The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Harley Davidson Turn Signal Flasher Relay of 2020 – Consumer Guide & Reviews

Rank No. #1
OZ-USA Equalizer Harley Led Load Blinker Turn Signal Lights Resistor Flasher Relay Fix
  • Best quality in the market. Must have for Harleys with after market LED turn signals.
  • Solves all led turn signal problems: No flashing, fast flashing, burned out bulb indicator.
  • Plug and play, no cutting and splicing required.
  • Some Harley's are wired differently. Minor wiring adjustment is required.
  • Warning: Extremely Hot when in use. Do not mount on plastic. Make sure it's not touching any wires.
SaleRank No. #2
Eagle Equalizer Plug and Play Load Equalizer and Stabilizer for Harley Davidson Motorcycle LED Turn Signals
  • ELIMINATE HYPER FLASH – Our Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2013 Harleys. It does not produce heat or put a load on the electrical system under use. Only one unit is needed for either 2 or all 4 turn signals.
  • EASY TO INSTALL – Install this equalizer with ease! It comes with easy-to-read instructions and a user-friendly design. The Eagle Equalizer has Harley OEM connectors that plug directly into the wiring harness underneath the seat in minutes.
  • PLUG AND PLAY - Installation typically takes about 5 minutes. Under the seat is the turn signal wire harness. Simply plug the Eagle Equalizer into the harness.
  • COMPATIBLE – You can use this equalizer with a combination of LED and incandescent turn signals. Works with all makes and models of LED turn signals. The Eagle Equalizer is a direct plug and play fit on ‘96 - ‘10 Softails, ‘97 - ‘11 Dynas (Except 2009-2011 FXDB, 2010-2011 FXDWG), ‘99 - ‘03 Sportsters, ‘06 - ‘09 Street Glide, ‘97 - ‘09 Road Glide Standard, ‘97 - ‘13 Touring Models (Except ‘10-’13 Street Glide, ‘10 - ‘13 Road Glide Custom), and ‘10 - ‘13 Tri-Glide. Does not fit CVO models.
  • EAGLE LIGHTS LIFETIME WARRANTY - Our products are designed to outlast your bike! But should something go wrong, you are covered by a lifetime manufacturer's warranty. The best warranty in the business! No hassle returns and no hassle warranty replacement. DOT approved, high lumen output, easy installation all backed by a lifetime warranty. Eagle Lights, the original, the best and the brightest. What are you waiting for?
Rank No. #3
Custom Dynamics ProBEAM BCM Compliant Turn Signal Conversion Kit (1157 Rear, 1157 Front) For Harley Davidson
  • Kit Includes: Front 1157 ProBEAM Amber/White Dynamic Ringz Rear 1157 ProBEAM Red LED Turn Signals (models without center taillight) Smoked front turn signal lenses Red rear turn signal lenses
  • ProBEAM Turn Signals are DOT and SAE Compliant and are backed by the Custom Dynamics Lifetime LED Warranty. Fitment includes US Harley-Davidson models equipped with Bullet Style dual intensity 1157 rear turn signals. Signal Stabilizer or Load Equalizer NOT required on these BCM models. Patent Pending
  • . Plug & play front and rear turn signal conversion kit for 2011-2018 Harley-Davidson Softail Blackline, Slim, Slim S, and Breakout. 2012-2018 Street Bob, 2018 Fat Bob, 2018 Fat Boy, 2012-2017 Dyna Wide Glide, Low Rider S, 2014-2018 Sportster Forty-Eight, Iron 883, Seventy-Two, and Roadster. 2014-2018 Street Glide, Street Glide Special, Road Glide, Road Glide Special, and Road King Special. 2011-2012 Softail Convertible CVO, 2014-2015 Softail Deluxe CVOand 2014 Breakout CVO.
Rank No. #4
LivTee 2-Pin Electronic LED Flasher Relay Fix Motorcycle Turn Signal Bulbs Hyper Flash
  • 2-Pin Part# LF1-S-PIN Electronic LED flasher relay fix for LED bulbs that fixes hyper flash problems, Operates at 12V
  • Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well
  • Completely waterproof design, Directly replace the OEM two-wire flasher. Allow LED bulbs to blink at the normal rate.
  • Effectively prevent the original car halogen light bulb changing LED turn the light to appear flashing too fast or not flash.
  • Package quantity: 1PCS, if you have any question or are not 100% satisfied please feel free Contact us.
Rank No. #5
iJDMTOY (1) 2-Pin Electronic LED Flasher Relay Fix For Motorcycle Bike Scooter LED Turn Signal Bulbs Hyper Flash Issue
  • Part Number: LF1-S-PIN (Size: 1" x 1" x 1")
  • Completely waterproof design and direct replace most OEM two-wire/pin flasher
  • Eliminate the need for tapping wires to install the load resistors and allow LED bulbs to blink at the normal rate
  • Work for most Motorcycles such as Honda, Kawasaki, Suzuki, Yamaha and many other brands as well
  • This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Rank No. #6
XtremeAmazing 2 Pack 12V 2 Pin Motorcycle Indicator Light LED Electronic Fixed Turn Signal Flasher Relay
  • It can solve problems like rapid flashing, not flashing,hyper flashing, or bulb burnt out warning on dashboard.
  • Fit most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well
  • Speed adjustable, you can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m
  • Package Contents: 2 x 2 Pin Turn Signal Flasher
Rank No. #7
iJDMTOY 2-Inch White Halo/Amber Inner 1157 Front & Red Full LED Rear Turn Signal Light Bulbs Compatible With Harley Davidson Touring Electra Glide Road King Sportster Motorcycles
  • Compatible with most 1986-2018 Harley Davidson models with 2 screw bullet shape flat turn signal lamps such as Heritage Softail, Road King, Electra Glide, Sportster, etc.
  • The complete set comes with a pair of white/amber 48-LED 1157 LED front turn signal bulbs and a pair of red 48-LED 1157 rear turn signal bulbs
  • The front white/amber LED bulbs function as parking/driving/daytime running DRL lights in xenon white and amber yellow for turn signals, the rear red double filament LED bulbs with bright/dim modes function as tail running lights and rear blinker lights
  • Direct plug and play for most early models; Compatible with 2013 and up models, you will need to add load resistors (ASIN: B00FDX6YAE) to prevent the LED bulbs from hyper flashing
  • This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
SaleRank No. #8
Motorcycle Turn Signals Light, XINDELL 2 Pcs Aftermarket Incandescent Blinkers 3 Wire Chrome Bulb Indicators Bobber Turn Signals for Harley Honda Yamaha Suzuki Kawasaki Cruiser Mini Chopper Frame
  • ✔Nice Exterior: Black with Amber Lens, high Quality Aluminum, enhance the look of your Motorcycle with these Custom Turn Signals.
  • ✔Apply to: Universal suitable for motorcycles, motorbikes, most Honda, Yamaha, Suzuki, Kawasaki, Harley, Ducati, KTM, BMW, Triumph, Hyosung and other motorcycles with 10 mm Holes Fairing. Fit for all universal 12V motorcycles / motorbikes Tail light, Brake light, Front and back Turn signal light.
  • ✔Easy to Install and Remove: 3 wires are configured, installed in a variety of motorcycles easily, which can be directly connected to the motorcycle ACC circuit, (AAC circuit means Adaptive Cruise Control .Which is the position where the key is controlled).Use the nut to secure the product in places you want to install.
  • ✔Water Tight and Anti-corrosion: iP65 Grade (Prevent the infiltration of low pressure water column from any direction),It can be used in rain or in harsh environments.High strength PP has been used for the light body, with features of shockproofand corrosion resistance.
  • ❤XINDELL Motorcycle Turn Signals: If the Motorcycle Light make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers. Plesae don't hesitate to contact us by email.
SaleRank No. #9
iBrightstar 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
  • 2Pcs 50W 6ohm Load Resistors + 4pcs Quick wire Clip.
  • Prevent LED Turn Signal Lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard.
  • NOTICE! Load Resistors heat up like light bulbs and get super HOT when working. Make sure you mount them away from any wires or plastic.
  • One resistor is required for each turn signal bulb or each license plate light bulb.
  • Easy installation. Just connect the wires with the splice taps provided and no wire cutting is necessary.
Rank No. #10
4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code (Resistors get very hot during working)
  • Solution for fast turn signal blinking response after installing LED light bulbs.
  • Not designed for consistant working bulbs( Day time running light, fog light, headlight LED bulbs). Resistors may become very hot to melt plastic parts nearby.
  • Warning: Load Resistors heat up like halogen bulbs. They get really HOT when working. Mount them on metal surface by screws(not included). Keep resistors inchs away from plastic parts.
  • You may connect the wires with the splice taps provided(quick but maybe not solid). Or you may cut the wires and connect them more solidly.
  • Usually each LED bulb installation requires one resistor connected in parellel (see picture below for instruction)
Rank No. #11
iBrightstar Newest 9-30V Super Bright Low Power 1156 1141 1003 BA15S LED Bulbs with Projector replacement for Turn Signal Lights,Amber Yellow
  • (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v,Size: 1.55"x 0.61" x 0.61"
  • Fits:1156 1003 BA15S P21W 1156A 1156NA 87 93 97 97A 97NA 199 631 1073 1095 1141 1195 1295 2396 3497 5007 5008 7506 12088 1295NA etc.Easy installation, plug and play.
  • Application: Turn Signal Lights,Brake Lights,Tail Lights,Side Marker Lights,Corner Lights,Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
  • Advantage:Non-polarity design, 300% brighter than original halogen bulb,full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature,built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #12
iBrightstar Newest 9-30V Super Bright Low Power 1157 2057 2357 7528 BAY15D LED Bulbs with Projector replacement for Turn Signal Lights and Brake Lights, Amber Yellow
  • (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v,Size: 1.56"x 0.66" x 0.66"
  • Fits:1157 BAY15D 1157 1157NA 1157A 1178A 1196 2057 2057A 2357 2357A 2357NA 2397 7528 etc.Easy installation, plug and play.
  • Application: Turn Signal Lights,Brake Lights,Tail Lights,Side Marker Lights,Corner Lights,Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
  • Advantage:Exclusive design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
SaleRank No. #13
iBrightstar Newest 9-30V Super Bright Low Power 3156 3157 3057 4157 LED Bulbs with Projector Lenses Replacement for Front/Rear Turn Signal Blinker Lights or Brake Tail Parking Lights, Amber Yellow
  • (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high brightness chips per bulb,Working Voltage:9v-30v (fit 12V, 24V vehicles),Size: 1.82"x 0.88" x 0.67"
  • Fits:3056 3057 3057K 3057LL 3155 3157 3157A 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4157 4157LL 4157K 4157NA 4157NAK etc.Easy installation, plug and play.
  • Application: Turn Signal Lights,Brake Lights,Tail Lights,Side Marker Lights,Corner Lights,Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
  • Advantage: Non-polarity design,Compatible for both CK/SRCK and Standard socket. More than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #14
iBrightstar 9-30V Flashing Strobe Blinking Controller Flasher Module for LED Brake Light Tail Stop Light High Mount/3rd Brake Lights - 2Pack
  • This small block controller can enhance your brake light function with 4 times fast-blinking and 4 times slow-blinking and then turn stable solid light. Improve traffic safety warning, to avoid rear-end accident.
  • Working Voltage: 9-30V, will suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED Lighting Accessories Bulbs.
  • Complete sealed technology make it waterproof, short circuit prection.
  • Easy to install. Black wire -- Negative Pole; Red wire -- Positive Pole.High quality and strictly controlled system for durable and highly performed use.
  • Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #15
iBrightstar Newest 9-30V Flashing Strobe Blinking Brake Lights 3157 3057 3156 3056 LED Bulbs replacement for Tail Brake Stop Lights, Brilliant Red
  • (Set of 2 Bulbs)66SMD 3014 high Brightness chips per bulb,Working Voltage:9v-30v
  • Fits:3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc.Easy installation, plug and play.
  • Application:Flashing Strobe Blinking brake LED light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
  • Advantage:Non-polarity design, 300% brighter than original halogen bulb,full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature,built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #16
HTTMT Chrome 41mm Turn Signal Clamps Headlight Mount Bracket Fork Ear Chopper Cafe Racer Black For Universal Honda CBR Kawasaki Suzuki Yamaha Harley Davidson
  • High Quality Motorcycle Turn Signal Indicator Relocation Fork Clamp Kit
  • Clamps Fits 41mm Fork Tubes
  • Complete Kit Used to Relocate the Front Turn Signals.
  • Professional installation is recommended
  • Specifics,,Quantity: 1 Pair (Left and Right Clamp),Instructions: Not Included,Condition: 100% Brand New,Material: High Quality Billet Aluminum,Color: the same like pictures show ,,,,
SaleRank No. #17
5 PACK 40/30 AMP 12 V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Bosch Style Automotive Relay
  • 12 AWG tinned copper wires for Pin 30, Pin 87, Pin 87a. Length: 5.1 in
  • 16 AWG tinned copper wires for Pin 85, Pin 86. Length: 5.1 in
  • 12 V DC waterproof relay (max 14 V). 40 A / 30 A High switching capability
  • Excellent waterproof performance, high quality in any weather conditions
  • Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
SaleRank No. #18
Stop-Alert WigWagger 240 HEADLIGHT Wig Wag Alternating Flasher Electronic Relay LED Xenon Halogen HID Incandescent - Emergency Police Ambulance Trucks 10 AMP 240W 12-24V 150 FPM
  • «ALERT- EMERGENCY- WARNING» 150 Flash Per minute Increase the visibility of your vehicle, Alarms everyone arounds you.
  • «SOLID TOUGH CIRCUITS» Heavy Duty 72W Load (36w per channel) Daytime Running compatible, 12v - 24v
  • «STANDOUT ON THE ROAD» With the Fast Flashing Alternating Light "Wig Wag" Flash Patterns.
  • «SECURITY IS OUR PRIORITY» Waterproof design to avoid short circuit, LED & Incandescent lamps fit.
  • «EASY TO INSTALL» Comes w/ Instruction kit + 3M adhesive tape **PROFESSIONAL INSTALLATION REQUIRED**
Rank No. #19
Brake Strobe Flasher module plug and play for Harley motorcycles rear alert safety Stop Tail light led halogen
  • Each time the brakes are applied, your brake light will rapidly flash 3 times, slow flash 3 times, and then solid until you release the brake.
  • Increase your visibility and safety. This module alerts the vehicle behind you. Can prevent rear-end collisions.
  • Will work with both oem halogen tail lights and aftermarket LED lights
  • Compact design easy to install, plugs right under your seat. Will not affect tourpac lights (if equipped).
  • Plug and play for Harley models listed: ’97-’12 Electra Glides, ’98-’12 Road Glides (except ’09 FLTRSE, '10-'12 FLTRX, '12 FLTRXSE), ’06-’09 Street Glides, ’97-’12 Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’11 Dynas (except ’09-’11 FXDB, ’10-'11 FXDWG) ’99-’03 Sportster 883 / 1200 XL Models Compatible with HD factory alarm.
Rank No. #20
Alla Lighting Super Bright LED 3157 Bulb High Power 4014-SMD 4157 3457 3156 3057 3157 LED Bulb 3457A 4157NA 3157A Amber Yellow LED Turn Signal Blinker Light Bulbs Lamp (Set of 2)
  • (Set of 2) High illumination T25 wedge 3156 3157 dual filament LED turn signal light bulbs; LED Type: 54 pieces high power & high quality 4014 led chips per 3157 LED bulb.
  • Color: Amber Yellow; built in IC driver, Working Voltage: 12V ~ 24V. Working Power: 7.8W; Built in intelligent IC driver.
  • Cross reference number: 3056, 3456, 3156. 3156AK, 3047, 3057, 3057A, 3155, 3157, 3157A, 3157NA, 3357, 3357A, 3454NA, 3457, 3457A, 3457NA, 3757A, 4057, 4114, 4157, 4157NA, 5702A, 5702AK .
  • Application: Turn signal lights,back up reverse light,blinker light,corner light,side marker lights,etc;for turn signal lights, it may require 50W 6ohm load resistor to avoid hyper flash or malfunction.
  • IMPORTANT Notice : compatible with both CK SRCK sockets and standard socket. ONE year warranty at manufacturer defect.

Last update on 2020-06-26 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Harley Davidson Turn Signal Flasher Relay for our consumer to review. The reports above show ratings of the best overal, best cheap Harley Davidson Turn Signal Flasher Relay to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.