The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Honda Del Sol Piston Return Springs of 2020 – Consumer Guide & Reviews

Rank No. #1
Apexstone 80N/18lb Gas Strut,Gas Spring,Lid Support,Gas Shocks,Lift Support,Lid Stay,Set of 2
  • Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
  • Force:18 Lbs(Per Strut),Length (Center-to-Center):7 inch(180 mm),Compressed Length (Center-to-Center):5.12 inch(130mm)
  • Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉
  • Package included: 2 X 80N 7 Inch Gas Strut and 10 X Screws
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
SaleRank No. #2
Five Bananas Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool with 2 pcs Steel Plates, Red
  • 🍌The brake caliper press is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches. Work of Single, Double, and Four Side Piston Brake.
  • 🍌Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • 🍌Ideal for most large trucks and commercial vehicles with quad piston calipers.Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.
  • 🍌The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”
  • 🍌 Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first before you have any problem, we promise will provide the best solutions.
Rank No. #3
LKXHarleya 6pcs Throttle Return Spring Kit Carburetor Spring Assortment Governor Link Rod Speed Control Spring for Honda GX140 GX160 GX200
  • Perfectly fit for Honda GX140, GX160, GX200 5.5hp 6.5hp.
  • These rod and springs are made of high-quality metal material, sturdiness and durability, high stability and long using life.
  • Engines and Chinese generators equipped with 168F gasoline engine.
  • Having properties of excellent quality and fine workmanship, very easy to use and install.
  • Package is included 2pcs governor rods, 2pcs speed control springs and 2pcs throttle return springs.
Rank No. #4
Throttle Pedal and Brake Return Springs 9502 and 9503 Compatible with Manco/American Sportworks
  • This is for one each return brake spring and return throttle spring.
  • It is commonly used on Manco and American Sportworks go-karts.
  • Bright zinc plating looks good and prevents corrosion.
  • This spring is the exact replacement for Manco/American Sportworks
  • Throttlepedal return spring and Brake pedal return spring
Rank No. #5
labwork Driver & Passenger Targa Top Roof Lock Handle Set Replacement for Honda Del-Sol 1993-1997 85265-SR2-000ZA 85215-SR2-000ZA
  • Replacement for 1993-1997 Honda Del-Sol
  • Manufacturing Part Number: 85265-SR2-000ZA, 85215-SR2-000ZA
  • Size: 4.33 x 1.57 x 1.57
  • Made of premium ABS plastic material for durable use
  • Driver and passenger top roof lock handle replacement
SaleRank No. #6
NEIKO 50456A Spring Assortment Set | Zinc Plated Compression and Extension Springs | 200 Piece
  • [DURABLE]: Flexible spring coils are made from #75 zinc plated steel that provides extra durability for the right amount of tension.
  • [VERSATILE]: Set includes a wide range of sizes and has 200 pieces for shop and home repairs.
  • [COMPRESSION SPRING SIZES]: 9/32" x 1/2", 1/4" x 13/32", 7/32" x 11/16" , 3/8"x 5/8", 3/8" x 3/4",9/32" x 3/4", 23/64" x 1-3/8", 7/32" x 1-1/2".
  • [EXTENSION SPRING SIZES]: 13/64" x 13/16", 7/32" x 1", 1/4" x 7/8", 5/16" x 1-1/8",5/16" x 1-1/4", 5/16" x 1-3/4".
  • [CONVENIENCE]: Includes plastic storage case for easy organization and size chart label to identify spring sizes.
Rank No. #7
PAGOW 12PCS Throttle Return Spring Kit, Governor Rod Spring Assortment Throttle Return Spring Link Rod Set, for Honda GX140 GX160 GX200
  • HIGH QUALITY MATERIAL: All these return spring kits are made of superior metal material, which is sturdy and flexible, ensures long product lifespan.
  • PROFESSIONAL CRAFT: Our products are made through standard industrial procedures, qualified to OEM standard, which confers our products stable performance and high reliability.
  • EASY TO INSTALL: Due to the premium material and mature craftsmanship of our products, It is easy to install them on, as long as you follow the guidebook step by step.
  • APPLICATIONS: Our products are suitable for Honda GX140, GX160, GX200 5.5hp 6.5hp engines.
  • PACKAGE CONTAINS: 4 sets throttle return spring assortment kits, including 4 governor rods, 4 speed control springs and 4 throttle return springs
Rank No. #8
Spectre Performance 4700 Throttle Return Spring
  • Inner and outer coil configuration
  • Spring steel wire construction
  • Fast return response
  • Easy to install with no special tools or skills required
Rank No. #9
Apexstone 100N/22.5lb Gas Strut,Gas Spring,Lid Support,Lift Support,Lid Stay,Gas Props/Shocks,Set of 4
  • Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
  • Pressure:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"
  • Support opens lids to a maximum angle of 100 degrees.Available working temperature :-10℃~50℃/14℉-122℉
  • Package included: 4 X 100N 10 Inch Gas Strut and 20 X Screws
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Rank No. #10
Apexstone 45N/10lb 10 inch Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas Shocks,Lid Stay,Lid Support
  • Lids soft open gently,Ideal for supporting the lid to keep it open
  • Pressure:45N/10lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"
  • Support opens lids to a maximum angle of 100 degrees
  • Instructions Included, Screws Included
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Rank No. #11
100pcs - 10mm Nylon Clips Plastic Push Type Rivet Retainer Fastener Bumper Pin Fender Flare Compatible with Honda Acura
  • Material: Black nylon
  • Stem Length: approximate 13 mm
  • Fit into 10mm hole
  • Replace No Acura: 91503-SZ3-003 | Honda: 91503-SZ3-003
  • Package included: 100X Clips
SaleRank No. #12
Honda 16592-ZE1-810 Spring Genuine Original Equipment Manufacturer (OEM) Part
  • HONDA 16592-ZE1-810 F401 F501 FC600 FR600 FR650 FR750 GX110 GX120 GX140 GX160 GX200 GX140 GXV270 GXV340 HP520 HS624 HS724 HSS724 HT-R3009 WDP20 WDP30 WMP20 WP20 WP30 engine Control Lever CABLE RETURN SPRING New OEM
  • HONDA 16592-ZE1-810 F401 F501 FC600 FR600 FR650 FR750 GX110 GX120 GX140 GX160 GX200 GX140 GXV270 GXV340 HP520 HS624 HS724 HSS724 HT-R3009 WDP20 WDP30 WMP20 WP20 WP30 engine Control Lever CABLE RETURN SPRING New OEM
  • HONDA 16592-ZE1-810 F401 F501 FC600 FR600 FR650 FR750 GX110 GX120 GX140 GX160 GX200 GX140 GXV270 GXV340 HP520 HS624 HS724 HSS724 HT-R3009 WDP20 WDP30 WMP20 WP20 WP30 engine Control Lever CABLE RETURN SPRING New OEM
SaleRank No. #13
Dalom GX160 Carburetor + Recoil Starter + Ignition Coil + Air Filter Tune Up Kit for GX140 GX 160 GX168 GX200 5HP 5.5HP 6.5HP Engine
  • For GX140 GX 140 GX160 GX 160 GX168 GX 168 GX200 GX 200 5HP 5.5HP 6.5HP Engine
  • Carburetor replace # 16100-ZH8-W51 16100-ZH8-W61 16100-ZE1-814 16100-ZE1-825
  • Specification: mounting hole center to center: 42mm, core hole: 19mm, choke hole: 24mm
  • Recoil starter replaces 28400-ZE1-003ZF, 28400-ZH8-013YA, ignition coil replaces 30500-ZE1-033, 30500-ZE1-063, air filter replaces 17210-ZE1-505
  • Comes with 1 carburetor,1 recoil starter,1 ignition coil,1 air filter,l fuel gas tank joint filter,1 choke level,1 spark plug,3 gasket,1 oil sensor,1 three cable switch,1 spacer
Rank No. #14
Apexstone 200N/45LB 10 inch Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas Shocks,Lid Stay,Lid Support
  • Force:200N/45lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8",Set of Two in the Package.NOT SOFT CLOSE GAS STRUT!!!
  • 45 lb Gas Shocks Perfectly suitable for truck toolbox lid, RV door, cabinet lid, bed with storage,and other DIY projectsWidth).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉
  • Lids soft open gently,Ideal for supporting the lid to keep it open,Support opens lids to a maximum angle of 90 degrees,it fit for the door/lid which the WIDTH is Less than 20 inch , the WEIGHT is between 45 and 90 lb
  • Package included: 2 X 200N Gas Strut and 10 X Screws
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately DOA or our 45 LBS GAS STRUT did not work well ,please kindly contact us for exchange, refund or return Bullet Point
Rank No. #15
APDTY 60318 Throttle Return Spring Assortment
  • Brand New Throttle Return Spring Assortment (4 Pcs)
  • Allows Replacement of the Original Throttle Return Spring
  • Includes: 2 Silver Springs 4 in, 2 Black (Dual Spring Design) 4 in & 2.5 in
Rank No. #16
Apexstone 2pcs 300N/67LB 15inch Gas Spring/Prop/Strut/Shock/Lift Support with L-type Mounts
  • FORCE:67 Lbs/300 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes' Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉
  • SET OF 2 IN THE PACKAGE:It could hold open 67 lb individually or together for around 134lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.
  • INSTRUCTIONS&SCREWS NOT INCLUDED In the package,While you can feel free to Click "Ask Seller" Besides Your Order for In-time Assistance
  • HOW TO INSTALL&ADJUST IT:As the Upper Mounting Point ,it should be 4-5 inch,5.5 inch maximum towards the hinge on the lid.While If you want to adjust the Upper Mounting Point,just do as the Product Descripition shown ,or Click "Ask Seller" Besides Your Order for In-time Assistance
  • 100% SATISFACTORY WARRANTY: We offer 1 year 100% satisfactory warranty,if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return
Rank No. #17
68MM Piston Ring Connecting Rod Engine Full Gasket Set for Honda GX160 GX 160 5.5HP 4-Cycle Gas Engine Generator Water Pump
  • For HONDA GX160 5.5HP 4-Cycle Gas Engine Generator Water Pump
  • Refer to Part No. For 13101-ZF7-010, 13101-ZH8-010, 91201-Z0T-801, 13200-Z0T-800
  • Piston Size: 68MM
  • Package Include: 1 x Piston, 1 x Pin, 5 x Piston Ring, 2 x Circlip, 1 x Valve Gasket, 1 x Cylinder Gasket, 3 x Carb Gasket, 1 x Muffler Gasket, 1 x Crankcase Gasket
  • Welcome To Contact With Us Before Or After Your Purchase. Our Warm & Responsible Customer Service Always Be Here For You
SaleRank No. #18
C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)
  • βœ… ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!
  • βœ… ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!
  • βœ… C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
  • βœ… ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds;
  • βœ…100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!
SaleRank No. #19
Dorman Help! 29016 Spring Assortment
  • Product Type:Auto Part
  • Item Package Weight:0.114 Kilograms
  • Item Package Dimension:3.3 cm L X4.3 cm W X28.2 cm H
  • Country Of Origin: China
Rank No. #20
Governor Rod Spring Throttle Return Spring Link Rod Set for BlackMax 208CC/212CC 6HP/7HP 3000/3500/3600/3650/4375/4500 Watt Gasoline Generators
  • Premium Governor Spring, Link Rod & Rod Spring Set for BlackMax Branded 208CC/212CC 6HP/7HP 3000/3500/3600/3650/4375/4500 Watt Gasoline Generators.
  • Package Includes: 1 X Governor Spring, Link Rod & Return Spring Set.
  • Part Number: EZ-16063-Z010X10-GSR. It is compatible with Blackax parts# 16012-Z010110(Throttle Valve Return Spring), 16062-Z010210(Governor Rod) & 16063-Z010310(Governor Spring).
  • Package Includes: 1) Governor Rod, 2) Governor /Speed Control Spring, 3) Governor Rod/Fuel Throttle Return Spring
  • High quality products with competitive price, fast delivery and good service, free shipping and fulfilled by Amazon.

Last update on 2021-07-19 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Honda Del Sol Piston Return Springs for our consumer to review. The reports above show ratings of the best overal, best cheap Honda Del Sol Piston Return Springs to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.