The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Gtx 980 Water Cooling Kit of 2020 – Consumer Guide & Reviews

Rank No. #1
NZXT Kraken G12 - GPU Mounting Kit for Kraken X Series AIO - Enhanced GPU Cooling - AMD and NVIDIA GPU Compatibility - Active Cooling for VRM, Black
  • Enhance your GPU cooling: With a 40 % increase in cooling capacity compared to stock cooling, you’ll maximize your gpu clock speeds for higher performance and better frame rates
  • Comprehensive compatibility: Supports both reference and nonreference design amd and nvidia gpus, for more than 30 liquid coolers, including aftermarket vrm heatsinks
  • Active cooling for vrm: Comes with a 92 millimeter fan, providing active cooling for the vrm and memory on the graphics card
  • Easy installation: Designed for a fast and easy installation, you can now lay the graphic card flat as you install the kraken g12
  • Supports: Kraken x42/x52/x62/72 liquid coolers
Rank No. #2
EVGA GeForce GTX TITAN X 12GB HYBRID GAMING, "All in One" No Hassle Water Cooling, Just Plug and Play Graphics Card 12G-P4-1999-KR
  • Virtual Reality Ready
  • Great for 4K (GeForce GTX 980 Ti & above)
  • DirectX12 Ready
  • Gamestream to NVIDIA SHIELD
  • EVGA "All in One Cooling" w/o the Hassle, Just Plug and Play!
Rank No. #3
Cooler Master MasterLiquid LC240E RGB Close-Loop AIO CPU Liquid Cooler, 240mm Radiator, Dual Chamber RGB Pump, Dual MF120R RGB Fans, RGB Lighting for AMD Ryzen/Intel LGA1200/1151
  • Liquid cooling system: The Cooler Master LC240E delivers efficient cooing with our dual pump 120 millimeter fans; It keeps your system running effectively, even in the high load times; Air flow: 66.7 CFM; Noise level: 31.5 decibels
  • Dual chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology
  • 120 millimeter fans: Silent cooling at an efficient rate
  • Sleeved tubing: Reinforced FEP tubing to keeps the tube kink free and the liquid flowing to your CPU
  • RGB controller: Allows you customize colors and light effects
SaleRank No. #4
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
  • Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
  • Mandrels: Includes Mandrels for 45/90/180/360 degree bends
  • Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
  • Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
  • Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
SaleRank No. #5
EVGA CLC 240mm All-In-One RGB LED CPU Liquid Cooler, 2x FX12 120mm PWM Fans, Intel, AMD, 5 YR Warranty, 400-HY-CL24-V1
  • Compatible with Intel LGA2066/2011/2011-v3/1200/1150/1151/1155/1156/1366 and AMD AM2/AM3/AM4/FM1/FM2/TR4 and upcoming variants
  • 240mm Dual Fan radiator
  • Rgb LED's, can be synced to other EVGA RGB components
  • Unique EVGA fan design for reducing noise without sacrificing performance
  • Includes the software suite for monitoring and managing EVGA AIO's, EVGA flow Control. Airflow: 74. 82 CFM (Max)
SaleRank No. #6
Thermaltake V-Tubler PETG Tube 16mm (5/8") OD 1000mm 4-pack
  • PETG tubing for computer water cooling modding
  • Includes 4 x 1000 millimeter length tubes
  • OD: 16 millimeter/ ID: 12 millimeter
  • 100% PETG Crystal Clear Tube
  • Thicker Wall Design; Working temperature ranges from -4℉ (-20℃) to 143.6℉ (62℃).
Rank No. #8
Thermaltake Floe Dual Ring RGB 240 TT Premium Edition PWM TR4 AM4 LGA1200 Ready AIO Liquid Cooling System 240mm High Efficiency Radiator CPU Cooler CL-W157-PL12SW-A
  • Supports Intel LGA 2066/2011 3/2011/1366/1156/1155/1151/1150
  • Supports AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
  • 12 Separately Controlled RGB LEDs for unrivaled Lighting Control
  • Patented Ring Plus RGB Software Enabled : Changes the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices
  • 240 mm High Efficiency Radiator with Push/Pull Mounting Support
SaleRank No. #9
A-Tech 16GB (2x8GB) RAM for Dell Latitude E6530, E6430, E6430s, 6430u, E6330, E6230, E5530, E5430 | DDR3/DDR3L 1600MHz SODIMM PC3L-12800 Laptop Memory Upgrade Kit
  • Capacity: 16GB (2x 8GB Modules) | Type: DDR3L SODIMM | Speed: DDR3L 1600 MHz ( PC3L-12800 / PC3L-12800S ) | ECC Type: Non-ECC Unbuffered | Rank: 2Rx8 (Dual Rank x8) | Voltage: 1.35V (DDR3 Low Voltage) | Pin Count: 204-Pin
  • Designed for Dell Latitude Laptops: E6530 | E6430 | E6430 ATG | E6430s | 6430u | E6330 | E6230 | E5530 | E5430
  • Compatible with 2nd & 3rd Gen Intel Core i3 / i5 / i7 and Celeron Processors
  • All A-Tech modules undergo quality assurance testing to ensure dependable and reliable performance
  • A-Tech provides a Lifetime Warranty for all orders & offers complimentary United States based Tech Support before, during, & after your purchase
Rank No. #10
Corsair Vengeance Airflow Memory Cooling Fan CMYAF
  • Bearing Type: Ball bearing
  • Fan Diameter: 60mm
  • RPM: 3500/2500 (using included speed control cable)
  • Noise level: 21.0 dB(A) (25 dB(A) max)
  • Fan life: 80,000hrs/25 degree C
Rank No. #11
PrimoChill Rigid Tubing 45/90/180 Degree Bending Jig Set - 1/2in. OD Tubing
  • Size:1/2 in. OD and 12mm OD rigid tubing (up to 14mm)
  • Designed For Perfect Bends
  • Works for PETG / Acrylic / Copper
Rank No. #12
EKWB EK-FC GeForce GTX FE RGB GPU Waterblock, Nickel
  • Nvidia GPU Waterblock for GTX 1080/1070 Founders Edition Cards
  • G1/4" Threads
  • High Performance Copper Base
  • RGB connector classic 4-pin (12+ R G B)
  • Backplate not included
Rank No. #13
CORSAIR Hydro X Series,XC9 RGB CPU Water Block,16 Individually-addressable RGB LEDs,Software-Enabled,2066/sTR4
  • The CORSAIR Hydro X Series XC9 RGB CPU Water Block combines premium construction, vivid RGB lighting, and extreme cooling performance.
  • The XC9’s nickel-plated copper cold plate and more than 70 high-efficiency micro-cooling fins efficiently draw heat away from your CPU, lowering temperatures and allowing for maximum overclocks.
  • 16 Individually addressable RGB LEDs deliver 360° of stunning customizable RGB lighting effects when combined with a CORSAIR Lighting Node PRO or Commander PRO.
  • Easy to install on Intel LGA 2066 or AMD sTR4 sockets with pre-installed mounting screws and pre-applied thermal material.
  • Socket Compatability: Intel LGA 2011/2066, AMD sTR4
Rank No. #14
Bykski Gigabyte GTX 1060/1070/1080 Full Coverage GPU Water Block - Clear (N-GV1080G1-X)
  • Finest Craftmanship
  • Designed to Fit Standard G1/4 Thread Fittings
Rank No. #15
Patriot Viper 3 Series, Black Mamba, DDR3 8GB (2 x 4GB) 1600MHz Dual Channel Kit (PV38G160C9K)
  • Capacity: 8GB (2 x 4GB) Kit
  • DIMM Type: 240-Pin NON-ECC UDIMM
  • COMPATIBILITY: Before purchase, please confirm compatibility by contacting Patriot Memory at www.patriotmemory.com. Patriot Memory also provides free technical assistance to ensure your purchase is installed and working properly.
  • Voltage: 1.5V; Frequency: PC3-12800 (1600MHz) Timings: 9-9-9-24
  • Feature Overclock: XMP 1.3; Tested Platforms: Intel 6 and 7 Series
SaleRank No. #16
anidees Graphic Card Cooler 3 x80mm PWM Fan, Support ASUS Aura SYNC/MSI Mystic Sync/ASROCK Aura RGB/GIGABYTE RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL
  • Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans; Sturdy Metal with aluminum brush with PCI mount design for easy installation, fit PCI-E x1/x16
  • 80mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
  • Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
  • PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
  • RF wireless control: allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.
SaleRank No. #17
XSPC Liquid Cooling Easy Cut/Easy Bend PETG Tool Kit
  • Heavy Duty Hose Cutter - The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
  • PETG Easy Bending Tool - This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing)
  • Bending Rubber - Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm)
  • PETG Chamfer Tool - Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
  • PETG Edging Sandpaper - Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
Rank No. #18
Maple Syrup Tree Tapping and Sugaring Starter Kit Value Pack- 10 Taps and 10 3-ft Food Grade Tubing Drop Lines - Everything You Need to Start Tapping Your Own Sap!
  • Tap your own sap! The maple syrup tree tapping value pack has everything you need to make your own maple syrup!
  • The maple syrup starter kit includes 10 taps and 10 3-ft food-grade tubing drop lines.
  • This value kit is a perfect holiday gift for your outdoor-loving friends and family.
  • Create your own delicious maple syrup! Skip the line at the grocery store and create your own gourmet, homemade maple syrup!
  • Whether you're a first-time or a long-time maple syrup tapper, this value sugaring kit is sure to be your one-stop-shop for all your maple syrup tapping needs!
Rank No. #19
BXQINLENX 8 PCS PETG Tubing Cut and Bending Tool kit OD 14MM ID 10MM (8 PCS)
  • LENX 8 PCS PETG Tubing cut and bending tool kit
  • Flexible and Resistance to bending.
  • Very easy to cut and install to use.
  • Bending tool work for OD 14MM ID 10MM PETG Tubing.
  • Sold by LENX
Rank No. #20
PrimoFlex Advanced LRT 3/8in. ID x 5/8in. OD Tubing Bundle (10ft Pack) - Crystal Clear
  • Primoflex Trusted/Experienced Brand
  • Inner Diameter:3/8 inch / Outer Diameter:5/8 inch/ Wall thickness: 1/8in
  • Glass-like transparency (Clear LRT) / Logo Free (no print on tube)
  • Includes FREE Liquid Utopia and SysPrep–Cooling Loop Pre-Treatment

Last update on 2020-10-20 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Gtx 980 Water Cooling Kit for our consumer to review. The reports above show ratings of the best overal, best cheap Gtx 980 Water Cooling Kit to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.