The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Hardie Plank Siding Installation Tools of 2020 – Consumer Guide & Reviews

Rank No. #1
Bullet Tools 26 in. EZ Shear Siding Cutter with blade for hardie plank, vinyl siding, fiber-cement siding, and trim
  • Cut Where You Work - Save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades
  • Quiet Operation / No Electricity - Cut anytime day or night
  • DUST FREE cutting provides a healthier job site
  • Made in the USA
SaleRank No. #2
PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set) , Green
  • ONE-PERSON INSTALLATION – working as a pair, the gecko gauge fiber cement siding tool supports fiber cement-board siding for one-person installation with virtually no layout time
  • USE WITH FIBER-CEMENT SIDING – use the SA903 gecko gauge siding tool with 5/16” fiber-cement siding, including James Hardie’s updated HZ5 series with new “eased” drip-edge profile
  • ADJUSTABLE – gauge is adjustable at 1/4” increments for 4”-8” siding reveals
  • PATENTED FRICTION-CAM MECHANISM - supports full 12’ fiber cement-board siding lengths
  • WON’T SCRATCH OR MAR – heavy gauge plastic won’t scratch or mar pre-painted siding
Rank No. #3
PacTool International SA90338 Gecko Gauge, LP Siding Installation Tool (1 Set)
  • ONE-PERSON INSTALLATION - gauges and supports LP thick composite siding products for one-person installation with virtually no layout time
  • USE WITH LP SIDING PRODUCTS - use the SA90338 gecko gauge siding tool with 3/8” LP composite siding products
  • ADJUSTABLE – gauge is adjustable at 1/4” increments for 4”-8” siding reveals
  • PATENTED FRICTION-CAM MECHANISM - supports full 16’ LP siding lengths
  • WON’T SCRATCH OR MAR – gecko gauge won’t scratch or mar pre-painted siding
Rank No. #4
EZi-Gauge - siding Nailer Offset attachement (FC)
  • Fits: (OD 0.697″ to 0.706) Hitachi NV65AH, Max CN565S, Makita AN611, Bostich N66C-1, DeWalt DW66C-1, and Duo-Fast DF225C
Rank No. #5
Malco FCG2 Fiber Cement Siding Overlap Gauge Set (Pack of 2)
  • Allows 1-person installation of siding planks
  • Two gauges support the entire length of plank and precisely gauge a standard 1-1/4-Inch overlap - even on a bowed wall
  • No adjustments to vary and nothing to mark
  • Works on old or new 5/16-Inch fiber cement siding plank
  • Will not mar finish of pre-painted siding
Rank No. #6
Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings
  • 13" cutting capacity
  • Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank , Cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
  • Compact and easy to use; produces clean, precision cuts with no splintering and smooth finish
  • Sturdy high-quality steel and aluminum construction
  • Extended handle for increased leverage
SaleRank No. #7
PacTool SS204 Snapper Shear For Cutting Up To 5/16” Fiber Cement Siding, 4.8 Amp Motor
  • CUTS FIBER CEMENT- Designed to cut fiber cement siding up to 5/16” thick
  • LESS DUST, LESS MESS- Keep the job OSHA compliant, this unique shear design cuts fiber cement quickly while producing less dust making for easy clean-up
  • SOLID STEEL BLADES- Reversible blades are machined from solid tool steel and are durable enough for 20, 000 feet of cutting
  • 4.8-AMP MOTOR- 3/8” drive motor is ideal for smaller jobs or DIY projects
  • CAN BE USED ON PRE-PAINTED SIDING- cut with painted side face down for perfect, finished edges
SaleRank No. #8
Norske Tools NMAP004 13 inch Laminate Flooring & Siding Cutter with Sliding Extension Table with Bonus Floor Installation Kit Great Value
  • 13" Cutting capacity
  • Sliding extension table supports longer boards (41" Working length)
  • Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank, cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
  • 28-1/2" Handle for increased leverage
  • Bonus accessory Kit includes pull bar, tapping block, 16 PVC inserts and mallet ($30 value)
Rank No. #9
Malco FCFG 5-Inch to 8-Inch Exposure Fiber Cement Siding Facing Gauge
  • More accurate and easier to use than home made wooden blocks
  • Adjustable for use on 5, 6, 7, and 8 inch exposures
  • Easily held with one hand while steadying new plank for nailing
  • Made from durable weather resistant nylon.
  • Can be used with FCG2 overlap gauge for one person installations
SaleRank No. #10
Bullet Tools 220 20 in. EZ Shear Siding Cutter with blade for hardie plank, vinyl siding, fiber-cement siding, and trim
  • Cut Where You Work - Save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades. Built in ruler and moveable fence for 45° (Up to 14 in. or 355.6 mm wide) and 90° cuts
  • Quiet Operation / No Electricity - Cut anytime day or night
  • DUST FREE cutting provides a healthier job site
  • Made in the USA
SaleRank No. #11
Bullet Tools - ES00-2009 9 inch EZ Shear Sharpshooter 2.0 Laminate Flooring & Siding Cutter, 1 Year Warranty
  • Cut materials up to 9 inches in width. Max rake/angle - 45 degrees on 6 inch board. Make cuts up to 9 inch. wide and 9/16 inch. thick
  • Dust free, quiet operation, no electricity - Cut where you work anytime day or night
  • One shear blade outlasts 10 or more saw blades
  • No assembly required - ready to use
Rank No. #12
EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter
  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank.
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank
  • Cuts up to 9” wide
  • Angle gauge allows for cuts up to 45 degrees
  • Quiet, dust free operation, No electricity required
Rank No. #13
Smart-Bit Pre-drilling and Countersinking Tool for Fiber Cement Board Including James Hardie Fiber Cement Board
  • Smart-Bit Tool for Fiber Cement Board
  • Tungsten Carbide Tipped Countersink & Drill Bit
  • The Smart-Bit stop collar spins free of the drill bit, preventing marring of the surface
  • Each Smart-Bit comes with 2 replacement drill bits
Rank No. #14
EAB Tool 2100007 13" Laminate Floor Cutter with Installation Kit
  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank.
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardy plank
  • Cuts up to 13” wide
  • Angle gauge allows for cuts up to 45 degrees
  • Quiet, dust free operation, No electricity required
SaleRank No. #15
Bullet Tools - 213 13 in. EZ Shear Siding Cutter with blade for hardie plank, vinyl siding, fiber-cement siding, and trim
  • Cut Where You Work - Save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades
  • Quiet Operation / No Electricity - Cut anytime day or night
  • DUST FREE cutting provides a healthier job site
  • Made in the USA
Rank No. #16
Freud D1208DH Diablo 12-Inch by 8 Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade, Multi
  • Freud's limited lifetime
  • 12X8 PCD FIBER CEMENT BLADE
  • The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Parma-Shield coating to reduce heat
Rank No. #17
EZi-Gauge - Engineered Wood siding Nailer Offset attachement (EW)
  • Fits: Hitachi NV65AH, Max CN565S, Makita AN611, Bostich N66C-1, DeWalt DW66C-1, and Duo-Fast DF225C (OD 0.697″ to 0.706)
  • Usable with several engineered wood lap sidings
Rank No. #18
Malco FCMS 5 in. to 8 in. Exposure Facing Gauge and Overlap Gauge Set
  • Allows for easy and accurate 1-person siding installations
  • The gauge acts like an extra pair of hands to prop up one end of the plank
  • Set includes 1 facing gauge and 1 overlap gauge
  • Durable nylon facing gauge adjusts to 5, 6, 7, and 8-inch exposures without tools
  • No adjustments to vary and nothing to mark
Rank No. #19
Bullet Tools 20 inch MAGNUM Laminate Flooring Cutter for pergo, wood and more
  • Cut Where You Work - Save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades
  • Quiet Operation / No Electricity - Cut anytime day or night
  • DUST FREE cutting provides a healthier job site
  • Made in the USA.45° Angle Cut: On 14 (35cm) inch wide product
Rank No. #20
Malco TSF1 Turboshear Fiber Cement Siding Shear
  • Attaches to a drill or impact driver you already own
  • Easily cuts 5/16-inch Fiber Cement Siding Plank with minimal dust
  • 360 degree rotating head for optimum tool clearance and material flow
  • Able to cut precise arcs, straight lines and fine trimming
  • Made in the USA

Last update on 2021-07-06 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Hardie Plank Siding Installation Tools for our consumer to review. The reports above show ratings of the best overal, best cheap Hardie Plank Siding Installation Tools to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.