The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Headers For 57 Vortec of 2020 – Consumer Guide & Reviews

Rank No. #1
K&N Cold Air Intake Kit: High Performance, Increase Horsepower: Compatible with 2001-2007 CHEVROLET/GMC (Silverado 2500 HD, 2500 HD Classic, 3500, 3500 Classic, Sierra 2500, 3500)57-3030-1
  • Estimated horsepower gain of 17.31 HP at 4559 RPM
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Easy to install, usually in 90 minutes or less
Rank No. #2
K&N Cold Air Intake Kit: High Performance, Increase Horsepower: Compatible with 2001-2007 Chevy/GMC Heavy Duty (Silverado 2500, Silverado 3500, Sierra 2500, Sierra 3500) 6.0L V8, 57-3031-1
  • Estimated horsepower gain of 20.34 HP at 4894 RPM
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Easy to install, usually in 90 minutes or less
Rank No. #3
BLACKHORSE-RACING Stainless Steel Exhaust Headers Pipe Compatible with 1955-1957 SBC Small Block Chevy Bel Air
  • ▲ This listing is for a set of brand new Stainless Steel 1955 1956 1957 Small Block Chevy Chassis headers. These headers allow you to keep the exhaust system under your '55-'57 Chevy car. The "3/4-length" design provides more ground clearance than full-length headers, yet makes more power than "shorty" style headers. These chassis headers fit 283-400 SB Chevy V8's.
  • ▲ Fits cars using an original V-8 pitman arm (some aftermarket arms may cause an interference),Fits standard and Vortec-style small-block Chevy heads (not D-port, LT-1 or ZZ-4),Does not work with stock clutch linkage
  • ▲ Package including: 1 X Set of Header Exhaust Kit
  • ▲ Compatible with: 1955-1957 283-400 S/B Chevy V8s
  • ▲ Thanks for your encouraging review and feedback! It really increases our service level and passion of work! Incase you meet problem with our products, please contact us first before you give feedback and review. We will assure you will get the best solution and service.
SaleRank No. #4
K&N Cold Air Intake Kit: High Performance, Increase Horsepower: 50-State Legal: Compatible with 1999-2004 Chevy/GMC (Silverado 1500, Sierra 1500) 4.8L and 5.3L V8,57-3021-1
  • Estimated horsepower gain of 9.12 HP at 5352 RPM
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Easy to install, usually in 90 minutes or less
SaleRank No. #5
9345-D DiabloSport Trinity 2 EX Platinum
  • For 2014 and Earlier Chrysler Vehicles
  • Performance Tuning Capabilities
  • Fully Customizable Display
  • CMR Compatible
  • For Competition/Race Use Only
SaleRank No. #6
Schoenfeld Exhaust Truck Headers GM LS-Series P/N 1302LS1
  • SCHOENFELD Truck Headers GM LS-Series P/N 1302LS1
Rank No. #7
DNA Motoring GKTSET-SBC-TR15 Aluminum Exhaust Manifold Header Gasket Set Replacement
  • Aluminum Reinforced Graphite Exhaust Manifold Gasket
  • Complete Hardware Kit for Installing Aftermarket Header to your Vehicle
  • Great for Replacement of Missing or Damaged Gaskets
  • 100% Brand New
  • Installation Instruction is NOT Included
Rank No. #9
Gibson GP129S Stainless Steel Performance Header
  • 1 5/8 in. Tubing; w/o Air Injection; w/o EGR Incl. Flanges/Gaskets
  • Direct Fit bolt-on Replacement, No Welding Required, Uses OEM Style Connections
  • Direct Fit bolt-on Replacement, No Welding Required, Uses OEM Style Connections
  • Heavy Duty Laser Cut Port Flanges-No Warping or Leaking Premium Gaskets and Hardware
  • Will Not Affect the Factory Warranty. Meets EPA and Carb Requirements
Rank No. #10
LucaSng LS Turbo Headers For LSX, LS1, LS2, LS3, LS6 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Engine Forward Facing Up 1 3/4" Primaries,For 1997-2014 Chevy Small Block
  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response ;3” collector for maximum strength and exhaust flow.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory coil locations. It is also not recommend due to heat & clearance. Note: These are universal turbo headers and are not designed to work with any specific application or accessory.
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014
Rank No. #11
Exhaust Headers LS Hugger Headers Swap Conversion Compatible with 1923-1954 Cadillac Cars 1958-1964 Chevy Impala Biscayne Bel Air Corvette Nomad V8 Engines LS1 LS2 LS3 LS6 4.8L 5.3L 5.7L
  • ♐ Full 1 5/8" Primaries, 2 1/2" Collector, Gains over 18+ rwhp
  • ♐ Mandrel Bent Tubing, CNC Machined Flanges, Standard Graphite Manifold Gaskets
  • ♐ Made of polished 304 stainless steel construction for great quality and performance
  • ♐ V8 Engines Only. For LS series engine swaps only. These do not work on standard SBC or BBC
  • ♐ Fitment:1923-1954 Chevy Cars & Trucks, 1923-1954 Cadillac Cars, 1958-1964 Chevy Impala & Biscayne, 1950-1964 Chevy Bel Air, 1953-1967 Chevy Corvette, 1955-1961 Chevry Nomad
SaleRank No. #12
DNA Motoring HDS-CAD04 Stainless Steel Exhaust Header Manifold
  • Made of high quality T-304 Stainless Steel material
  • Inlet/ outlet: 1-3/4" OD mm/ 3" OD mm
  • 4-1 full length header design
  • TIG welded CNC machine flanges; O2 sensor bung included
  • Increase high flow air, instantly gain 10 -15 HP./ TQ.
Rank No. #13
SCT Performance - 40490 - BDX Performance Tuner and Monitor - Diagnostic Preloaded and Custom Tuning
  • CUSTOM TUNING - Arrives pre-loaded with Dyno proven performance tune files & holds up to 20 custom tuning files for Maximum tune flexibility. Stores your vehicles factory tune file for easy restoration back to the stock program
  • CLOUD DELIVERY - Download updates and tunes from over Wi-Fi. Seamlessly matches your vehicle with available preloaded or custom tunes and settings that are available.
  • DATA OVERLOAD - Read and record real time stats & parameter effectiveness on a full color display.
  • HEADS UP DISPLAY - Monitor your performance at a glance with a dynamic color display mounted to the pillar, window, or dash.
Rank No. #14
DiabloSport 8245 inTune i3 Platinum Performance Programmer 3rd Generation inTune inTune i3 Platinum Performance Programmer
  • DiabloSport 8245
  • This product will not work on Hybrid or E-Assist vehicles.
  • 8245 Platinum is for GM allow custom tunes
Rank No. #15
K&N Cold Air Intake Kit: High Performance, Increase Horsepower: 50-State Legal: Compatible with 1996-2000 Chevy/GMC (C2500, C3500, C35, K2500, K3500, Suburban, Tahoe, Yukon, C1500, K1500) 57-3013-2
  • Estimated horsepower gain of 9.48 HP at 4918 RPM
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Easy to install, usually in 90 minutes or less
Rank No. #16
Stainless Steel Truck Headers Fits for Chevy GMC C/K 5.0L 5.7L 305 350 V8 1988-1997 HDCGMC85T2
  • FITMENT - Replacement Exhaust Pipe Manifold for 1993-1994 Chevrolet Blazer 1989 1991-1995 Chevrolet C1500 1992 1994-1995 Chevrolet C1500 Suburban 1989-1992 1994-1995 Chevrolet C2500 1992 1994-1995 Chevrolet Compatible with HDCGMC85T2 Pipe
  • ADVANTAGE - Exhaust Manifold with Cast Iron tubular construction has strong anti-corrosive; Cast Iron tubular construction can protects against warping or cracking, leak-resistant for long-lasting performance
  • FEATURES - Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. A rigorous quality inspection has been taken to ensure it conforms to product standards
  • PACKAGE- 1*Exhaust manifold Kit (hardware as the listing shown)
  • NOTICE - Please check the description and compatibility chart before your purchasing. Please contact us if you have any question
Rank No. #17
ECCPP Exhaust System J1HDNP024 Replacement Exhaust Manifolds Fit for 2002-2013 Cadillac Escalade 2003-2013 Cadillac Escalade ESV 2003-2013 Cadillac Escalade EXT 2007-2013 Chevrolet Avalanche
  • APPLICABLE VEHICLES:High quality exhaust system fit 07-16 GMC Sierra 3500 HD/2500 HD/Chevrolet Silverado 3500 HD/ 2500 HD/07-13 Chevrolet Avalanche/07-09 Hummer H2
  • RECOMMENDED USE:SDD-J1HDNP024 replacement direct fit product
  • FUNCTIONS: Increasing the rates of engine conversion; Reducing fuel consumption;Extending the life span of the exhaust pipe;Able to be applied in rain and snow;High temperature-resistant
  • ADVANTAGES: High quality, high performance; Can be accelerated rapidly; Energy-saving, high quality
  • WARM TIPS: Please check part number and fitment informations to verify this is the correct you need before ordering
Rank No. #18
Exhaust Header OCPTY Shorty Engine Conversion Swap Truck Stainless Steel Header for Chevy GMC Trucks LS1 LS2 LS3 C-10 LS Pickups
  • MODELS - Exhaust manifolds for 2002 Chevrolet Blazer 4.2L 1983 1984 Chevrolet S10 Blazer 2.0L 1987 1988 1989 1990 1991 GMC Jimmy 5.7L 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 GMC Jimmy 6.2L 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 GMC Sonoma 2.2L 1991 1992 1993 GMC Sonoma 2.5L 1991 1992 1993 GMC Sonoma 2.8L 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 GMC Sonoma 4.3L 1991 1992 1993 1994 1996 1997 1998 1999 2000 2001 Oldsmobile Bravada 4.3L
  • Features include - Mandrel Bent Tubing+Full 1 5/8" Primaries +2 1/2" Collector+V-Band Collector Construction+Collector Merge Spikes+Port Matched Flanges
  • PERFORMANCE - The OCPTY exhaust manifolds was constructed with cast iron or stainless tubular, which has superior sealing features, prevent against cracking and warping deteriorating under tremendous heat and pressure, what's more, it's not easy to rust and corrode under chemical environment and has excellent creep resistance
  • DIRECT FIT - Guaranteed to fit and meet the quality standards of the original parts being replaced. Since the products are suitable for special fields, we strictly tested them before they leaving the factory
  • WARM TIPS - Please check the original equipment part numbers and the application for the replacement, buy the right one you need
Rank No. #19
JEGS 30059 Painted Long Tube Headers | Big Block Chevy 396-454 | 454 Chevy | Black Steel BBC Headers for Suburban Blazer Jimmy GMC | 1968-1991 2WD 4WD
  • INCREASE HORSEPOWER & TORQUE ON BIG BLOCK CHEVY with JEGS Painted Long Tube Headers designed for a perfect fit on Chevy Blazer/Jimmy 1968-1987 2WD, 1973-1981 4WD & Suburban 1973-1991 2WD, 1973-1981 4WD
  • PRECISION FIT FOR YOUR BBC. JEGS Painted Long Tube Headers are performance-tested against leaks for increased hp, improved throttle response, and fuel economy at various RPMs.
  • UPGRADE YOUR CHEVY TRUCK'S PERFORMANCE with optimum exhaust flow to reduce back pressure and improve oxygen intake.
  • EASY TO INSTALL BBC HEADERS are designed to ensure your entire flange surface is flat for maximum gasket seal; full-length reducers, gaskets, and bolts/studs included.
  • PREMIUM QUALITY, HIGH-STRENGTH STEEL Long Tube Headers are crafted with JEGS’s advanced welding process for maximum durability and rigidity; coated in matte black to match your trim.
Rank No. #20
Header Set 1 5/8" Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion Shorty Headers for 2010-2015 Chevy LS1 LS2 LS3 LS6 LS7 SUV, Camaro Chevelle, Nova, Firebird Truck
  • Fitment: Fitment: for 2010-2015 Chevy LS1 LS2 LS3 LS6 LS7 SUV (camaro, chevelle, nova, firebird) Truck LS LT SS Z/28 ZL1 3.6L 4.8L, 5.3L, 5.7L, 6.0L, 6.2L Engines (Not fit Camaro with Rear Steering Gear Box)V8 engines only.
  • With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses from each of the cylinders, it can create a reduction in cylinder backpressure and improved exhaust gas velocity. Standard size suit for direct replacement and installation.
  • Precision machined steel flanges that provide a tight seal at the head and allows a high flow rate through the primary tubes
  • Better air flow design, improves exhaust velocity performance, offers great flow and higher power,leak-resistant for long-lasting performance
  • Before you place your order, please check the compatibility table in the upper left corner and page description carefully to ensure that it is suitable for your car.

Last update on 2021-06-23 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Headers For 57 Vortec for our consumer to review. The reports above show ratings of the best overal, best cheap Headers For 57 Vortec to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.