The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Ladder Roof Rack Clamps Screwfix of 2020 – Consumer Guide & Reviews

Rank No. #1
Tie Down Engineering Roof Zone 65005 Ladder Hook with Wheel Roof Ridge Extension (Pack of 2)
  • Rubber Grip T-bar to prevent damage to shingles and metal roofs
  • Yellow Zinc plated steel for longer life
  • 2 ladder hooks are recommended for each ladder (this Kit includes 2 hooks)
  • INCLUDES: 2 Ladder Hooks with Wheel
SaleRank No. #2
Qualcraft 2481 Ladder Hook with Wheel
  • Provides Ideal Method Of Securing The Top Of A Ladder To A Rooftop, When Used With A Paired Ladder Hook
  • Both Hooks Fit Over The Top 2 Rungs Of The Ladder & Hook Over The Roof Edge
  • Wing Nuts Of Both Hooks Are Tightened Holding The Ladder Firmly In Place
  • Designed To Fit Single Or Extension Ladders
  • Made From Powder Coated Steel For Superior Durability & Strength.
SaleRank No. #3
Seah Hardware Universal Roof Rack Cross-Bars 2 PC. 48 Inches
  • The straps go through the door frames, and attach the rack on top of the roof, it fits almost all four door car without side rails, it fit four door car with side rails which height is less than 6.4 cm from roof, because the distance from car roof to bottom of bar is 6.5 cm. It can not be installed on two door car, because there is too small room between the two bars in two door cars.
  • Comes with a pair of crossbars 120 cm. Heavy duty steel tube make it strong and safe. 4 PC 1/4" x 2" screw and 4 PC 1/4" lock nut.
  • Crossbars are adjustable in position. Install in minutes and disassemble in seconds.
  • With water proof ratchet tie down.
  • DO NOT OVER TIGHTEN!* 1800 lbs ratchet tie down ensures the roof bar will remain firmly on your car top. Whether it’s a kayak, mountain bike, or ladder, these cross bars will get your favorite things to anywhere.
Rank No. #4
TOUGHRAK BASE SIDE MOUNT TRAILER LADDER RACK
  • TOUGHRAK BASE SIDE MOUNT TRAILER LADDER RACK
SaleRank No. #5
CargoBuckle F18816 Ladder Rack Tie-Down System, Square Mount
  • Complete ladder rack tie-down system for trucks with square bracket for permanent mounting
  • 7 feet of professional quality webbing and strong double J-hook to secure your load
  • Package includes two retractable ratcheting tie-downs, square ladder rack adapter, and mounting hardware
  • Ideal for securing and towing a wide variety of gear -- from powersports and automotive to hardware and building materials
  • Square mount with 1-1/4-inch bracket
Rank No. #6
AA-Racks Model DX36 Universal 2 Bar Drilling Van Roof Ladder Rack Heavy-Duty Adjustable Steel Rack - Sandy Black
  • Mounts onto roof of vehicle (drilling required for installation)
  • 17 Gauge (1.35mm actual) Steel construction provides 350lb Max. loading capacity
  • 1.2" diameter cross bars;Length adjustable from 35" to 57",4" total height clearance
  • 11 gauge (3.2mm actual) high strength steel mounting base
  • High quality roof top cross bar set design fits most vehicle with or without drip rail
Rank No. #8
tiewards Ladder Rack for Exterior Side Wall for Enclosed Trailer (Carry 2 ladders)
  • This ladder racks allow you to carry 2 ladders or other similarly shaped gear on the exterior side wall of your enclosed trailer
  • Eliminates the need to climb on top of the trailer to reach your ladders. Can be used to transport pipe, conduit, or similarly sized gear
  • Adjustable brackets can be installed at varying heights on the towers. Can be staggered for level installation of oddly shaped ladders. Pre-drilled towers install easily on your open air trailer. Welded gusset provides anchor point for a lock and chain (not included) to secure your ladder
  • Sturdy steel construction with gray powder coat finish resists rust. Unique hammered pattern adds a touch of style
  • 4 Brackets, 2 towers, 8 bungee cords, and mounting hardware included
Rank No. #9
HOUSE TUNING Roof Rack Clamps -Pack 4,1.75" Tube Clamp Bracket,Roll Bar Light Clamp,Roll Bar Mounting Brackets,Tube Light Mount 1 3/4" for Light Bar (1.75"-Clamp Mount kit)
  • Strong Aluminum alloy Bar Clamp Bracket
  • 1.75 inch ( 1 3/4") Roof mount Light Bar Clamp Bracket
  • 1.75 inche Round Bar Clamp Bracket Fast and qucikly Mount
  • Universal Bar Clamp Bracket,work for HID/LED work light,led light bars,roof basket faring,boat light
  • Wide Bar Clamp Bracket for motorcyle and bicycle ATV UTV Boat JEEP turcks
Rank No. #11
AA-Racks Model DX36 Universal Pickup Truck Cap & Topper 2 Bar Ladder Roof Van Rack System Adjustable Steel Cross Bars - Sandy Black
  • Will fit onto toppers (drilling required for installation)
  • 17 Gauge (1.35mm actual) Steel construction provides 350lb Max. loading capacity
  • 1.2" diameter cross bars;Length adjustable from 35" to 57"
  • 11 gauge (3.2mm actual) high strength steel mounting base
  • TOPPER/CAP NOT INCLUDED
Rank No. #12
Audak 1 Pair 3 Inch Aluminum Mounting Bracket Tube Clamp for Bullbar Roof Rack Roll Cage (75-77mm/2.95-3.03 Inch Adjustable)
  • FITMENT: Will fit 75-77mm/2.95"-3.03" round tubes, bull bars, roll cages, tubular bumpers, etc
  • TOP QUALITY MATERIAL AND ACCESSORIES: Main body are made from heavy duty 6063 aluminum with outdoor powder coated finish, which is corrosion resistance, temperature resistance and anti-scratch. Stainless steel screws are rust-proof and corrosion resistance.
  • EASY INSTALLATION: Pre-drilled hole for easy installation, you just need to clamp it on your bull bar or grill guard without drilling holes to it.
  • KIT CONTENTS: 2pcs clamps, 2pcs rubber pads, 1pc "L-shaped" hex wrench and necessory screws.
  • GET IT WITH CONFIDENCE: We offer you a 1-year full warranty as well as lifetime customer support and excellent after-sale service. With absolutely nothing to worry about, get this amazing mounting bracket for your vechicle today!
Rank No. #13
Pair Of Ladder Rack Ratchet Tie-Down Straps Square Mount Replaces Buyers 5480005
  • 7' x 1 1/2" Strap W/ Double J-Hooks
  • Breaking Strength is 1500 Lbs
  • 500 lb Working Load Limit
  • Zinc Plated with Black Powder Coat Finish
  • Steel Bracket for Square or Rectangular Frame
SaleRank No. #14
Highland 2006200 Black Heavy Duty Bar Carrier
  • Designed with heavy duty gauge steel for commercial use
  • Fits most Vans with rain gutters
  • Expands from 37 inches to 62 inches
  • All hardware is included
  • Easy to store and assemble
Rank No. #15
AA-Racks Model DX36 Universal Pickup Truck Cap & Topper 2 Bar Ladder Roof Van Rack System Adjustable Steel Cross Bars - Sandy Black
  • Will fit onto toppers (drilling required for installation)
  • 17 Gauge (1.35mm actual) Steel construction provides 350lb Max. loading capacity
  • 1.2" diameter cross bars;Length adjustable from 35" to 57"
  • 11 gauge (3.2mm actual) high strength steel mounting base
  • TOPPER/CAP NOT INCLUDED
Rank No. #16
Yakima - SideLoader Accessory for Truck Roof Rack Systems
  • Works with Yakima 1A Raingutter Towers on canopies and shells without raingutters.
  • Fits in the space between the top of the truck and side window
  • Comes with stainless steel hardware
  • Love it 'Till You Leave It Limited Lifetime Warranty.
Rank No. #17
MaxxHaul 70440 Gutter Mount Van Rack (500 lb. Capacity)
  • Easily mounts to van's rain gutter to carry ladders, canoes, and more on top of the van
  • Gutter Mount Van Rack - 500 lbs. Capacity
  • The crossbar uprights have a wide base to spread the load evenly and safely
  • No drilling required for installation
  • Convenient rope hooks are built into each upright to secure load with straps or ropes
Rank No. #18
AA-Racks P-AC-04N Utility Track System Mounting Clamp for Toyota Tacoma/Tundra Truck Cap/Camper Shell, Set of 4 - Black
  • Set of 4 high quality and strength truck cap clamps, Constructed of tempered aluminum with a Mill Finish
  • Seize easily and fit firmly for many truck caps and camper shell
  • For the specific size, please refer to list picture No. 4 for reference
  • Compatible with Tundra '07 and newer w/Cargo Rail & Tacoma '05 and newer w/Cargo Rail
Rank No. #19
Spec-D Tuning Heavy Duty 1000LB Truck Ladder Rack Pick Up Lumber Cargo Adjustable
  • ✔️ All of Our Items are 100% Brand New! You Will Never Receive a Used Item From Us!
  • ✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
  • ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
  • ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
  • ✔️ FITMENT: Fit for most Pickup truck.
Rank No. #20
PROGRIP 198010 Truck Rack Tie Down Top Loader Strap with J-Hooks and Adapter: Black Coated, 8' x 1 1/2"
  • Tie down strap enabled to be bolted or welded to a top loading truck or cargo rack, ideal for construction work or occasional use by truck owners
  • Constructed with zinc plating to help prevent corrosion and black powder coated to blend in with truck or cargo rack; yellow strap measures 8' long and 1 1/2" wide
  • Strap made with polyester webbing that resists mildew, UV rays, shrinkage and prevents stretching when wet; supports 500-pound working load limit and has a 1500-pound breaking strength
  • When attached to cargo rack simply unhook strap while unravelling enough to fit around desired item, hook onto one of two built-in attachment points, and take up slack with the large easy-twist knob
  • Tie down features 3 ways to tighten load using 5/16" diameter rod, 3/4" wrench, or 3/8" drive socket wrench (tools not included); comes with round tubing adapter in packing to help mount cargo rack

Last update on 2020-11-22 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Ladder Roof Rack Clamps Screwfix for our consumer to review. The reports above show ratings of the best overal, best cheap Ladder Roof Rack Clamps Screwfix to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.