The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Husqvarna K3000 14 Wet Electric Concrete Saw of 2020 – Consumer Guide & Reviews

Rank No. #1
Husqvarna 966799401 K3000 Wet Electric Power Cutter
  • For the specialty contractor or rental house that needs to cut different materials indoors or in confined areas where gas shouldn't be used
  • Quick-locking of the spindle and a large outlet in the blade guard simplifies blade changes
  • Ideal for quick and easy cutting of building block, pipe, reinforcement bar, supports, etc.
  • 120 volt electric motor
  • 5-inch max cutting depth; 14-inch blade capacity - blade sold separately
Rank No. #2
XtremepowerUS 3200W 16" in Electric Cutter Circular Saw Wet/Dry Concrete Saw Cutter Guide Roller
  • The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
  • The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Water line feeds water to the blade decreasing dust and increasing blade performance and life
  • Powerful 3200W motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease
  • Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line. With the metal guard design to prevent the hurt from spark when operating
  • Used wet or dry, the dual integrated dust management system takes the dust out of the job; For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life. The tool also comes standard with GFCI built-in the cord.
SaleRank No. #3
Husqvarna K4000 Power Cutter Saw
  • Cutting depth max: 5", blade diameter max: 14"
  • Constant-flow water valve: The integrated regulator controls the water volume, ensuring a constant flow to the blade. It also ensures the amount of water is sufficient to bind the dust without creating an excess of water
  • Ergonomically designed rear handle: power cord inlet located underneath the handle enables ease of use and comfortable handling with hassle free operation
  • Increased productivity: new pop-up carbon brushes protects the collector from unforeseen rotor changes which increases reliability and enables longer service intervals
  • Easy serviceability: one-piece inspection lid and Torx screws made it easy to assemble and service
Rank No. #4
ENEACRO 1-1/4 Inch SDS-Plus 12.5 Amp Heavy Duty Rotary Hammer Drill, Safety Clutch 3 Functions with Vibration Control Including Grease, Chisels and Drill Bits with Case
  • ✔️【POWERFUL MOTOR】 12.5Amp industrial motor with 5.2 feet /lbs(7 joules)impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision. Heat resistant copper wire motor allows long working time without burning the machine. Anti-dust bottom structure extend the hammer’s use life. ENRH3203 high-performance electric rotary hammer helps to increase your efficiency and makes a better life.
  • ✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360° adjustable handle applies to different work and the upgraded double layer anti-vibration system designed to decrease the vibration effectively, and reduce fatigue. The PU soft grip handle effectively prevents sliding and brings a better and comfortable holding during use.
  • ✔️【THREE FUNCTIONS】 Three different functions of drilling(suitable for wood, steel , etc.), chiseling(suitable for concrete or brick) and hammer drilling(suitable for heavy duty work) function adapt to variety of work scenarios which are easy to switch. You can quickly switch the functions by two different switches. Compared with single function switch design, the double function switch design can extend 100% service life.
  • ✔️【DRILLING CAPACITY】 The max drilling diameter for concrete is 1-1/4 inch and for metal is 1/2 inch. ENRH3203 rotary hammer drill can reach 880 r/min no-load speed and 4350bpm max impact frequency. The sds Plus chuck allows for easy and secure bit changes to keep your project going.
  • 💪【WIDE APPLICATION】 Reliable heavy duty construction rotary hammer is suitable for professional or daily home users. The ENRH3203 rotary hammer will make it an easy job no matter remove tiles or demolishing brickwork. And it is suitable for wood, masonry, concrete, brick and metal.
Rank No. #5
Husqvarna 967682101 K 770 Gasoline Grinder , Orange
  • Easy and optimal belt tensioning: semi-automatic smart tension minimizes the risk of under- and over tensioning
  • A light, compact and powerful machine with superior power-to-weight ratio
  • Cast magnesium crankcase has a 3-bolt joint to attach the cutting head, enabling higher torsional rigidity than the previous 2-bolt solution
  • A strong poly-v belt combined with our maintenance-free durastarter and efficient filter system active air filtration ensure long service intervals
  • Cutting max depth: 5 inches
Rank No. #6
palart Brandless Lot of 10 - T25 Torx 5MM 20MM Bolt Spline Screw IS-M5x20 for 9022 371 1020
  • You are buying (10) brand new Spline Screws Replaces OEM#Stihl 9022 371 1020 Fits Models: Fits many Stihl models
Rank No. #7
Stark 3200W Electric 16" Cutter Circular Saw Concrete Wet/Dry Saw Cutter Guide Roller w/Water Line Attachment (Blade not Included)
  • ️The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
  • The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Water line feeds water to the blade decreasing dust and increasing blade performance and life
  • Used wet or dry, the dual integrated dust management system takes the dust out of the job; For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life. The tool also comes standard with GFCI built-in the cord.
  • Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line. With the metal guard design to prevent the hurt from spark when operating
  • Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease
Rank No. #8
Jigsaw, 6.7A 800W HYCHIKA Jig Saw 800-3000SPM with 6 Variable Speeds, 4 Orbital Sets, Bevel Angle 45°, 6PCS Blades, Pure Copper Motor, Laser Guide, Carrying Case Wood Metal Plastic Cutting
  • 🌟【800W MOTOR & 6 ADJUSTABLE SETTINGS】The 800W pure copper motor has great power of 800-3000SPM speed, and with six speed levels you can adjust; With 6pc blades, you can choose different saw blades according to the material (2 for metal and aluminum, 4 for wood and plastic plate).
  • 🌟 【ADJUSTABLE CUTTING ANGLE & 0-3 ORBITAL SETS】 The maximum adjustable cutting angle is -45 ° to 45 °, and the maximum cutting depth in the wood is 110 mm, in the metal 10 mm, so that different cutting angles can be set. Also with 0-3 for lifting knives, suitable for various cutting materials. The higher the gear position, the faster the cutting speed, suitable for softer materials. The lower the gear position, the slower the cutting speed, for harder materials.
  • 🌟【QUIK CHUCK & STORAGE BOX FOR BLADES】With the quick release chuck, you can change the saw blades quickly without tools; On both sides of the jigsaw are the magnetic blade storage box, they are good for storage of saw blades.
  • 🌟 【LASER GUIDE AND SCALE RULER】 Built in laser guide for the cutting direction and make the cutting precision; with guide ruler for guiding and controlling the cutting width; with lock-on button holds the trigger in place to avoid keeping finger engaged during long jobs. NOTICE: The bottom plate should be close to the cutting when cutting.
  • 🌟 【DELIVERY CONTENTS】 1 x HYCHIKA jigsaw; 6 x T-shank blades; 1 x guide ruler; 1 x user manual
SaleRank No. #9
Evolution Power Tools 14BLADEST Steel Cutting Saw Blade, 14-Inch x 66-Tooth , Blue
  • Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques
  • All offer premium quality
  • Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.
  • 1600 RPM
  • 66 Carbide Teeth, .094-Inch Kerf
SaleRank No. #10
XtremepowerUS 2800W Electric 14" Cutter Circular Saw Wet/Dry Concrete Saw Cutter Guide Roller w/Water Line Attachment (No-Blade)
  • The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
  • The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Water line feeds water to the blade decreasing dust and increasing blade performance and life
  • Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease
  • Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line. With the metal guard design to prevent the hurt from spark when operating
  • Used wet or dry, the dual integrated dust management system takes the dust out of the job; For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life. The tool also comes standard with GFCI built-in the cord.
Rank No. #11
ENEACRO 1-1/4 Inch SDS-Plus 13 Amp Heavy Duty Rotary Hammer Drill, Safety Clutch 4 Functions with Vibration Control Including Grease, Chisels and Drill Bits with Case
  • ✔️【POWERFUL MOTOR】 13Amp industrial motor with 5.5 feet /lbs(7.4 joules)impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision. Heat resistant copper wire motor allows long working time without burning the machine. Anti-dust bottom structure extend the hammer’s use life. ENRH3201 high-performance electric rotary hammer helps to increase your efficiency and makes a better life.
  • ✔️【FOUR FUNCTIONS】 Four different functions of drilling(suitable for wood, steel , etc.), chiseling(suitable for concrete or brick) ,hammer drilling(suitable for heavy duty work) function and chisel position adjustment adapt to variety of work scenarios which are easy to switch. You can quickly switch the functions by two different switches. Compared with single function switch design, double function switch design can extend 100% service life.
  • ✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360° adjustable handle applies to different work and the upgraded double layer anti-vibration system with PU soft grip designed to decrease the vibration effectively, and reduce fatigue. Aluminum alloy housing design makes the rotary hammer very sturdy and durable, even if the machine accidentally fell on the ground it will not be damaged.
  • ✔️【DRILLING CAPACITY】 The max drilling diameter for concrete is 1-1/4 inch and for metal is 1/2 inch. ENRH3201 rotary hammer drill can reach 820 r/min no-load speed and 4200bpm max impact frequency. The SDS-Plus chuck allows for easy and secure bit changes to keep your project going(Only SDS-PLUS drill bits are acceptable).
  • 💪【WIDE APPLICATION】 Reliable heavy duty construction rotary hammer is suitable for professional or daily home users. The ENRH3201 rotary hammer will make it an easy job no matter remove tiles or demolishing brickwork. And it is suitable for wood, masonry, concrete, brick and metal.
Rank No. #12
LAND 12 Inch Hacksaw - Heavy Duty Coping Saw with 4 Extra High-Carbon Steel Blade, for PVC, Pipe, Carpentry
  • 【Sharp Blade】The teeth high-carbon steel blade are poignant and tidy, making the incision smooth and the tangent line neat.
  • 【Replaceable Blade】We provide 4 replaceable blades, the extra saw blades are stored in the square tubular beam, please unscrew the screw on the beam with screwdriver to get it.
  • 【Double Sawing Angles】Hacksaw blades can be set as 45 degree or 90 degree according to the needs of self-cutting, making the work easier and more convenient.
  • 【Adjustable Tension】The tension of hacksaw blades can be changed by rotating the adjustment knob, depending on different work.
  • 【Sturdy Body】The hacksaw is made of high quality Aluminium Alloy, durable and shock resistance.If our product has any quality problems, please feel free to contact us via Amazon, and we will provide you with satisfactory after-sales service.
Rank No. #13
Evolution S355CPSL – Heavy Duty 14 Inch Metal Cutting Chop Saw W/ 14 Inch Carbide-Tipped Blade | Dry Cut Saw | Miter Saw 45° | Chop Saw For Cutting Metal – Accurate. Powerful. Reliable
  • TOUGH AND PORTABLE – With a powerful 15 Amp motor and lighter, pressed steel base the S355CPSL has all the power you expect but with the portability you need. A chip deflector directs chips away from the operator and reduces cleaning time.
  • DRY-CUT, COOL TO TOUCH, BURR-FREE CUTS – The included premium tungsten carbide-tipped blade for mild steel cutting represents the latest in dry cut technology, significantly outperforming abrasives. Virtually eliminates sparks! Cuts your metals squarely and smoothly every time providing an instantly workable finish.
  • MITER SAW 0-45° ANGLE CAPABILITY – Make angle cuts effortlessly. Features a cast steel vise and fence with quick-release mechanism for safe, accurate and fast clamping of the workpiece.
  • BLADES FOR EVERY MATERIAL – Easily fit your S355CPSL with Evolution saw blades for any material – we offer a range of mild steel, thin steel, aluminum and stainless steel cutting blades for every application.
  • 3 YEAR WARRANTY – This heavy duty metal cutting saw is extremely robust and durable, backed by our industry-leading 3 year warranty and friendly US-based customer service team.
SaleRank No. #14
Makita EK7651H 14" 75.6 cc MM4 4-Stroke Engine Power Cutter, Blue
  • Automatic engine decompression valve is engineered into the cam gear to reduce pull-start force by 40%
  • Pressure compensated carburetor with vented choke plate allows for optimum fuel delivery and reduces the occurrence of flooding during cold starts
  • Integrated all aluminum wheels reduce fatigue during long straight cuts and retract when not in use to prevent unexpected movement
  • Eliminates the need for separate mixed oil/fuel can
  • Lower noise at 92.7dB(A) and smoother idle for continuous operation
Rank No. #15
XtremepowerUS 2600W Electric 14" Disc Cutter Circular Saw Concrete Saw Power Angle Cutter Wet/Dry Circular Blade w/Guide Roller
  • The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
  • The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Water line feeds water to the blade decreasing dust and increasing blade performance and life
  • Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease
  • Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line. With the metal guard design to prevent the hurt from spark when operating
  • Used wet or dry, the dual integrated dust management system takes the dust out of the job
Rank No. #16
XtremepowerUS Electric 14" Cut Off Saw Wet/Dry Concrete Saw Cutter Guide Roller with Water Line Attachment 2800W (with 14" Blade)
  • The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity
  • Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease
  • Extraction dust port can vent the cutting debris timely, help you clear the cutting surface, for you to keep the cutting line free of dust all the time, and also give you a clear view of the cutting line. With the metal guard design to prevent the hurt from spark when operating
  • The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Water line feeds water to the blade decreasing dust and increasing blade performance and life
  • Used wet or dry, the dual integrated dust management system takes the dust out of the job; For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life. The tool also comes standard with GFCI built-in the cord.
Rank No. #17
Husqvarna K770 + 1 Shark Blade
  • 14", 5 hp Gas Power Cutter
  • Features SmartCarb filter system
  • Equipped with new generation Active Air Filtration
  • Outfitted with an X-Torq engine
  • Ideal for cutting concrete and stone in alterations, renovations, and new construction.
Rank No. #18
Mini Circular Saw, TECCPO 4.8Amp, Compact Circular Saw, Laser Guide, Hand Saw, 3700 RPM, 3-5/16” Circular Saw, Scale Ruler, Pure Copper Motor, Ideal for Wood, Soft Metal, Tile & Plastic Cuts - TAPS22P
  • [ POWERFUL COPPER MOTOR & COMPACT SAW ] - 580W/4.8Amp powerful copper motor provides 3700RPM No-Load Speed to smoothly cut wood, metal, tile, aluminum and plastics in a single pass. Copper motor delivers less heat than general copper-clad aluminum motor to drastically extend your saw’s lifetime.
  • [ 3 BLADES & ADJUSTABLE CUTTING DEPTH ] - The 24T TCT Blade for wood, 44T HSS Blade for plastic & soft metal and grit diamond blade for tile are specifically set to extend the application of the mini circular saw, suitable for straight cutting with large cutting depth of 1-1/16” for wood; 5/16” for tile; 1/8” for Aluminum. Easy-set depth gauge lever for adjustable cutting depth from 0-27mm.
  • [ PRECISE LASER GUIDE & SAFE DESIGN ] - Legible laser guide and 7” scale ruler can assist you to cut a precise straight line. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case any accidental start up. Grip with integrated safety trigger for safer control.
  • [ LIGHTWEIGHT & ERGONOMIC DESIGN ] - This mini circular saw weighs only 5.25 lb, which can be a good addition to your toolkit. Optimized ergonomic rubber grip provides ease and less fatigue to one-handed operation. The 15.75 inches vacuum adapter allows connection to your vacuum, preventing you from the inhalation of dust. Maintain a cleaner working environment.
  • [ BUY WITH CONFIDENCE ] - Box includes 1 x 3-3/8” TECCPO mini circular saw, 1 x 24T Carbide-tipped Blade for wood, 1 x 44T HSS Blade for soft metal, 1 x 3-3/8” Diamond Blade for tile , 2 x Cells for Laser Guide, 1 x Parallel Guide, 1 x Vacuum Adapter, 1 x Allen Key and 1 x Quality Promise Card. TECCPO offers 24-month Quality Promise for all products. If you have any questions, please do not hesitate to contact us.
SaleRank No. #19
SKIL 5 Amp Corded Jig Saw- JS313101
  • HIGH CUTTING EFFICIENCY – The 4-stage orbital function allows smooth cutting ability across different materials and applications.
  • SPEED CONTROL & BRAKE – Variable speed control provides optimal cutting speed for all applications while the brake function is helpful for a precise finish.
  • ANGLED CUTTING – The shoe bevel adjustment allows you to cut at angles.
  • CLEAR VIEW PRECISION – An on/off dust blowing switch gives a clear view of your work, so you can easily track the cutting line.
  • EASY BLADE CHANGE – Replace saw blades quickly with the tool-free blade clamp.
Rank No. #20
Steel Force KPC 3551 Portable 14" Wet/Dry Electric Corded Circular Concrete Saw/Power Angle Cutter 2600W w/Water Line & Guide Roller (With Blade)
  • Powerful 15 Amp concrete saw enables smooth and accurate cutting
  • Water line and dust extraction port – easy to get rid of debris and reduce dust/noise
  • Versatile applications- cuts through granite, porcelain, or concrete at 4,300 RPM speed
  • 1/2" and 3/4" water hose adapters included
  • Included one 14" General Purpose Segment Diamond Saw Blade

Last update on 2021-10-03 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Husqvarna K3000 14 Wet Electric Concrete Saw for our consumer to review. The reports above show ratings of the best overal, best cheap Husqvarna K3000 14 Wet Electric Concrete Saw to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.