The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Large Diameter Pipe Clamps of 2020 – Consumer Guide & Reviews

Rank No. #1
Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack of 5 Sets)
  • Bolt these around any duct and attach a piece of metal conduit with flattened and
  • Drilled ends (not included) for additional support from a wall or ceiling
  • Please note:some customers reflect that the size of the pipe cramp is small, actually the size of the pipe cramp smaller little bit is better for fasten the pipe to the wall. When installing the pipe cramp, pls rotate the screw hard to make the screw hole close to the wall so that the pipe cramp can fasten the pipe to the wall better.
Rank No. #2
GLIDESTORE 10-Inch Hose Clamps Stainless Steel (Adjustable 9.7 Inch – 10.6 Inch Diameter), Duct Clamps, Dryer Vent Hose Clamp, Pipe Clamp, Worm Gear Clamps, Large Hose Clamps (Pack of 8)
  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with 10 hose clamp, drop us a message and we are certain to give you a full refund.
  • ✔ HIGH-END MATERIAL: Hose clamps stainless steel made of Stainless steel (including the band, housing and screw), constructed to resist scaling and corrosion and ensure long- term use.
  • ✔ AMAZING FUNCTION: These dryer vent hose clamp 10 Inch are used to lock the hose tightly with a view to preventing flow leakage. This dryer vent hose clamp 10 Inch can be applied for securing hose, duct cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial and so on.
  • ✔ FLEXIBLE ADJUSTABLE SIZE RANGE- 10 inch hose clamps are flexible and ductile with wide adjustable size range from 9.7-10.6 inch (250-270mm). Fit for hose outside diameter 9.7-10.6 inch (250-270mm). Secures ducting tightly in place.
  • ✔ HUGE QUANTILY, SMALL COST: Each package consists of 8 pack 10 inch hose clamp (Easy Turn Clamp), the size of each clamp is about 10 inch
Rank No. #3
Exhaust Clamp Stainless Butt Joint 2Pcs 4" Band Clamp Exhaust Sleeve 4Inch 304 Stainless Steel Pipe Clamp Butt Joint Exhaust Muffler Clamp Band(2Pack)
  • HIGH QUALITY ---- Our exhaust clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.
  • Universal fitment.Joins 4" OD pipe to 4" OD pipe, you would better measure before pruchase.
  • These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
  • Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
  • NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !
Rank No. #4
Stage Light Clamp 110LB Truss Clamp for DJ Par Lighting O Clamp Fit Pipe Diameter: 25mm 36mm 48mm, 5 Pack
  • √ Easy Installation: Quick to lock and remove from the truss or adjust its place with ease.
  • √ Stable and Durable: High-quality O clamps can completely wrap around the truss to provide reliable protection for your lights.
  • √ Load Capacity: 50kg /110lb.Threaded Bolt: 10mm. Heavy duty lamp hook which is ideal to fix par light, moving head light, spotlight etc.
  • √ Fit Three Pipe Diameter:25mm 36mm 48mm. You can equip with different inner adapters according to the size of the pipe.
  • √ Pack of 5.
Rank No. #5
AKD Part Tube Clamp, 2pcs 2 inch Mounting Bracket Universal Bull Bar Nudge Bar Tube Mounts Roof Roll Cage Clamps Holder for SUV, ATV, Truck, Motorcycle, Boat
  • Durable solid steel construction with light-weighted, shockproof rate standard, our roll bar clamps will keep your ride a factory looking with dust-proof and no shaking.
  • Durable rubber gasket work together with the well made led pods roll cage clamps will protect your universal bull bar from drilling with factory looking, and no shaking, very sturdy.
  • Perfect suit for standard size 2 inch mounting brackets, bull bar, round tube, roof roll, roll cage, tubular bar, horizontal bar etc.
  • APPLICATION: Universal fit for all LED Pods, LED Cubes, Work Lights, Fog Lights, Driving Light, LED Light Bar etc, wide application.
  • The universal bull bar roll cage clamps led bar mounting brackets can apply to most Pickup, SUV, Truck, Motorcycle, UTV, ATV, off road and other vehicle with multi size of tubular bar, bull bar, roll cage etc. Any problem please feel free to contact us, 24 Hours Online Service.
Rank No. #6
8Pcs 4" Adjustable 304 Stainless Steel Duct Clamps Hose Clamp Pipe Clamp Air Ducting Clamp Worm Drive Hose Clamps (Fits Hoses from 3.5” Diameter up to 4.5”)
  • Package includes: 8 Pieces 4" hose clamps, fits hoses from 3.5” diameter up to 4.5”.
  • Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use.
  • Powerful function: Adopts an open inner and outer ring structure and fastened with bolts. Smooth surface, torsion-resistant and pressure-resistant, tightly locked and large adjustment range. Provides an excellent seal with a variety of hose materials, effectively solves the problem of liquid and gas leakage of the hose.
  • Easy to use: Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipe, cable, tube, automotive, industrial, boat, etc.
  • 100% Satisfaction guarantee and reliable customer service within a 24 hour time support.
Rank No. #8
Boao 4 Pieces Adjustable 304 Stainless Steel Duct Clamps Hose Clamp (8 Inch)
  • Package includes: 4 pieces 8 inch hose clamps
  • Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use
  • Function: can lock the hose very tightly, leak-proof, and ensure of clamps long lasting, quad lock construction
  • Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, secures ducting tightly in place. Note: the screwdriver not included, please make sure it before you buy.
  • Wide application: these dust clamps can be applied to secure hoses, pipe, cable, tube, fuel lines in domestic applications, automotive, industrial, boat, etc.
Rank No. #9
Amanaote Stainless Steel 3.2 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 6 Sets)
  • Bolt these around any duct and attach a piece of metal conduit with flattened and
  • Drilled ends (not included) for additional support from a wall or ceiling
Rank No. #10
VIVOSUN Stainless Steel Duct Clamps 12 inch (Pack of 2)
  • Pack of 2 clamps.
  • Variety of applications, easy to install.
  • Stainless steel and rust resistant.
  • Worm drive adjustable with screwdriver for a super secure fit.
Rank No. #11
Hose Clamps Assortment, 70Pcs Worm Drive Hose Clamp Adjustable 6-38mm Diameter Range Stainless Steel Pipes Hose Ducting Clips Kit with Screwdriver for Plumbing Automotive Mechanical Application
  • ✔ [ 7 DIFFERENT SIZES ] - Total 70pcs packed in a plastic box, easy to storage and carry, 10pcs 6-12mm, 10pcs 10-16mm, 10pcs 13-19mm, 10pcs 16-25mm, 10pcs 19-29mm, 10pcs 22-32mm and 10pcs 25-38mm. Enough to use for your spare and replacement.
  • ✔ [ RELIABLE QUALITY ] - Hose clamps are made of premium 304 stainless steel, solid, durable and not easy to deform, fit for long-term use. Smooth and burr-free surface also will not scratch or damage the hands and the hose.
  • ✔ [ ADJUSTABLE SIZE ] - This single ear hose clamp assortment has wide adjustable 6-38mm diameter range, you could free adjustment to adapt to different sizes of hose. We offer various sizes to meet your different needs, just choose the right size.
  • ✔ [ EASY TO INSTALL ] - Come with the tool, hose clamps with screwdriver allow you easily adjust the size according to the diameter of the pipe. Just thread the pipe through the suitable hose clip, then tighten the pipe and connector.
  • ✔ [ WIDELY APPLICABLE ] - Suitable for automotive, industrial, boat/marine, plumbing, household, etc. Perfect for securing hoses and pipe, likes, water pipes, drainage systems, garden hoses and more. Both fit for indoor or outdoor.
Rank No. #12
LOKMAN Duct Clamp, 2.5 Inch Stainless Steel Large Hose Clamp Adjustable Diameter 46-70mm Worm Drive Fuel Line Clamp for Plumbing Dryer Vent Automotive Mechanical Agriculture, 4 Pack (2.5 Inch)
  • Size is for DIAMETER, NOT FOR circumference. 304 STAINLESS STEEL HOSE CLAMP- The whole large duct clamp (including the band, housing and screw) are all made of premium 304 stainless steel. Durable, strong and rust resistant.
  • FLEXIBLE ADJUSTABLE SIZE RANGE- 2.5 inch hose clamps are flexible and ductile with wide adjustable size range from 46-70mm. Fit for hose outside diameter 46-70mm/1.8-2.7 inch. Secures ducting tightly in place.
  • WIDELY USED- Clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor.
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.
  • Package: 4 pack 2.5-inch stainless steel duct clamps included. Note: Large quantity order can be applied for the more favorable price. Please kindly contact us via email for detail. Thank you.
Rank No. #13
48" Galvanized Flexible Exhaust Tubing 4" Diameter Flex Pipe with 2 Band Clamps
  • One pre-cut 48" section of galvanized flexible exhaust tubing with 2 4" exhaust band clamps This exhaust pipe is 4" in diameter and can be used to connect automotive exhaust pipes that are not lined up together
  • The flexible nature of this type of exhaust tube allows for easily installation
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system
  • It does this by absorbing vibration and thermal expansion
  • When installing this piece of 4" dia
Rank No. #14
Rigid Pipe Strap Clamp Hanger, 2 Holes, Galvanized or PVC Pipes, IMC Conduit (10, 1 Inch)
  • Second photo shows dimensions.
  • Secures piping to studs or joists to reduce vibration noise.
  • Used to mount rigid or IMC conduits where higher load bearing supports are needed.
  • Feature a reinforced rib for extra strength. Corrosion resistant, made from durable and high quality steel.
  • Snap-On Installation. Two screw holes allow the installer to secure pipes on walls and ceilings.
Rank No. #15
A-KARCK Exhaust Clamp 2.5 Inch Diameter, 2.5 Inch Butt Joint Band Clamp Stainless Steel Exhaust Coupler Prevent Leaks
  • 【Dimension】Fit for 2.5 inch outer diameter pipe, 2.95 inch overall length.
  • 【Multipurpose】 Universal used in connecting pipes, muffler. The clamp prevents leaks and controls material deformation.
  • 【Unique Design】2 nuts and " Ⅰ " shaped metal block design, can evenly transmit the torque to the clamp. Close fit on the pipe.
  • 【Well sealed】Made of stainless steel, prevents corrosion and has a good seal.
  • 【Installation】Easy to install. Direct bolt on without any modification.
Rank No. #16
40" Adjustable Stainless Steel Hose Clamp, Duct Clamp, Pipe Clamp, Air Ducting Clamp with Flex Worm Drive, Quick Release Hose Clamps
  • Heavy duty, stainless steel to outlast the elements and harsh wind speeds
  • Will fit pipes, poles, or hoses at least 3" in diameter, polygonal shapes are OK
  • Easy to install with secure quick-release mechanism
  • Each clamp weighs approximately 3oz.
  • Over 100,000+ units sold!
Rank No. #17
Adjustable Stainless Steel Worm Gear Hose Clamps Water Pipe Clamps 4 Pcs (10 Inch)
  • Adjustable Stainless steel worm gear hose clamps fit hose diameter: 232-254mm (9"- 10"). Suitable for hose circumference: 49 cm-79 cm (19 inch-31 inch).
  • Hose clamps width: 12mm, thick: 0.6mm.
  • Hose clamps and screw material: 304 stainless steel.
  • Package content: 4 pcs pipe clamps.
  • The good quality of 304 stainless steel material hose clamp can resist the corrosion and rust in marine environments. Widely used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, mechanical, agriculture, boat/marine, shield, household etc. Both indoor or outdoor.
Rank No. #18
YDS All 300 Grade Stainless Steel Mini Hose Clamp, Worm Drive, SAE Size 2, 1/4" to 1/2" Diameter Range, 0.35" Bandwidth (Pack of 10)
  • 《Hose Clamp Size》In this box, we provide 10pcs 1/4”~1/2” (6-13mm) range mini hose clamps for your requirement, they can be adjusted to a minimum diameter is 6mm (1/4”) and a maximum is 13mm (1/2”), their band width are 9mm.
  • 《Durable Quality》All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance. They are durable, when installing on the pipe. Better installation torque 25 lbf.in. 9mm band width is more stable than common 8mm band width hose clamps. Our hose clamps can prevent from rusting and breaking.
  • 《Function and Use》These clamps are locking secure and tight, widely used in tightening hoses, pipe, cable, tube, etc. Mini hose clamps are perfect to apply for automotive, industrial, hardware, plumbing, household, agricultural etc.
  • 《Save Time & Money》These stainless steel hose clamps can be installed on hose joints or pipe fittings to prevent liquid leakage. High quality hose clamps can save your time and money on costly repairs of the pipe.
  • 《Adjustable Style》Come with the tool, hose clamp with screwdriver allow you easily adjusting the size according to the diameter of the pipe. Clamps are flexible and ductile, so you can install and remove them at any time.
Rank No. #19
GLIDESTORE 2-1/2 inch Key Hose Clamp (Clamping range 2-Inch to 2 3/4-Inch Diameter), Type Adjustable Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dust Collector (Pack of 10)
  • ✔ HIGH-END MATERIAL: 2.5 inch Hose clamp stainless steel made of stainless steel, constructed to resist scaling and corrosion and ensure long- term use.
  • ✔ AMAZING FUNCTION: These dryer vent clamp 2-1/2 inch are used to lock the hose tightly with a view to preventing flow leakage. This hose clamp assortment kit 2 ½ inch can be applied for securing hose, cable, pipe, tube, fuel lines in domestic applications, automotive, boat, industrial, Dust Collector and so on.
  • ✔ EASY TO USE: Can be simply loosened or tightened by using the adjustable handle without any other tools.
  • ✔ HUGE QUANTILY, SMALL COST: Each package consists of 10 pack 2.5 inch hose clamp, Clamping range 2-Inch to 2 3/4-Inch
  • ✔ 100% MONEY BACK GUARANTEE: Customer satisfaction is our utmost priority. If you are dissatisfied with 2.5 hose clamp, drop us a message and we are certain to give you a full refund.
Rank No. #20
Strong Hand Tools, Locking Chain Pliers, Removable 36″ Chain, Holds Up To 10.5" Diameter Pipes, Unique Easy Open Crank Handle, Quick Release Trigger, PFC1036
  • 36″ (910 mm) chain
  • Non-Slip grip marks on top and bottom jaws for positive gripping.
  • Secure Adjustment Bar minimizes bar pop-outs.
  • Quick release trigger.
  • Unique crank handle for fast, easy jaw opening and pressure adjustment.

Last update on 2020-11-14 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Large Diameter Pipe Clamps for our consumer to review. The reports above show ratings of the best overal, best cheap Large Diameter Pipe Clamps to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.