The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Head Gasket Ford 60 Diesel of 2020 – Consumer Guide & Reviews

Rank No. #1
K-Seal ST3501 Pour and Go Permanent Head Gasket and Block Repair
  • Just Pour & Go – No Need for Expensive Head Gasket Repairs - The Safe and Easy Way to Fix a Coolant Leak
  • Fixes blown head gaskets, cracked heads and blocks
  • A permanent repair, guaranteed for the lifetime of the engine
  • Scientifically Tested - K-Seal is the only product to have been successfully tested by the equipment at Brighton University and classes as meeting the demands of ASTM D3147
  • If product did not seal head gasket leak, the system might be Over-pressurized, which causes back pressure and doesn't allow the product to reach the problem area, on this page below under Technical Specification is a PDF Guide with instructions to follow to complete the repair successfully
Rank No. #2
Bar's Leak HG-1 HEAD SEAL Blown Head Gasket Repair
  • Repairs blown head and intake gasket leaks
  • Seals cracked cylinder heads and blocks
  • Stops heater core and radiator leaks
  • Fixes leaking freeze and core plugs
SaleRank No. #3
Fel-Pro ES72173 Cylinder Head Bolt Set
  • Meets or exceeds all original equipment specifications
  • Application-specific design ensures a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
Rank No. #4
Head Stud Replacement Kit for 1998.5-2018 Dodge Cummins 5.9L 6.7L Diesel Cylinder 24V | Installation Instructions & Assembly Lubricant Included CP876
  • DIRECT FIT REPLACEMENT - Fits 1998.5-2018 Dodge Cummins 5.9L 6.7L Diesel Cylinder 24V Models. Engineered to unleash more performance out of your vehicle. Centerless ground to assure perfect concentricity. Please see vehicle compatibilities above to ensure accurate fitment.
  • ULTRA STRENGTH - XOTIC 7200 material properties allow for far greater tensile strength compared to 8740 chromoly steel head studs. Rated at 220,000 psi tensile strength. Threads rolled after heat treatment for optimum fatigue strength. Ample clamping strength prevents cylinder heads from lifting.
  • EASY INSTALLATION - Broached stud ends install & make cylinder head removal easier. Installation manual is included with drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard head bolts.
  • KIT INCLUDES - 26x Heads Studs, 26x Nuts, 26x Hardened Parallel Washer, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings.
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied. Rigorous quality inspections are undertaken to ensure premium product standards.
Rank No. #5
Fel-Pro 9333 PT-1 Cylinder Head Gasket
  • PermaTorqueMLS head gaskets are built to meet or exceed all original equipment specifications
  • Application-specific design ensures a perfect fit
  • Requires no retorquing of head bolts
  • Manufactured for the repair environment
  • Unsurpassed quality you can trust
Rank No. #6
Jet Diesel Gasket Fuel Filter Head Primer Seal Rebuild Kit and Air Bleeder Screw Compatible with 2001-2013 Fuel Filter Housing Brass Screw for Duramax
  • FITMENT: All the 2001-2013 6.6L GM Duramax fuel filter primer
  • PACKAGE INCLUDES: 1 x Billet Brass Bleeder Screw, 2 x Nitrile Plunger U-Cups, 4 x Viton O-Rings.
Rank No. #7
MAHLE Original 54450A 6.0L Ford Power Stroke Cylinder Head Gasket
  • MAHLE Original gaskets provide world class sealing products trusted by OEMs & Technicians around the globe
  • All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE Original gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Rank No. #8
Fel-Pro FS 7733 PT-2 Full Gasket Set
  • Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
Rank No. #9
ARP 1543601 Head Bolt Complete Set
  • Fits small block Ford only
Rank No. #10
FEL-PRO 1010 Head Gasket
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL -- Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Rank No. #11
Bar's Leaks 1100 Head Gasket Repair - 20 oz.
  • Stops block leaks
  • Seals cracked cylinder heads and blocks
  • Repairs blown head gaskets
  • Dual Action 2 Part Formula — LIQUID CERAMIC: Liquid penetrates large and small leaks to form a seal actually harder than the original head gasket — REINFORCED FIBERS: Fiber additives lock together with liquid to increase strength and promote a permanent seal
  • Head Gasket Sealant is NOT COMPATIBLE with antifreeze and must only be added to the cooling system after ALL ANTIFREEZE has been flushed and removed.
SaleRank No. #12
FEL-PRO 26374 PT Head Gasket
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
  • MULTI-LAYERED STEEL CONSTRUCTION -- Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Rank No. #13
6.0L Head Stud Replacement Kit for 2003-2007 Ford PowerStroke Diesel Cylinder | Installation Instructions with Assembly Lubricant Included CP874
  • DIRECT FIT REPLACEMENT - Fits 2003 2004 2005 2006 2007 F-250 F-350 F-450 F-550 & 2004-2005 E-350 CLUB WAGON & EXCURSION 6.0L Diesel Ford Powerstroke Models. Engineered to unleash more performance out of your vehicle. Centerless ground to assure perfect concentricity. Please see vehicle compatibility above to ensure accurate fitment.
  • ULTRA STRENGTH - XOTIC 7200 material properties allow for far greater tensile strength compared to 8740 chromoly steel head studs. Rated at 220,000 psi tensile strength. Threads rolled after heat treatment for optimum fatigue strength. Ample clamping strength prevents cylinder heads from lifting.
  • EASY INSTALLATION - Broached stud ends install & make cylinder head removal easier. Installation manual is included with drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard Ford head bolts.
  • KIT INCLUDES - 20x Heads Studs, 20x Nuts, 20x Hardened Parallel Washers, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings.
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied. Rigorous quality inspections are undertaken to ensure premium product standards.
Rank No. #14
DNJ HGS3109 Graphite Head Gasket Set/For 1987-1995/ Avanti, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac/Blazer, Brougham, C1500, C2500, Caballero, Camaro, Caprice, Custom Cruiser, El Camino
  • THIS IS BRAND NEW: DNJ® Head Gasket Set
  • FITS: 87-96 Chevrolet, GMC 5.0L V8 OHV Naturally Aspirated
  • FITMENT NOTES: Premium Sealing Solution, Valve Grind Set
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks.
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run
SaleRank No. #15
FEL-PRO 26415 PT Head Gasket
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • UNIQUE COMBUSTION SEAL -- Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION -- Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
  • HANDLES EXTREME ENGINE CONDITIONS -- Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
Rank No. #16
Cylinder Head Gaskets 12622033 Set Replacement for LS9 LSA engines and LS2 LS3 and 6.0 iron blocks ls3 head gasket
  • 🚘Part Number: 12622033, (Please verify this is the right part number before ordering);
  • 🚘Direct replacement for a proper fit;
  • 🚘Replacement for LS9 LSA engines and LS2 LS3 and 6.0 iron blocks;
  • 🚘Includes all the parts in the pictures;
  • 🚘If you have any question or any unsatisfactory about the product, you can contact our customer service at any time, our team will response you in 24 hours;
Rank No. #17
Evergreen HSHB8-10448L Cylinder Head Gasket Set Head Bolt
  • Our seals and gaskets are designed to meet or exceed all Original Equipment (OE) specifications for proper sealing
  • Advanced manufacturing technology ensures durability and optimum operation
  • Specialized designs yield significant and noticeable improvements to your car engine
  • Engineered and manufactured specifically for aftermarket repairs or "do it yourself" projects
  • Application-specific design ensures correct fitment
Rank No. #18
NIMTEK Engine Valve Gasket Cylinder Head Gasket Set for Briggs & Stratton 694013 499890 693997
  • NIMTEK Aftermarket Engine Gasket Full Set.
  • Replaces Briggs & Stratton and Electrolux Part Numbers: 694013 499890 693997.
  • Fits Many Briggs & Stratton Engine Models: 405777, 406777, 407677, 407777, 441777, 442577, 445577, 445677, 445777, 445877, 445977, 446677, 446777, 44677A, 446877, 446977;
  • 40F777, 40G777, 40H777, 40R777, 40R877, 40S777, 40S877, 40T677, 40T876, 40T877, 44H777, 44K777, 44L777, 44L977, 44M777, 44M977, 44N777, 44P777, 44P977, 44Q777, 44Q977 and etc.
  • Fast and Direct shipping from US warehouse.
Rank No. #19
Cylinder Head Gasket Compatible with Ref# 12589226 Chevrolet/Buick/Pontiac
  • ·★The company follows the management tenet of "survival by quality, cooperation by quality, development by quality", casts the satisfactory product for the customer.
  • ·★Compatible with Chevrolet/Buick/Pontiac Accord 4.8L/5.3L/5.7L in. V8 Engine.
  • ·★All of the company`s products are cerified safety,can be safely used.
  • ·★This cylinder head gasket can bring the experience that exceeds OE quality to you, the need that satisfies you on the biggest level.
  • ·★Please check the details of this product carefully to determine whether this head gasket is suitable for your vehicle. If you have any questions, you can also send us an email.
Rank No. #20
Evergreen FSHB8-30101 Full Gasket Set Head Bolt
  • Our seals and gaskets are designed to meet or exceed all Original Equipment (OE) specifications for proper sealing
  • Advanced manufacturing technology ensures durability and optimum operation
  • Specialized designs yield significant and noticeable improvements to your car engine
  • Engineered and manufactured specifically for aftermarket repairs or "do it yourself" projects
  • Application-specific design ensures correct fitment

Last update on 2022-01-01 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Head Gasket Ford 60 Diesel for our consumer to review. The reports above show ratings of the best overal, best cheap Head Gasket Ford 60 Diesel to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.