The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Gps Neo M8N Arduino of 2020 – Consumer Guide & Reviews

Rank No. #1
DEVMO NEO-7M GPS Satellite Positioning Module with SMA Antenna Interface Compatible with Ard-uino STM32 C51 Replace NEO-6M
  • ★Get 51 Ard-uino STM32 microcontroller routine.
  • ★with a USB interface, you can watch the computer positioning effect directly phone line.
  • ★with the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.
  • ★with SMA interface can be directly connected to an active antenna SMA.
  • ★TTL level, compatible with 3.3V/5V systems. TTL level, compatible with 3.3V/5V systems.
Rank No. #2
NEO-6M NEO-7M Double Sided GPS Mini Module NEO-M8N Satellite Positioning Microcontroller SCM MCU Development Board for Arduino (NEO-6M)
  • Compatible with 5V/ 3.3v voltage, suitable for various single chip microcomputer.
  • Equipped with rechargeable backup battery, it can temporarily keep the ephemeris data when power is off, and improve the speed of hot start positioning.
  • It has IPEX and SMA antenna interfaces, which can be connected with various active antennas.
  • Supporting satellites: GPS satellites, beidou satellites, GLONASS satellites (the default is the combination of GPS+GLONASS satellite, and the combination of GPS+ beidou satellite or GPS+GLONASS satellite can be set.)
  • Output level: serial communication TTL level
Rank No. #3
DingPeng GPS Mini NEO-7M Satellite Positioning Module for Arduino STM32 GPS Mini Module Neo-m8n Satellite Positioning Controller Drone FPV GPS Module
  • Output level:serial communication TTL level,Compatible with 5V/3.3v voltage,suitable for various single chip microcomputer.
  • Default output baud rate:9600
  • Default output frequency:1Hz
  • Output protocol:nmea-0183
  • Supporting satellites:GPS satellites,beidou satellites,GLONASS satellites
Rank No. #4
GPS+BDS Beidou Dual-Mode Module Flight Control Satellite Positioning Navigator ATGM336H Replacement for arduino NEO-M8N
  • The goods are of good quality.
  • 85% conventional orders will be delivered within 7-18days.Some remote countries will take longer.We provide DHL expedited service. The time limit is 3-7 days. (Excluding preparation time.) If the order amount is more than 150$, we will use the DHL service free of charge.
  • We offer tens of thousands of electronic accessories and modules. You just need to search for keywords in my store.
  • If the packages not be delivered on time or the products may not be satisfactory. You just need to send a refund request, we will full refund for you without asking.
  • We make every effort to provide customers with satisfactory service.
Rank No. #5
Acxico 1Pcs NEO-8M GPS Satellite Positioning Module Development Board for Arduino STM32 C51 Replace NEO-7M
  • Get 51 Arduino STM32 microcontroller routine.
  • With a USB interface, you can watch the computer positioning effect directly phone line.
  • With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.
  • With SMA interface can be directly connected to an active antenna SMA.
  • Supply Voltage: 3-5v;Size:39*25.5mm
Rank No. #6
GPS Module GPS NEO-M8N BDS Compass Module(3 in 1) Drone Microcontroller, GPS Receiver with High Precision APM Flight Control Pixhawk Navigation Module for APM PIX PX4, I2C Compatible with MWC
  • Note: The product operation guide is obtained in roduct guides and documents. This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. Please make sure the GPS module is in the open position when using
  • Main chip: U-B-LOX M8030 KT, Built-in TCXO, which maintain good consistency in the temperature of -40 ℃ ~ +85 ℃; Tracking channels: 72
  • Three in one Function: Support GPS BDS dual-mode positioning, plus compass chip! Let you realize the desire of one module can be used in many ways
  • Wide range of use: for APM flight control, PIX flight control, PX4 flight control; The outlet terminal is directly compatible with the APM serial port and I2C port. Plug and play other flight controllers are also available, such as MWC flight controller
  • Positioning; Auto-positioning: 2.5m [in average]; Auxiliary positioning: 2m [average], with SBAS assistance; Drift: <0.02m / s; Timing accuracy: 60ns; Reference coordinate system: WGS-84; Maximum altitude: 50000 meters [Please pay attention to atmospheric; Temperature during high-altitude flight, and please open the flight mode]; Maximum speed: 500m / s; Acceleration: <4g
Rank No. #7
BN-880 GPS Module U8 with Flash HMC5883 Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller Geekstory
  • BN-880 is suitable for Open source flight controller, not for flight control with SCM
  • It is dual module compass, with and electronic compass IC HMC5883L
  • This gps module has flash to save configuration. So you do not need to reset next time when you use it
  • DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software
Rank No. #8
DIYmall 6M GPS Module with EEPROM for MWC/AeroQuad with Antenna for Arduino Flight Control Aircraft
  • When you test the GPS module, pls kindly note that you need test it in outdoor wide plain place, not indoor.
  • LED signal indicator,With data backup battery
  • EEPROM power down to save the configuration parameters data
Rank No. #9
Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)
  • Operating voltage: 5V
  • Source wavelength: 650 nm
  • Apply to: for Arduino AVR
  • Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module
  • Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use.
Rank No. #10
VIFLY GPS-Mate Exclusive Power Source for Drone GPS to Prevent VTX Over-Heating Integrated with Lost Drone Alarm Buzzer for RC FPV Drone Black
  • Exclusive power source for drone GPS, just turn on this unit to get satellites lock without powering up your VTX or FC, no more over-heating or burning up your VTX/Vista/AU.
  • Keep the GPS always on, it never looses power until the switch is turned off, so the pilot never needs to get another fix for the whole session.
  • Recharges during normal use, no need to charge it separately, it can be recharged when you are flying the quad.
  • 3.3V/5V GPS switchable. It can work for both 3.3V and 5V GPS unit, select it simply via the switch.
  • Acts as a lost model buzzer, VIFLY Finder 2 function is embedded that it can work as a standard buzzer or individual beeper when quad battery ejected.
Rank No. #11
ICQUANZX 5PCS DHT22/AM2302 Digital Temperature and Humidity Sensor Module Temp Humidity Monitor 3Pins Module with Cable
  • Model: DHT22; Main Chip: AM2302 high sensitive temperature humidity sensor. Single-bus digital signal output, bidirectional serial data
  • Single bus digital signal output, two-way serial port data
  • Temperature range: -40 to 80 degree celsius, Temperature measurement accuracy: +/- 0.5℃ degree celsius
  • Humidity measuring range: 0~100%RH, Humidity measurement accuracy: ±2%RH
  • With fixing screw hole, convenient to install and fixed
Rank No. #12
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
  • Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor
  • Data output over I2C
  • Absolute orientation, angular velocity, acceleration, magnetic field strength, linear acceleration, gravity, temperature
  • Easy to use Adafruit tutorials
  • Easy soldering of header pins required
Rank No. #13
ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
  • The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
  • Lcd1602 module with pin header (not need to be soldered by yourself)
  • This is the upgraded starter kits with power supply module, 9V battery with dc
  • High quality kit with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.
SaleRank No. #14
DIYmalls BN-880 GPS Module w/Flash HMC5883 Compass + GPS Active Antenna Support GPS Glonass Beidou for Arduino Raspberry Pi Pixhawk Betaflight CC3D F4 Flight Control
  • bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
  • bn880 gps module is suitable for Open source flight controller, not for flight control with SCM. When you use it for Raspberry Pi, there is no driver needed but you need to install software
  • bn 880 gps module has flash to save configuration. So you do not need to reset data when you use it next time.
  • You can buy more bn180 bn220 gps here, https://www.amazon.com/nextion
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question".
Rank No. #15
ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL Compatible with Arduino IDE
  • The MEGA complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
  • Free pdf tutorial in the cd (more than 35 lessons)
  • Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
  • Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
  • We have always cared about the customer experience and improve the product function details
Rank No. #16
UAV Ground Control Points (GCPs)/Disposable Aerial Targets for Aerial Mapping & Drone Surveying (100 Pack)
  • 16"x16" size easily visible in drone photographs up to 400' above ground
  • Biodegradeable materials means you don't have to pick up your GCPs after a project
  • Pink & green color pattern optimized to stand out during GCP marking in photogrammetry
  • Matte finish reduces glare and improves visibility
  • Thick cardstock construction optimized to withstand a light breeze with only a single nail
Rank No. #17
ACEIRMC GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight
  • This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make sure that the GPS module is in an open location.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • This GPS Module is great for vehicle-mounted, handheld devices such as PDAs, vehicle monitoring, mobile phones, camcorders and other mobile positioning systems sharing bike, sharing mobile power etc.
Rank No. #18
BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control Geekstory
  • BN-220 has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
  • The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find "Sold by Geekstory" under Buy Now button), in the new page, click “Ask a question” to email us
Rank No. #19
Readytosky M8N GPS Module Built-in Compass with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 APM 2.6 2.8 Flight Controller
  • ★★★Special designed for Pixhawk 2.4.6 2.4.8 flight controller,ASIN:B07CHQ7SZ4.(Note:If you use it to APM Flight Controller, Please replace the connect by yourself.)
  • ★The ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy.
  • ★A new generation M8N GPS,with low power consumption and high precision.
  • ★The GPS light only can light up when it search the satellite signal outdoor; ROM already been fix,it cannot be flash and change.
  • ★★★ Attention: the GPS can only use in Pixhawk and APM Flight controller,it can't work with other flight controller.
SaleRank No. #20
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.

Last update on 2021-11-06 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Gps Neo M8N Arduino for our consumer to review. The reports above show ratings of the best overal, best cheap Gps Neo M8N Arduino to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.