The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Induction Heater For Bolt Removal of 2020 – Consumer Guide & Reviews

Rank No. #1
Ductor Magnetic inducing Heater Kit For Automotive Flameless Heat Tool Automotive Flameless Heat Tool Hand-held Thread-lock Compound Nuts Design
  • 🔩【Scientific design】: Mini ductor 1200W flameless, produces no fire, no avoiding plastic and other flammable substances.LED light is installed at terminal position end provides for work area illumination even when you work in the dark.With air vent at the other end of the mini ductor, opposite the LED light. Ergonomic grip is for better handling.
  • 🔩【Professional tools】: Screw removal, high‑voltage electrical screw removal, sturdy screw can also be used to power tower, switches, transformer screw removal, heating expand bearing, can be applied to a variety of industries and disassembly of the device.Not need water cooling, safe, easy to use, convenient to carry, good heat stability, and can be used in outdoor, indoor.
  • 🔩【High-quality materials】: The Magnetic Induction Heater is made of Iron + ABS for strength and durability, fine workmanship, sturdy, antirust and corrosion resistant, long durability.Manufactured according to strict quality control standards, the improved design can extend the service life.
  • 🔩【Widely used】: Mini induction heater, can be heat for the automotive, machinery, and a variety of small parts metal parts, mainly for heating various car rusting bolts, nuts, gears, pulleys, pulley, bearings.
  • 🔩【Multifunctional storage box】: Comes with a carrying case for the whole complete Induction Heater kit, so that you can organize and organize them, so that they are arranged in an orderly manner, your tool room will no longer be messy, and it is convenient for you to carry around.
Rank No. #2
JWGUTS Induction Heater with 8 Pieces Coils 1000W 110V Magnetic Automotive Flameless Heating Handheld Bolt Removal Rusty Screw Removing Tool
  • ⚙️Flameless Heating: This induction heater adopts high frequency magnetic fields to heat up metal only with induction heat.No open flame cause by the heating, to ensure your working environment in safe.
  • ⚙️Ergonomic Design: Induction bolt heater with ergonomic grip for comfort handling. LED light can light up work area to provide clearly view even in dark environment.
  • ⚙️Fast and Efficient: Equipped with high-performance drive chip,this induction tool has a great heating performance,which can heat up to 800 ℃ within 5-40 seconds.
  • ⚙️Widely Applicaiton: Heat induction tool used for heating threaded nuts and rusty screws, suit for loosening stuck parts, bearings, gears, pulleys, wheel nuts, in-line applications, fuel tank belts, PDR applications (paint-free dent repair) etc.
  • ⚙️Package Include: Magnetic induction heater kit inculde a host, 8 pcs coils(Φ30mm/1.2" *2, Φ40mm/1.6" *2, Φ50mm/1.96" *2, 720mm long coils *2), one aluminum alloy box.
Rank No. #3
Magnetic Inducing Heater Kit Mini 110V Induction Heater Tool with Coils Bolt Heat Remover for Automotive Flameless Heat Induction Hand Tool Kia-1000 Car Disassembly Repair Tool
  • [Good compatibility]- An induction heater is a key piece of equipment used in all forms of induction heating.Without the worry of harming the adjacent area.
  • [Working Principle]--The inductor is a hand-held one with slip-resist ergonomic housing. It adopts high frequency magnetic fields to heat up metal ONLY with induction heat. Heats and expands frozen, rusted or thread-lock compound nuts without flame damages.
  • [More Efficiency]--Faster and safer than traditional torch.The advantage if using this device is it is totally flameless.In around 30 seconds, it can heat a 20mm diameter bolt to a temperature above 300ºC, maximum temperature can reach around 750ºC.
  • [Wide range of applications]--A flameless solution for releasing metal hardwares and components from corrosion. Loosen seized hardware, bearings, gears, pulleys, lug nuts, in-line applications, fuel tank straps, PDR applications (paint-less dent repair), etc.
  • [Easy to use]--Light weight, do not need water cooling, and very easy to use.A bright LED light exists to light up your work load.
Rank No. #4
Magnetic Induction Heater Kit, 1000W 110V Hand Held Induction Heater for Rusty Screw Removing, Automotive Flameless Heater with 3 Coils and Portable Storage Box
  • A flameless solution for releasing metal hardwares and components from corrosion
  • Loosen seized hardware, bearings, gears, pulleys, lug nuts, in-line applications, fuel tank straps, PDR applications (paint-less dent repair), etc.
  • It adopts high frequency magnetic fields to heat up metal ONLY with induction heat
  • Heats and expands frozen, rusted or thread-lock compound nuts without flame damages
  • The inductor is a hand-held one with slip-resist ergonomic housing; Faster and safer than traditional torch
Rank No. #5
EMAGIH 110V 1000W With 10 Pieces Coil Kits Auto Use Bolt Remover PDR Car Garage Repairing Flameless Handhled Electromagnetic Mini Induction Heater Tool
  • 【CAR REPAIRING】 Preheat become attached or rusted fasteners and parts that need to be separate e.g.Removing rust from metal and car body by high-speed heating parts, and flaking rust. Removing paint coating to a metal surface or body cars.Heating the surface of the hood or other surfaces to be coated vinyl.Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening.
  • 【REMOVE FIXTURES】Removing glued on painted metal spoilers, moldings, stickers.Snyatie small laminated glass sealants for metal.
  • 【BURNING SILENT BLOCKS】 Pressed on beams running gear or other machinery and equipment.
  • 【HEAT TREATMENT】 Heat treatment of metal parts,hardening,tempering,normalizing. Be attention: the machine can't heat Copper and Aluminum.
  • 【WARRANTY】One year quality assurance
SaleRank No. #6
JWGUTS Induction Heater Coil Kit, 8pcs Preformed Ductor Coils for Magnetic Induction Heater, Automotive Flameless Heat Bolt Removal Accessories
  • Induction heater coils kit for flameless heating.Suitable for heating various bearings,safely removing rusty bolts and nuts.
  • 6 Coils diameters: 30mm/1.2", 40mm/1.6", 50mm/1.96".
  • Free forming coils measures 750mm/29.5”.
  • All coils are coated to eliminate oxidation and guarantee contact.
  • Resistant to elevated temperatures 400-600 degree,these induction coils will last for approximately 100 uses or more subject to use.
Rank No. #7
110V Ductor Magnetic Induction Heater Kit, Magnetic Heater Bolt Removal Tool Flameless Lossless Heating System for Various Machine Tools
  • ①GREEN & SAFETY: 1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent/1.9 Kg weight with; Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage.
  • ②FLAMELEASS LOSSLESS HEATING SYSTEM: Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench.
  • ③EASY TO USE: Only 3 minutes to master; Equipped with two LED lights for narrow and dark space. And more coils are available. Each line is suitable for the size of different types of bolts.(Do not damage the bolt and the material around the equipment.)
  • ④WIDE APPLICATION: The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools.
  • ⑤ABOUT US: SHIP FROM US STOCK ! We have our own overseas warehouse and a professional Customer Service Team to reply you within 24 hours. If you have any Questions, please feel free to contact us. We promise you that we will do our ultmost to solve it for you firstly.
Rank No. #8
INDUCTION INNOVATIONS - Mini-Ductor Venom Portable Induction Heater With Coil Twist Lock
  • COIL TWIST LOCK: Coils can now lock down with one simple turn (no more thumb screws), and Venom works with all Mini-Ductor coils.
  • ERGONOMIC DESIGN: Venom’s lightweight, ergonomic design allows for induction heat to access hard to reach places more easily.
  • LED INDICATOR: a Red LED will light under fault conditions, and Green LED lights while the trigger is active, and the tool is heating properly. Any event that causes the red LED to illuminate will protect the tool by starting a 3-second lockout.
  • USER CONTROLLED LED SWITCH: as long as the tool is powered and the internal power supply is operating, the LED will remain lit when the switch is on.
  • FAN OPERATION ENHANCEMENTS: the fan continues to run after the trigger is released to aid in thermal cycle time reduction, and will stay powered when the thermal switch opens to aid in cooling the tool.
Rank No. #9
1100W Induction Heater Tool, 8 Coils Magnetic Induction Heater Kit For Bolt Removal, Hand-held Automotive Flameless Heating Rusty Screw Remover for Heating Nuts, Gears, Bearings
  • 1100W flameless heater using a high frequency magnetic field to heat the metal, produces no fire, no avoiding plastic and other flammable substances.Faster and more precise and efficient than oxy-acetylene system.
  • Heat induction tool is equipped with fan cooling, thermal protection device, and thermally stable plastic casing,not need water cooling, safe, easy to use, convenient to carry, good heat stability, and can be used in outdoor, indoor.
  • This induction bolt heater is made of Iron + ABS for strength and durability,with a granular slip resistant handle,allows you to use and work efficiently and easily.
  • Through heating threaded nuts and rusty screws to achieve the effect of loosening them.This induction heater tool can be used for automobiles, machinery, and various small Heat treatment of metal parts such as car rusting bolts, nuts, gears, pulleys, pulley, bearings, and other precision parts.
  • Our mini ductor induction heater kit equipped with 8 coils: Dia 30mm/1.2in * 2, Dia 40mm/1.6in * 2, Dia 50mm/1.96in * 2, 750mm Free forming coils * 2.Come with an aluminum alloy suitcase, convenient to storage and carry around.
Rank No. #10
Magnetic Induction Heater Tool Kit Magnetic Heater Bolt Remover Tool Induction Heating Bolt Remover Tool Flameless Heat Tool for Car Truck 110V (US STOCK)
  • ★【Safe and Environmental Protection】Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage.
  • ★【Fast Heating】Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench.
  • ★【Features】Flameless Lossless Heating system Green&Safety. 1 minute Removal process/97%Lower power consumption by/1 cent removing 1 bolt only cost you 1 cent.
  • ★【With Two Led Lights】Equipped with two LED lights for narrow and dark space. Easy to use, only 3 minutes to master.
  • ★【Advantage】Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools.
Rank No. #11
INDUCTION INNOVATIONS - Mini-Ductor II Handheld Induction Heater and Flameless Torch Kit
  • FLAMELESS: The Mini-Ductor II Induction Heater releases metals from corrosion and thread lock compounds without the dangers of an open flame, up to 90% faster than conventional methods.
  • SAFER THAN THE TORCH: The induction heating design, which uses high-frequency magnetic fields, reduces the risk of personal injury, tool damage, collateral damage, and property damage, providing a safer alternative to open flames.
  • ERGONOMIC: The Mini-Ductor II is completely handheld, has a no-slip grenade-style grip, and a bright LED light to illuminate your work area.
  • VERSATILE: This mini heat gun can be applied to bearings, brake anchor pins, exhaust manifold bolts, fuel tank straps, clevis pins, and hundreds of other applications, making a fantastic addition to your automotive tool kit.
  • COMPREHENSIVE KIT: The Mini-Ductor II Kit includes a Carry Case, a 7/8" Pre-Formed Coil, a U-Form Coil, and a Bearing Buddy Coil for a tool kit that can be used for a variety of situations.
Rank No. #12
Solary Magnetic Induction Heater Kit 1000W 110V For Automotive Flameless Heat Induction Heat 1KW Hand Tool
  • Reinforced heat stabilized thermoplastic housing provides for increased durability inside and out.
  • Covered terminals for superior safety protection.
  • Improved ergonomics with a granular slip resistant handle, and work area with high illumination (LED).
  • Will heat through rubber or plastic.Equipped with fan cooling and thermal protection.Will not damage nearby heat sensitive parts.
  • By using the eletromagnetic fields to heat the ferrous and non ferrous metals, induction heater can turn a 3/4 nut cherry red in 15 seconds, which is faster and more precise and efficient than oxy-acetylene system, no open flame cause by the heating, to ensure your working environment in safe.
Rank No. #13
Magnetic Induction Heater Kit, 1000W 110V Hand Held Automotive Flameless Heat Bolt Buster Tool For Rusty Screw Removing with 8 Coils and Box
  • [High working efficiency]By using the eletromagnetic fields to heat the ferrous and non ferrous metals, which is faster and more precise and efficient than oxy-acetylene system.It adopts high frequency magnetic fields to heat up metal With induction heat.
  • [Work area with high illumination (LED)]Provides for work area illumination even when you work in the dark.Can more clear understanding of the work progress, and know the status of heated objects 。Reinforced heat stabilized thermoplastic housing provides for increased durability inside and outside.
  • [Wide Application] Suit for loosen seized hardware, vent shades,bearings, gears, pulleys,seat belts part,torx bolt, lug nuts, in-line applications, fuel tank straps, etc.
  • [Safety]Equipped with fan cooling and thermal protection.Will not damage nearby heat sensitive parts.No open flame cause by the heating, to ensure your working environment in safe.
  • [Aluminum alloy blue tool box and 8 coils]Solid and durable, cool and beautiful. You can carry it away at any time when you go out to work, and while keeping your studio tidy and orderly.4 different sizes of coils,2 coils of each size,A variety of coil models and sizes can be adapted to work requirements in many ways.Make your workflow smoother.
SaleRank No. #15
Bolt Buster BB2-ACC Orange/Black Handheld Heat Induction Tool
  • New Design Delivers 1200 Watts of Induction
  • Comes with Advanced Coil Kit Valued at 150. 00
  • Lighter Cylindrical Design More Easy to Handle
  • 1 Year
Rank No. #16
VEVOR Magnetic Induction Heater Kit 1000W 110V Automotive Flameless Heat Tool Hand Held Induction Heater for Rusty Screw Removing, Automotive Flameless Heater with 8 Coils and Portable Storage Box
  • Flameless Heat: The induction bolt heater has a great performance, it adopts high frequency magnetic fields to heat up metal ONLY with induction heat.
  • Indication Led Light: LED light is installed at terminal position end provides for work area illumination even when you work in the dark.
  • Ergonomic Grip: It has air vent at the other end of the induction heater, opposite the LED light. Ergonomic grip is for better handling.
  • Portable Case: It comes with a carrying case for the whole complete Induction Heater kit and easier storage and carrying.
  • Wide Application: Suit for loosen seized hardware, bearings, gears, pulleys, lug nuts, in-line applications, fuel tank straps, PDR applications (paint-less dent repair), etc.
Rank No. #17
Anbull Handheld Mini Magnetic Induction Heater Kit with 10pc Coils for Automotive Flameless Heating, Rusty Screw and Hot Assembly Metal Induction Remover (Blue Case,110v, 1000W)
  • 🔘【Safe & Efficient】 - Using a high-frequency magnetic field to heat the metal, flameless and uniform heating, faster more effective than the oxygen-acetylene system, so that the heated object can be quickly disassembled. Induction Heater Kit is equipped with fan cooling, thermal protection device, and thermally stable plastic casing, it will not damage sensitive parts of the device (such as fuses), nor burn surrounding flammable materials, thus making working.
  • 🔴【Complete Configuration】- Mini Ductor Induction Heater Tool contains a host, 10 coils (inner diameter 1.18in/*2, inner diameter 1.57in/*2, inner diameter 1.97in/*2, 2 soft copper wires, two mosquito coils), and 2 manuals. It also comes with a blue aluminum alloy box, easy to use, and easy to carry.
  • 🔘【Magnetic Induction & Intimate design】 - The overall ergonomic design, with a granular non-slip handle, is miniaturized, and the mini version of the handheld sensor allows you to use and work efficiently and easily. Install LED lights at the end of the terminal to light up your work area, so that you are not afraid to work in the dark.
  • 🔴【Widely Used】 - 1000W handheld inverter power supply and thermal expansion assembly method (thermal expansion and contraction) are mainly used for heating threaded nuts and rusty screws to achieve the effect of loosening them. In addition, they can also be used for automobiles, machinery, and various small Heat treatment of metal parts such as gears, pulleys, pulley, bearings, and other precision parts .
  • 🔘【AFTER SALES】The professional after-sales team can help you solve the problem, welcome to consult the product-related problems. 🚩🚩🚩Notes: The product is an air-cooled induction heater , and the cooling speed is slower than that of water cooling. If the cooling time is too short during overheating protection, it will inevitably quickly enter the overheating protection state again. Thank you for your trust in this induction heater.
Rank No. #18
Solary Magnetic Induction Heater Kit with 4 coil 1000W 110V For Automotive Flameless Induction Heat 1KW Hand Power Tool
  • Reinforced heat stabilized thermoplastic housing provides for increased durability inside and out.
  • Covered terminals for superior safety protection.
  • Improved ergonomics with a granular slip resistant handle, and work area with high illumination (LED).
  • Will heat through rubber or plastic.Equipped with fan cooling and thermal protection.Will not damage nearby heat sensitive parts.
  • By using the eletromagnetic fields to heat the ferrous and non ferrous metals, induction heater can turn a 3/4 nut cherry red in 15 seconds, which is faster and more precise and efficient than oxy-acetylene system, no open flame cause by the heating, to ensure your working environment in safe.
Rank No. #19
Mini Magnetic Induction Heater Kit, High Power Heat Induction Hand Held Tool, for Rusty Screw Removing, Automotive Flameless Heater with Advanced Coils and Portable Storage Box, 110-240V, 1000W
  • HIGH FREQUENCY MAGNETIC FIELDS: It adopts high frequency magnetic fields to heat up metal ONLY with induction heat. A flameless solution for releasing metal hardwares and components from corrosion.
  • ERGONOMIC DESIGN: The inductor is a hand-held one with slip-resist ergonomic housing; grenade style grip and a bright LED to illuminate work area; Faster and safer than traditional torch.
  • PORTABLE CONVENIENCE: Completely hand-held with light weight, ergonomic, grenade style grip and a bright LED to illuminate work area.
  • WIDE APPLICATION: Loosen seized hardware, bearings, gears, pulleys, lug nuts, in-line applications, fuel tank straps, PDR applications paint-less dent repair, etc.
  • 100% SERVICE: If you are confused about the quality of the product or have any other questions, you can email us and we will be happy to solve the problem for you. If you are not satisfied with the product or are not suitable, you can contact us, we will give you a satisfactory answer.
Rank No. #20
Aulifants – Bolt Buster Handheld Induction Heater Bolt Heat Remover Tool Kit Flameless Magnetic Car Disassembly Repair Tool of 110V 3 Coils
  • [Induction Heater] - The device is an induction heater that is used in any situation where you need heating iron parts, including bolt etc.
  • [High Efficiency] – Faster than traditional torch! Bring the coil around the frozen nut, with a wrench or socket. It usually loosens around 4 minutes!
  • [Safer & Easy to Use] – A flameless solution to release metal hardware! Easy to handle! No training!
  • [Good Warranty] – Support 30 days refund, and our worry-free 24-month warranty with friendly customer services, do not worry to buy.

Last update on 2021-11-09 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Induction Heater For Bolt Removal for our consumer to review. The reports above show ratings of the best overal, best cheap Induction Heater For Bolt Removal to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.