The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Inkbird Itc 1000 of 2020 – Consumer Guide & Reviews

Rank No. #1
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
Rank No. #2
Inkbird 1.97" NTC Stainless Probe Sensor for ITC-306T, ITC-308, ITC-1000, ITC-310T Thermostat Temperature Controller
  • Probe Dimensions: 6mm x 50mm (0.24in x 1.97in);
  • It is good for beer mashing, fermentation ect.
  • Stainless steel material,
  • It can be removed easily.
  • It's ONLY compatible with INKBIRD's following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.
Rank No. #3
Inkbird 1.97 inches NTC Stainless Probe Sensor Thermocouple for ITC-306 ITC-308 ITC-1000 IPB-16S Thermostats
  • It is good for beer mashing, fermentation ect.
  • Probe Dimensions: 6mm x 50mm (0.24in x 1.97in);
  • It can be removed easily.
  • It's ONLY compatible with INKBIRD's following controllers: ITC-308,ITC-306T,ITC-310T, ITC-1000.
  • Stainless steel material,
Rank No. #4
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays Only ITC-1000 Probe
  • Sensor: NTC Sensor, 78.7inch/2M
  • Power Supply: 110VAC 50Hz/60Hz
  • Temperature Measuring Range: -50~210 F / -50 ~ 99 C
  • Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC)
  • Storage Temperature: -30 C-75 C
Rank No. #5
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
  • 【Output】2 Relays, control the temperature by setting the temperature set value and the difference value.
  • 【Mode】Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.
  • 【Calibration】Temperature calibrating, refrigerating control output delay protection.
  • 【Alarm】When temperature exceeds the limit or when sensor error it will alarm. It can be used for peltier water cooling device, cooling fan, car's 12v battery, 12 volt chest cooler,heater etc.
  • 【Warranty】12V temperature controller with 1 years warranty.
Rank No. #6
Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt
  • It does indeed read in deg F.
  • Can control both heating and cooling output
  • Has an alarm to indicate sensor failure or high temperature
  • Highly accurate and reliable temperature controller
  • Be more user friendly than the STC-1000
SaleRank No. #7
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
Rank No. #8
Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit
  • 🔆🔆There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
  • 🔆🔆Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
  • 🔆🔆By setting the temperature set-point and the difference between the temperature set-point and the difference.
  • 🔆🔆Alarm when temperature is out of limit or sensor is wrong.
  • 🔆🔆Switch between refrigeration and heating modes, temperature calibration.
Rank No. #9
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew
  • 💙💙US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety.
  • 💙💙Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
  • 💙💙Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
  • 💙💙More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
  • 💙💙Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Rank No. #10
Inkbird Digital PID Temperature Controller Position Control Thermostat AC 12 to 24V ITC-100VL
  • Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
  • PID and ON/OFF Control Mode with high standard self-adjust function
  • Omron relay inside.It is more suitable for setups without water cycle, such as ovens.
  • Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.
  • Accuracy of displaying and controlling 0.1ºC
Rank No. #11
Sous -Vide Cooker, Inkbird WiFi Sous Vide Culinary Precision Cooker | 1000W Immersion Circulator with Recipes,Timer | Ultra-Quiet : ISV-200W Sous Vide Machine
  • 【2.4GHz Wifi Sous Vide Cooker】Connect the Sous Vide to a 2.4GHz Wi-Fi network via Free APP: InkbirdPro, then you could SET and Monitor the Sous Vide Machine on your phone wherever you're.Could set your family members as administrators on the app if you're willing to share the device monitoring data with them, support max 100 administrators at a time.
  • 【Accurate Timer】The immersion circulator supports timer (Timer Max:100 Hours ) and temperature settings ( Temperature range: 32℉~194℉( 0℃~90℃) ). Precisely set the water to a preferred temperature, then you can get the doneness you desire every time as this preset cooking method ensures perfect results.High temperature accuracy: 1℉/0.1℃.
  • 【Protection and Temperature Alarm】The WiFi Sous Vide Culinary Precision Cooker will stop working and alarm when the water level is lower than the minimum scale line, it will also sound alarm when the current temperature reaches the target temperature. You won’t miss any important change in the cooker. Please feel free to contact us, we will reply in 24 hours.
  • 【Easy to Use and no noise】To improve your favorite meals or cook new dishes, tons of amazing foods can be created with it easily. Fix the Sous Vide to your pot with the clamp, fill the pot with water, seal the food in a bag and put it into the pot, set the food to the exact temperature, then you can get perfect doneness you desire. We have prepared some recipes in the app and the personalized customization recipe is now available.
  • 【Powerful&Durable】The precision cooker has adopted stainless steel column and high-end fast heating element. The 1000Watt cooker is powerful enough to heat up the water to the set temperature quickly and it will perfectly maintain the temperature for an extended period of time.
SaleRank No. #12
Inkbird Humidity Controller IHC200 Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier
  • Humidity measuring range: 5~99.99%RH; Humidity control range: 5~99%RH; Accuracy: ±3%RH
  • Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature
  • Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;
  • Alarm when sensor error or humidity exceeds limit;
  • Alarm when humidity exceeds high/low humidity setting value;
Rank No. #13
Inkbird ITC-106VH PID Temperature Thermostat Controllers Fahrenheit and Centigrade AC 100 to 240V for Sous Vide Home Brewing Oven Incubator
  • 🎉🎉Support reading with Centigrade or Fahrenheit unit.It is more suitable for setups with water cycle. If the device does not have water cycle, the ITC-100 series is recommended.
  • 🎉🎉Dual display window, be able to display measured temperature and set temperature at the same time
  • 🎉🎉Simplify operational processes and you don't need to operate more steps if you want to set the definite value
  • 🎉🎉High accuracy of displaying and controlling. Manual and Auto turning are available
  • 🎉🎉Mounting Method: Flush mounting and screw terminals
Rank No. #14
Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink
  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time
SaleRank No. #15
Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and 24 Hours Digital Day & Night Cycle Timer Controller for Seed Germination Reptiles Hatching
  • 👏👏【Convenient Design】Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
  • 👏👏【Dual Display Window】Be able to display measured temperature and set temperature at the same time.Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
  • 👏👏【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
  • 👏👏【Only Heating】Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
  • 👏👏【Sensor Length 】2m / 6.56ft
SaleRank No. #16
Inkbird Sous Vide Precision Cooker , 1000 Watts WIFI Sous Vide Machine Immersion Circulator ISV-100W with Recipes on Thermal Immersion Sous vide cooking Machines & APP (American Standard)
  • ★ 【Wifi Remote Control】The WIFI sous vide cooker only support 2.4Ghz WIFI, but once connected with the sous vide machine with your router via APP InkbirdPro, it could be checked and controlled anywhere you're
  • ★ 【Powerful Yet Quiet Cooker】 This sous vide precision cooker keeps a homogeneous temperature for up to 20 L of water even at full 1000 W output; ultra-quiet with less than 40 dB noise at 1 m
  • ★ 【Precision Cooker & Intelligent Design】 Our sous vide cooker features a wide temperature range of 77-210°F (25-99°C) within 0.1°C accuracy and the max timer setting of 99 hours; intuitive LCD touch controls allow effortless adjustment and tracking
  • ★ 【Cook Like a Chef at Home】 Achieves restaurant quality meals with ease by preserving juices, moisture and flavors thanks to precise temperature control; retains all of the health and nutrition benefits that are difficult to achieve from traditional cooking; included easy-to-follow sous vide cooking recipe book recommended by top chefs
  • ★ 【Reliable Cooking Partner】Additional calibration function is added to Inkbird Precise Cooker, which can keep a more accurate temperature at any time. Calibration range: -10F~10F
Rank No. #17
Inkbird WiFi Sous Vide Cooker Culinary Cooker, 1000 Watts, Recipe, Precise Temperature and Timer, Programmable Interface, Stainless Steel Thermal Immersion Circulator for Kitchen
  • ➤ 【2.4GHz Wifi Sous Vide Cooker】---This immersion circulator cooker can be remote controlled by Free APP(InkbirdSmart) , which will free you and cook everywhere, stay up-to-date on your cooking status without being in the kitchen. What’s more, a nice design of this slow cooker is you can share the device with family or friends on App, no limit for multi people connect. And preset values will be saved when power off. The basic setting procedure also can finished on the sous cooker.
  • ➤ 【Programmable with No noise】 --- No other equipment needed. Put the programmable precision cooker to any pot with water and drop your desired food in a sealed bag or glass jar. Simply set temp and timer anywhere of wifi range to free yourself and make taste food with more nutrients and vitamins. Keep silence during cooking, no worry about the noise disturb. What’s more, you can choose recipe and set temperature on the machine directly.
  • ➤ 【Precision Temperature and Timer】---Temperature range and accuracy of this sous vide circulator are 77°F~210°F (25ºC~99ºC ) and 0.1℃(1°F ), -10F~+10F calibration range could keep the high precision after a long period of using. The max timer range is 99 hours 59 minutes, start timer when the temp reach your settings, let your cooks get enough and accurate . Also readable LCD screen: (W)36mm*(L)42mm ,128*128 Dot Matrix LCD.
  • ➤ 【Fast and Constant Heat Circulation】---1000 watts of this sous vide machine let the water circulation heats water fast and make full meat tender and moist. 360 degrees water circulation Transfers heat efficiently. Fits on any pot and suit for vegetables, meat, fruit, cheese, egg and so on, you can choose recipe both from APP on your phone and on the instant pot sous vide LCD screen.
  • ➤ 【Protection and Temperature Alarm】---This thermal cooker will stop working and alarm you when the water level is lower than the minimum. Also will alarm you when temp reaches target setting value. The stainless steel is easy to clean. While this unit is not waterproof. The water level can not over the max line.
Rank No. #18
Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp
  • 💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
  • 💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
  • 💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
  • 💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
  • 💦💦【Term of service】Purchase products and get a one-year warranty.
Rank No. #19
Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
  • Plug and play design, easy to use;
  • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
  • Support reading with Centigrade or Fahrenheit unit
  • Maximum output load: 1100W(110V)
  • Dual display window, be able to display measured temperature and set temperature at the same time
Rank No. #20
Inkbird ITC-306A WiFi Temperature Controller, Wi-Fi Aquarium Thermostat Heater Controller 120V~1200W Temperature Control with Two Probes only for Heater Aquarium Breeding Reptiles Hatching.
  • 🐠🐠 [Dual Protection] The aquarium temperature controller is equipped with 2 relays to ensure that the power can be turned off under any circumstances, this will protect your fish from being hurt by overheated water. (US Socket Only)
  • 🐠🐠[Two Probes] Your fish might be in danger as it is hard to know the probe is broken immediately if the temperature controller has only 1 probe. The dual probe aquarium temperature controller will alarm if the temperature difference between 2 probes is bigger than 3℃/5℉, and the app will push a notification at the same time.
  • 🐠🐠 [Continuous Heating Alarm] The heating time can be set according to your needs from 1 hour to 72 hours, the controller will alarm if water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉ and the detectable temperature range is -40℃~100℃/-40℉~212℉.
  • 🐠🐠[Plug and Play] The 1100w high-power aquarium temperature controller is compatible with most kinds of heaters, you don’t need to assemble the product yourself, just plug and play.
  • 🐠🐠[APP Notification] Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the APP, the app will push notifications to remind you.

Last update on 2021-12-05 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Inkbird Itc 1000 for our consumer to review. The reports above show ratings of the best overal, best cheap Inkbird Itc 1000 to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.