The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Harbor Freight 1500 Lb Motorcycle Lift of 2020 – Consumer Guide & Reviews

Rank No. #1
Black Widow BW-0101 Foot-Operated Motorcycle or ATV Lift Jack Stand
  • Lift custom motorcycles, ATVs, and other powersports vehicles weighing up to 1,500 lbs. for service and maintenance
  • Hydraulic foot pedal operation with a removable 27" jack handle
  • (2) 12" x 2.5" protective rubber saddle surface pads, commercial grade caster wheels
  • Integrated tie-down points to secure motorcycles and ATV's with 3 position lift lock mechanism
  • Heavy duty steel construction with a black paint finish
Rank No. #2
OTC 1545 Ultra Low Profile Motorcycle and ATV Lift with 1,500 lb. Capacity
  • OTC's Motorcycle/ATV Lift has a 1,500 pound capacity and 17 inch long skids that will lift the largest and widest cruisers on the road
  • Lowest clearance available - 3-1/2 inch at lowest level - with a wide lifting range of 3-1/2 inches to 16-3/4 inches
  • Removable handle provides 360 degree access to load; T-handle design makes maneuvering the jack easier
  • Great features include: foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety when the jack is in use
  • Two-year limited warranty
Rank No. #3
XtremepowerUS 2200Watt Heavy Duty Electric Demolition Jack hammer Concrete Breaker W/Case, Gloves
  • It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
  • Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
  • Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
  • It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition
  • Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches
Rank No. #4
ZENY 1100 LB Wide Deck Motorcycle Center Scissor Lift Jack Repair Hoist Stand Bikes ATVs,Motorcycle Dirt Bike Scooter Crank Stand
  • 1,100 lbs scissor lift jack for motorcycle bike with flat bottom,Simple crank operation
  • Widen deck (wide 9'') with safe rubber surface to prevent slippage and scratching
  • Solid & Sturdy steel construction with a red paint finish
  • This motocycle lift repair stand is Designed to fit most motorcycle models,For use in the garage, shop, or at the track
  • Platform Dimensions: 14.5" x 9",Weight Capacity: 1100 lbs.
Rank No. #5
Goplus Hydraulic Scissor Lift Table Cart Dolly Scissor Jack Hoist Stand 500LB Capacity W/Foot Pump
  • 【Durable Construction】Features with high-quality steel, this lift table could hold up to 500lbs and will not be out of shape or collapse.
  • 【Fully Adjustable Position】This lift table can position and raise work pieces up to 27 1/2 inches, down to 8 1/8 inches. You could adjust the position to meet your different needs.
  • 【Foot-operated Pedal and Hand Lever Design】This hydraulic pedal design would keep your hands free and save energy. The hand lever is for easy, controlled hydraulic release. It is easier to control the cargo and table.
  • 【Oil-resistant Nonslip Rubber Mat】In order to increase friction, this lift table features with rubber mat so the cargo is not easy to fall down or slip from it. Then more cargo could be placed on the lift table.
  • 【Two Locking Swivel Casters】More mobility and maneuverability could be achieved for the caster design. And the lift table could be fixed at some places easily.
Rank No. #6
Apextreme 1100 LB Motorcycle Lift Center Scissor Lift Jack Wide Flat Hoist Stand Bikes ATVs Garage Repair Stand
  • [SOLID CONSTRUCTING & RUST PREVENTION] - Solid steel construction in red powder coated finish which is for oil-resistant, grease-resistant and dirt-resistant. Galvanized treatment accessories to prevent rust.
  • [NON-SLIP DESIGN] - Wide top surface desk design with a durable rubber pad which has striped veins to prevent slippage and scratching.
  • [WIDE APPLICATION] - The lift fits most motorcycle models including cruiser bikes, street bikes, adventure touring motorcycles, etc.
  • [OPERATE SIMPLY] - Come with a free Galvanized Crank Handle which is very easy to operate. Just rotating the metal sleeve to lift your motorcycle easily, a really excellent helper for motorcycle repair.
  • [DIMENSIONS & LOAD-BEARING] - Lift range: 3-3/4 in. to 14-4/5 in. Platform dimensions: 14.6'' x 9''. Weight Capacity: 1100 lbs.
Rank No. #7
Caliber 13527 Ramp PRO 2.0 Universal ATV and Snowmobile Ramp - 1,500 lb. Capacity
  • The industry’s most innovative ramp designed for ATVs, UTVs, snowmobiles, and golf carts!
  • New 11. 5" Low Pro Grip Glide provides increased versatility to the most versatile ramp on the power sports market and accommodates snowmobile ski stances down to 30"
  • Low Pro Grip Glides provide the market’s safest walk when entering and exiting the vehicle or trailer
  • RampPro 2. 0. measures at 7. 5’ (90) long for a safe, effective, and comfortable loading angle
  • 1, 500 lbs. Capacity - Includes Caliber's Retrax strap and Caliber's lifetime
Rank No. #8
Orion Motor Tech Dilated Scissor Lift Jack for Street Bike, Cruiser, Adventure Touring Motorcycle
  • REINFORCED LIFT CAPACITY:With a hefty lift capacity of 1200 lb and dynamic lift height range from 3 3/4" to 13 2/5", it can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
  • DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
  • XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
  • NON-SLIP DECK & GLOVES: The lift deck is padded with premium rubber for extra durability and stability. Protective gloves are included for your safety. Manufactured and tested to meet all current safety standards.
  • NOTE: Avoid using an impact wrench - improper use may cause damage to the nut. Lift your motorcycle easily by rotating the metal sleeve, please refer to the instructions.
Rank No. #9
Goplus Motorcycle ATV Hydraulic Scissor Lift Jack Stand Quad Dirt Street Bike Hoist 1500 Lbs
  • 【Solid and Durable Design】1,500 pounds of lift capacity, solid high-grade steel construction with black and red powder coated finish which protects the stand from rust and corrosion.
  • 【Motorcycle Easy Lift】Allows easy and controlled lifting of your off-road motorcycle, perfect for repair, maintenance, and storage.
  • 【Adjustable Height】Fully adjustable deck height, lifting small vehicles up to 17 3/8" high allows it perfect fit for most bikes and safety lock with multiple locking positions for safety ensurance.
  • 【 Recommended Use 】Swivel casters for easy to move, position and transport, it's designed to ideal lift for motorcycles, ATVs, tractors, personal watercraft and snowmobiles.
  • 【100% Risk-free Satisfaction Guarantee 】We are quite sure that you will be super-impressed with the DURABILITY, PORTABILITY and HIGH QUALITY of our motorcycle lift stand.
Rank No. #10
Partsam 2200 lbs Lift Electric Hoist Crane Remote Control Power System, Zinc-Plated Steel Wire Overhead Crane Garage Ceiling Pulley Winch w/Premium Straps (w/Emergency Stop Switch)
  • Tips : How To USE: As image 4 shows, it firstly needs a mental bar or solid wooden bar that affords enough weights to hang the hoist up ceiling indoor or hanging outdoor.
  • Lifting Weight: 1100lb.(Single-line), 2200lb.(Double-line) ; Lifting Height: 38ft(Single-line), 19ft(Double-line) ; Lifting Speed: 33ft/min(Single-line), 16ft/min(Double-line);
  • Electric chord of remote 5.2 FT ; Handle remote cord is 4.9FT ; Diameter of wire rope: 0.22inch ; Tensile strength of wire rope ≧ 1770N/mm2
  • Rated Volt: 110/120V ~ 60Hz ; Rated Current: 12.5A ; Input Power: 1450W ; Horsepower: 1.944 hp
  • VERSATILE USE: Partsam electric hoist winch can be used to lift regular or irregular shape things as stones, trees, mower, engine, truck top cover ect. vertically or horizontally in garage, ceilings, loft, barn, attic anywhere and anytime you can imagine, and is a "must" in Christmas for lifting all kinds of heavy things. Extra Lift Slings we offer are included to help to make your job easier.【PARTSam Electric Hoist Runs with Emergency Stop Switch, the Red Button Works for that】
SaleRank No. #11
Extreme Max 5001.5044 1000 lbs. Motorcycle Scissors Jack - Wide
  • Extends up to a 14" height
  • Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
  • Durable rubber padding on platform
  • Heavy-duty steel frame
  • 1100 lb. weight capacity; will not lift trikes
SaleRank No. #12
MaxxHaul 70271 Adjustable Motorcycle Wheel Chock Stand Heavy Duty 1800lb Weight Capacity
  • Capacity: 1,800 pounds
  • Accommodates most wheels 3 to 5 inches wide
  • Heavy duty steel construction; Black powder coat finish to resist rust and corrosion
  • Self-locking wheel cradle utilizes bike weight to keep itself upright
  • Anchor points for added stability
Rank No. #13
TR Industrial Portable 4-Ton Dual Gear Power Puller
  • This portable power puller gives you 4 tons (8,000 lbs) of maximum pulling power and weights less than 10 lbs. It is up to 30% lighter than comparable pullers without skimping on the power. A sturdy carry storage case is included. Easily store the power puller in your truck, trailer, workshop or garage. Ideal for off road vehicle recovery, loading heavy loads unto trailers, pulling fences, logs, rocks, and stumps
  • Built to last all steel frame and gears. Premium steel construction keeps the power puller resistant to wear and tear. High quality galvanized finish gives it excellent protection against weather and elements
  • Dual gear and dual locking pawl system distributes force evenly so you can enjoy easy and consistent pull. We use 1/4 in. aircraft-grade braided steel cable. Our 3/8 in. hooks are drop forged with safety latch and fits up to 1/2 in. chains
  • 18 in. high-leverage handle. We also designed a comfort grip that covers more than half of the handle (10.5 in.). You have more space to comfortably apply force and pull the load more easily
  • Hook to hook distance is 4 ft. 8 in. fully extended and 1 ft. 11 in. fully contracted. The maximum capacity is 4 tons (8,000 lbs) and a safe working load is 2 tons (4,000 lbs)
Rank No. #14
Partsam 1100 lbs Lift Electric Hoist Crane Remote Control Power System, Zinc-Plated Steel Wire Overhead Crane Garage Ceiling Pulley Winch w/Premium Straps (w/Emergency Stop Switch)
  • Tips : How To USE: As image 4 shows, it firstly needs a mental bar or solid wooden bar that affords enough weights to hang the hoist up ceiling indoor or hanging outdoor.
  • Lifting Weight: 550lb.(Single-line), 1100lb.(Double-line) ; Lifting Height: 38ft(Single-line), 19ft(Double-line) ; Lifting Speed: 33ft/min(Single-line), 16ft/min(Double-line);
  • Electric chord of remote 5.2 FT ; Handle remote cord is 4.9FT ; Diameter of wire rope: 0.17inch ; Tensile strength of wire rope ≧ 1770N/mm2
  • Rated Volt: 110/120V ~ 60Hz ; Rated Current: 8.5A ; Input Power: 1000W ; Horsepower: 1.341 hp
  • VERSATILE USE: Partsam electric hoist winch can be used to lift regular or irregular shape things as stones, trees, mower, engine, truck top cover ect. vertically or horizontally in garage, ceilings, loft, barn, attic anywhere and anytime you can imagine, and is a "must" in Christmas for lifting all kinds of heavy things. Extra Lift Slings we offer are included to help to make your job easier.【PARTSam Electric Hoist Runs with Emergency Stop Switch, the Red Button Works for that】
SaleRank No. #15
Black Boar ATV/UTV, Manually Lift and Lower Implements with Handle or Actuate Using a Drill and Socket (66013)
  • Allows for quick implement change; compatible with all Black Boar Implements
  • Manually lift and lower implements, or remove the handle and operate the lift with a drill and socket
  • The parallel linkage design maintains correct implement angle as it is lowered
  • Optimized design is easy to install by one person and minimizes adverse effects to maneuver
  • Made of durable steel with a streamlined, minimalist design
Rank No. #16
VIVOHOME Steel Motorcycle ATV Wide Deck Scissor Lift Jack Crank Hoist Stand 1100 lbs
  • NICE APPEARANCE & HIGH QUALITY - Heavy duty and solid steel construction in a red and black powder coated finish. The paint is for easy cleanup, oil-resistant, grease-resiatant and dust-resistant
  • ANTI-SLIP DESIGN - Top surface is designed a durable rubber pad with striped veins, which is benificial to prevent slippage and scratching
  • MULTIPURPOSE - The jack fits most motorcycle models including cruisers, trikes, Can Am Spyders, ATVs, UTVs, dirt bikes, snowmobiles, etc
  • EASY TO OPERATE - Attached with a free crank for easy operation. Just rotating the metal sleeve to lift a motorcycle easily, a really excellent helper for motocycle repair
  • DURABLE & HEAVY DUTY - Maximum lift height: 14.5 Inch. Total weight capacity: 1100 lbs. For use in the garage, shop, or at the track
Rank No. #17
Pro-LifT T-2152 Grey Hydraulic Motorcycle Jack - 1500 lb. Capacity
  • 1,500 pounds weight capacity
  • 3 position safety lock
  • Low profile clearance of 4-1/2 inches
  • Anti-slide stops
  • Speed sensitive foot pedal release
Rank No. #18
Apextreme 1100 LB Motorcycle Lift Center Scissor Lift Jack Wide Deck Hoist Stand with Saddle and Safety Pins Bikes ATVs Garage Repair Stand
  • 🎄【Heavy Duty Construction】The jack is made of solid alloy steel with decent powder coated finish, strong and sturdy enough to use for a long time, easy to clean up (oil, grease and dirt-resistant), the galvanized treatment accessories also ensures anti- rust.
  • 🎄【Optional Height & Safety Design】Attached with 2 screw adapters for variable height adjustment. Also the top durable rubber saddle also protect your beloved bikes from slippage and scratches. The 3" swing special design on each side of the base also adds stability and security.
  • 🎄【Easy Operation & Free Crank】 A removable galvanized crank handle is included for easy repair-operation, just rotate the metal sleeve to lift motorcycles effortlessly, save much labor for frequent repair and maintenance work.
  • 🎄【Multiple Function & Universal tool】The jack is ideal for doing tire, oil, filter changes and compatible with most motorcycle models including cruisers, street bike, dirt bikes, adventure touring, etc.
  • 🎄【Product specification】Lift range(With detachable saddle): 6.88'' to 20.65''. Platform dimensions: 17.7'' x 5.9''. Weight Capacity: 1100 lbs.
Rank No. #19
Partsam 1760 lbs Lift Electric Hoist Crane Remote Control Power System, Zinc-Plated Steel Wire Overhead Crane Garage Ceiling Pulley Winch w/Premium Straps (w/Emergency Stop Switch)
  • Tips : How To USE: As image 4 shows, it firstly needs a mental bar or solid wooden bar that affords enough weights to hang the hoist up ceiling indoor or hanging outdoor.
  • Lifting Weight: 880lb.(Single-line), 1760lb.(Double-line) ; Lifting Height: 38ft(Single-line), 19ft(Double-line) ; Lifting Speed: 33ft/min(Single-line), 16ft/min(Double-line);
  • Electric chord of remote 5.2 FT ; Handle remote cord is 4.9FT ; Diameter of wire rope: 0.2inch; Tensile strength of wire rope: more than 1770N/mm2
  • Rated Volt: 110/120V ~ 60Hz ; Rated Current: 11.4A ; Input Power: 1350W ; Horsepower: 1.810 hp
  • VERSATILE USE: Partsam electric hoist winch can be used to lift regular or irregular shape things as stones, trees, mower, engine, truck top cover ect. vertically or horizontally in garage, ceilings, loft, barn, attic anywhere and anytime you can imagine, and is a "must" in Christmas for lifting all kinds of heavy things. Extra Lift Slings we offer are included to help to make your job easier.【PARTSam Electric Hoist Runs with Emergency Stop Switch, the Red Button Works for that】
SaleRank No. #20
Sunex 1500-Pound Hydraulic Wheel Dolly
  • Oversized l-shaped foot pedal protect user from jamming toes on wheel
  • Sturdy ratcheting design is maintenance free unlike competitive Hydraulic units
  • Convenient carrying handle for transportation
  • Locking casters on outboard wheels secure vehicle and comply with asme-pald 2014 standards
  • Convenient carrying handle into Side for portability

Last update on 2020-11-19 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Harbor Freight 1500 Lb Motorcycle Lift for our consumer to review. The reports above show ratings of the best overal, best cheap Harbor Freight 1500 Lb Motorcycle Lift to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.