ball Socket U Band (Nylon)=10mm=3/8"=0.39"
  • Exact fit and easy to install with simple hand tools in just minutes
  • Attention: Before purchasing please confirm that our product size and appearance are consistent with yours.
Rank No. #4
A PAIR(2) Leer Truck Tonneau cover gas strut spring lift 20" extended length x 11.625 " compressed length x 135 LB Pressure
  • Extended Length: 20" (center to center of ball socket ends)
  • Compressed Length: 11.625"
  • Force: 135 pounds of pressure (Per Prop)
  • End Fitting: 10mm Ball Socket and 10mm Ball Socket
  • Set of Two
Rank No. #5
2 Pieces (Set) Tuff Support Camper Shell Cap Topper Snugtop Tonneau Leer Cover Lift Supports 26 Inches 85 Lbs. Repl- C16-24797
  • Replacement for C16-24797
  • Extended Length: 26.34 in--Compressed Length: 15.71 in
  • In Original Tuff Support Packaging With Lifetime Limited Warranty*
  • Instructions Available When Needed for Easy and Safe Installation
SaleRank No. #6
Gordon Glass Co. Truck Cap Locking Twist Handle with Cover
  • Clockwise Twist Handle
  • Includes spur washer, nut and cam
  • Handle: 3.625"x 1.875"
  • Threaded base: 3/4"L x 1"W x 1/2" threaded shank
  • One handle comes with two keys
Rank No. #7
2 Truck Upfitters 20" Gas Props for ARE Pickup Truck Bed Tonneau Covers (19.7" extended, 11.8" compressed, 110 pounds of pressure each) MEASUREMENT REQUIRED! Incl 4 ball mounts and nuts!
  • CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL ARE TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!
  • Truck Upfitters Pair (2 total) of 110 pound (each) gas struts. 19.7" extended length and 11.8" compressed length. Most commonly used for ARE brand and ARE style Tonneau covers with lift assist arms. Fits other similar brand of fiberglass tonneau covers /truck lids, but measurement is required to ensure fit.
  • These do not fit all fiberglass tonneau models. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement.
  • Comes with four threaded 10mm ball mounts and nuts for alternate 'other than tonneau cover' applications. Equivalent to Suspa #C16-17796. Prime! Free Shipping! In Stock!
  • Fits most ARE Shortbed and Longbed (5.5-8.0') Truck Tonneau Covers with Lift Assist Arms.
Rank No. #8
Mounting Clamps Truck Caps Camper Shell for Chevy Silverado Sierra 1500 2500 3500,Dodge Dakota Ram 1500 2500 3500,F150 F250,Titan,Tundra 4 PCS
  • MATERIAL:Made of aluminum,high quality and strength,hard to be corroded.
  • FITMENT:CHEVY:Silverado/Sierra 1500,2500,3500.Silverado/Sierra 07 with Cargo Rail. DODGE:Dakota.Ram 1500,2500,3500.F150 F250.MITSUBISHI:Raider.Titan.Tundra.
  • FUNCTION:Designed to mount truck caps on many pick-up truck models.
  • PACKAGE:Set of 4 black clamps.
  • BENEFITS:Stay tight all the time.Fit firmly to your truck and cap/lid.No drilling required.
SaleRank No. #9
ESI Ultimate Tailgate Seal with Taper Seal 10ft for use with Truck Caps and Tonneau Covers
  • The Original and Patented Tailgate Seal keeps out dust, fumes and water that enters in through the tailgate gap and sidewalls, when using a truck bed cap or tonneau cover. MADE IN USA
  • 10ft of automotive grade, EPDM rubber with 3M ST1200 tape
  • Not compatible with: 2020 & newer Silverado and Sierra 1500 (purchase ASIN: B08R7NNV2B), 2020 & newer Silverado and Sierra 2500 and 3500 (purchase ASIN: Available Soon), 2015 & newer Colorado and Canyon (purchase ASIN: B08WDQN5CB), Ford Ranger 2019 & newer (purchase ASIN: B07YF5BL8M), GMC Sierra with MultiPro Tailgate (purchase ASIN: B085896S8R), Nissan Titan (Available Soon) , RAM with RamBox (purchase ASIN: B08L21DGNB), RAM with Multifunction Tailgate (purchase ASIN: B08NTZYDN9)
  • Adheres to all surface finishes including spray on bed liners. Reduces tailgate vibration.
Rank No. #10
Truck Cap Locking T-Handle - Clockwise
  • Clockwise T-Handle
  • Black powder coated finish
  • Rotation: 90 degree clockwise; Shaft 5/16" square, 1-7/8" long
  • Mounting: Blind 1-1/2cc with 3/8" Lugs, Tapped 10-24 x 3/8"
  • Package: one t-handle and two keys.
Rank No. #11
Bauer Matching Set T-Handles Lock
  • Bauer T handle combo pack
Rank No. #13
ESI Premium Cap Seal XL 20 FT (2" Width x .200" Height x 20' Length) EPDM Rubber for Caps 200 lbs or Less
  • 20ft seal for mounting truck caps or camper shells that weigh 200 lbs or less. For 8 ft beds purchase ASIN: B00NCCX6C2
  • Fills small to medium bed rail gaps. Complete kit includes seal, butyl tape, alcohol pads and detailed instructions.
  • High quality, long-lasting automotive grade, 18 PCF density EPDM rubber. Preferred by professional installers over PVC/foam seals.
  • Excellent compression set resistance for maximum service life and vibration absorption
  • No need to replace this seal every time your cap is removed.
SaleRank No. #14
2 Truck Upfitters Gas Props for Undercover Tonneau Covers ONLY. 27.5" extended and 15.6" compressed length (measured from center of ball mounts), 38 pounds of pressure ea. Incl 4 ball mounts!
  • Truck Upfitters Pair of 38 pound gas struts. 27.5" extended length and 15.6" compressed length (measured from center of each ball mount). 29" overall extended length (measured from tip to tip).
  • PLEASE CHECK MEASUREMENTS BEFORE ORDER. THESE DO NOT FIT FIBERGLASS TONNEAUS. Measure your strut from center of socket to center of socket when fully opened and fully closed to get accurate measurement. Please see second picture for part dimension and details. Small flat screwdriver required for removal and re-installation.
  • Comes with four 10mm ball mounts for alternate 'other than camper shell' applications.
  • Equivalent to # GPSt270P or Stabilus # 0518. Fits all SE/Classic/Elite Undercovers except for Ford Sporttrac Undercover. Will NOT fit fiberglass / painted to match lids and tonneau covers..
  • Prime! Free Shipping! In Stock!
Rank No. #15
Papillon Adhesive Universal Rubber Truck Bed Tailgate Gap Cover Filler Seal Shield Lip Weather Stripping Cap Seal Kit(4.25" × 11′ Black)
  • 【Saving Materia】The tailgate gap cover saves you time and money by keeping loose materials like mulch and rock from falling through the gap between the tailgate, and the bed of your truck. When used with a tonneau cover, gapshield also acts as a partial tailgate seal that reduces the amount of dust in the truck bed.
  • 【Protect Your Truck】Prevents rocks from falling onto the bumper step pad, and damaging the underside of the tailgate. This is an easy solution to these common problems.
  • 【Durable Elastomeric Material】The durable elastomeric material easily flexes along its entire length, so it won't interfere with closing the tailgate, yet is in place when you need it to help secure your load from falling through the tailgate gap when travelling or when you drop your tailgate for unloading. The tailgate gap cover can also be easily tucked in to the gap, getting it out of the way of any other use of your truck bed without interfering with closing the tailgate.
  • 【Easy-installed tool】Direct replacement tape, you just need to push the stripping foam on the rubber sealant above the installed place.
  • 【Sufficient Length】The length of 11' is enough for you to use on two pickup trucks.Made from durable all-season elastomer and automotive grade high strength tape.Designed to help get the most out of your vehicle.
Rank No. #16
28" 200 Lbs/889 N Gas Shock Strut Spring for Heavy Duty Trailer Cap Tonneau Cover Lift Supports, Set of 2 Vepagoo.
  • 【PLACMENT】Most Used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper shell, truck canopy, trap door, trailer door, trash bin, and other custom Medium or Heavy equipment. Medium or Heavy Equipment.
  • 【INTERCHANGE NUMBER】100-175,100-200,12161,3100175,3100200,3100-200,8195618,AVM100-175,AVM100-200,AVM100-200ME,GS3100200,SE1000200ME,SE1000-200ME,SPD3100200,SPD-3100-200,ST280M200.
  • 【TIP】Please measure the length from the center of the socket to the center of the socket before purchasing.
  • 【SUPPER STRONG】 200lb/898N per shock, two are 400lb/1796N. Super Strong and stiff, you couldn't compress them by your hand!!
  • 【12+1 MONTH REPLACEMENT】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
Rank No. #17
LEER HF650M | Fits 2015+ Ford F-150 with 5.6 FT Bed | Hard, Quad-Folding, Low Profile Tonneau Cover | SKU 650112
  • FITS PERFECT/EASY TO LATCH – LEER’s industry exclusive CYNC latching system allows easily opening the cover with two fingers from either side of the truck bed. Latches with open or closed tailgate.
  • SLEEK LOOK – The patented HF650M Hard Folding Cover has a sleek, 12MM low-profile design with thinner rails, allowing for a true flush mount and more cargo space inside the bed.
  • FOUR LIGHTWEIGHT PANELS - The HF650M offers ultimate flexibility with four lightweight, durable, dent-resistant panels made of fiberglass reinforced plastic polymer. When opened, the quad-fold design keeps the third brake light and window visible and protects the back of your cab and window by locking into position away from the cab. 450 lbs. evenly distrusted load rating.
  • NO-DRILL INSTALLATION – With an easy and fast installation process, the HF650M comes with the tools and instructions to install your tonneau. This allows you the ability to easily take your cover off or put it back on.
  • THREE YEAR LIMITED WARRANTY - The HF650M from LEER comes with a 3-Year Limited Warranty. Warranty is valid only on products that are sold and/or shipped by Leer Tonneau Covers.
SaleRank No. #18
Y-autopart Mounting Clamps Truck Caps Camper Shell Powder-Coated Replacement for Chevy Silverado Sierra 1500 2500 3500,Dodge Dakota Ram 1500 2500 3500,F150 F250,Tundra Set of 6 (Black)
  • MATERIAL:Made of aluminum,high quality and strength,hard to be corroded.
  • FITMENT:CHEVY:Silverado/ Sierra 1500,2500, 3500.Silverado/Sierra 07 with Cargo Rail.DODGE:Dakota.Ram 1500,2500,3500.F150 F252.MITSUBISHI:Raider.TOYOTA:Tundra.
  • FUNCTION:Designed to mount truck caps on many pick-up truck models.
  • PACKAGE:Set of 6 black clamps.
  • BENEFITS:Stay tight all the time.Fit firmly to your truck and cap/lid.No drilling required.
Rank No. #19
LEER ROLLITUP | Fits 2019+ Chevy Silverado/GMC Sierra with 5.8' Bed | Soft Roll Up Truck Bed Tonneau Cover | 4R300 | Low-Profile, Sturdy, & Easy 15-Minute Install (Black)
  • FITS PERFECT/EASY TO LATCH – Our ROLLITUP Tonneau cover has an easy to latch mechanism that closes at the end of the tailgate. The ROLLITUP fits perfectly on your truck bed rails! Each cover also has an adjustable tension system, keeping your ROLLITUP tonneau tight and wrinkle-free in any weather condition. Please check your specific vehicle with Amazon's Garage fitment.
  • BUILT TO LAST – Our cover is made out of heavy-duty – 24 ounce tear-resistant, marine-grade vinyl, with built-in crossbars that offer support when the cover is lying flat. Our side rails and clamps are made of 6063 aluminum, which is corrosion-resistant.
  • 100 PERCENT BED ACCESS – When you’re ready to access your bed, the ROLLITUP allows you the ability to have full access to your bed, without the removal of your tonneau. Each ROLLITUP cover uses Velcro Brand hook & loop strip on the sides, opening and closing your cover is easy!
  • NO-DRILL INSTALLATION – With an easy and fast installation process, our ROLLITUP comes with the tools and instructions to install your tonneau in minutes.
  • LEER LIFETIME WARRANTY – When you buy a LEER product, you’re simply buying the best. We back our products with a Limited Lifetime Warranty.
Rank No. #20
Hatchlift ENDF-10-QREL 10mm Quick Release End-Fitting
  • For 10mm Gas Springs with M6x1 Thread
  • Disconnectable by the Quick Release Lever
  • Can be used with RV's, Boats, Home, and Auto

Last update on 2021-07-26 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Leer Tonneau Cover Replacement Parts for our consumer to review. The reports above show ratings of the best overal, best cheap Leer Tonneau Cover Replacement Parts to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.