The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Gas Fireplace Heat Deflector of 2020 – Consumer Guide & Reviews

Rank No. #1
Adjustable Fireplace Hoods
  • Adjust From 28" - 48"
  • 4-1/2" wide
  • Approximately 3 1/2" high
  • Surface mount
Rank No. #3
HY-C FAH-BLK Fireplace Vent Hood
  • Improves the heat output of your fireplace while protecting your mantel and surrounding areas
  • Reduces required mantel clearances for vent-free and vented gas logs
  • Black powder coat finish increases durability and reduces scratch during installation
  • Adjustable style fits most fireplace openings (28. 5” to 48”)
  • Masonry and non-masonry mounting hardware included. Made in the USA.
SaleRank No. #4
Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier, 12" x 24"
  • Protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat
  • Made up of woven silica with a flexible aluminized finish
  • Highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000 degrees Fahrenheit
  • Adhesive backed side handles direct and continuous temperatures up to 300 degrees Fahrenheit
  • Can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance
SaleRank No. #5
HY-C FB2020 Fireback, Stainless Steel Painted Black, Adjustable Installation, Protects Firebox, 20" x 20"
  • Protects the structural integrity of your firebox from premature cracking and degradation; Measures 20" x 20"
  • Boosts your fireplace's heat output by reflecting more of the fire's heat into the room and not up the chimney
  • Slotted base allows for adjustable installation from 65 to 90 degrees; 14 gauge stainless steel construction, instead of cast iron, results in a lighter weight for easy placement and a less expensive fire back
  • Black painted finish may peel or crack due to extreme heat; Firebacks may be cleaned, lightly sanded and painted with a high temperature paint
  • Easy to install - No tools required for installation; Made in the USA.
Rank No. #6
Extended 42 inch Fireplace Hood - Matte Black
  • For use with - The Empire Breckenridge 42-Inch firebox
  • Finish - Matte Black
SaleRank No. #7
HY-C Smoke Guard for 28.5 to 48-Inch by 4-Inch Fireplaces, Black Powder Coat
  • Fixes flue-to-firebox ratio problems
  • Spring loaded for easy installation
  • Heat resistant adhesive caulk (included); seals smoke guard in position
Rank No. #8
Black Adjustable Fireplace Hood Heat Shield 28" - 48" ELH-1 - by Mogullifestyle
  • ❋ This Black Adjustable Fireplace Hood expands from 28" to 48" long. It is 4 1/2" deep. It is quite useful in keeping the heat generated from your gas fireplace from rising upward and damaging items above your fireplace. The 4 1/2" depth of this hood acts as a heat shield.
  • ❋ ​Adjustable from 28" - 48" wide
Rank No. #9
RH Peterson Co. Contemporary Three Panel Satin Stainless Steel Fyreback - 24 inch
  • Three-panel heat shield for gas fireplace
  • 20-gauge stainless steel construction for superior durability
  • Contemporary design; Satin stainless finish
  • Increases heat radiation throughout the room for more efficient operation
  • Size: 24 inches
SaleRank No. #10
Midwest Hearth Remote Receiver Cover Heat Shield for Gas Logs and Fireplaces
  • All metal construction lined with insulation
  • Cut-outs provided on back and side for routing wiring
  • Provides additional protection against heat
  • Inside dimensions measure 2.5"w x 1-3/8"h x 2.25"d
  • Heat shield only, receiver not included
Rank No. #12
SHINESTAR 65505 7622 Heat Deflectors for Weber Genesis 300 Series, Genesis E/S-310, E/S-320, E/S-330 Replacement Grill Parts, Long Lasting Stainless Steel, 2-Pack
  • Perfect replacement for Weber Genesis E/S-310, 320 & 330 Series (2011 - 2016) with Front-Mounted Control Panel
  • The main purpose of SHINESTAR stainless heat deflectors is to redirect drippings away from the burners
  • SHINESTAR 65505 heat deflectors will help to minimize flare up providing a safer cooking enviroment
  • Installed below the burners
  • Each deflector measures 13-1/4" front to back by 8-3/4" wide. Includes two (2) stainless steel metal heat deflectors
Rank No. #14
Home Intuition Adjustable Magnetic Heat and Air Deflector for Vents, Sidewall, and Ceiling Registers, 2 Pack
  • 5 YEAR MONEY BACK GUARANTEE. You have nothing to worry about because we have got you covered. Our money back guarantee provides you with the comfort you deserve to make sure your money was well spent and the best part is if your not satisfied we'll return
  • WIDE RANGE OF MOVEMENT. We provide you with the ability to extend and retract between 10” – 14” in order to make sure you still have the proper width and fit resulting in maximum effectiveness.
  • LONG LASTING and MONEY SAVING. Our heat and cold air deflectors are built from heavy duty plastic and super strong magnets delivering both quality and performance you deserve when making any purchase. An evenly heated or cooled room is one that will save you money and over handling your units making sure you don’t push your HVAC system to a point where it is overworking and can lead to overheating and hefty service call fees.
  • SIMPLE CLASSIC DESIGN. A combination of transparent material and low profile design will make sure your home, office, or personal space doesn’t seem to have any odd decorations hanging from your vents allowing you to keep things looking clean and uncluttered
Rank No. #15
A-Team Performance 13575 Adhesive Backed Aluminized Fiberglass Heat Shield Barrier Up To 2000 Degrees Fahrenheit Multi-Purpose Compatible with Firewall Hoods Hoses and Doors 12" x 24"
  • Withstands Extreme Heat — Made with aluminized finish which is flexible and durable woven silica, this Aluminized Adhesive Backed Heat Barrier can withstand scorching temperature above 2000 degrees Fahrenheit. Its reflective surface can still screen off the heat and provide utmost protection.
  • Easy-To-Apply — Innovatively designed with adhesive composite on its back, application is made easier than ever. It can be easily wrapped or laid on to any desired surfaces with a professional-like finish; also a penny-saver from hiring service.
  • Multi-Purpose Adhesive Backed Heat Barrier — No matter what area of your Automobile or Home needs heat prevention; this barrier can be of sure help. May it be plastic components, painted surfaces, hoses, firewalls, doors, hoods, and a lot more.
  • Reflective Aluminized Heat Shield — Capable of reflecting 90% of radiant heat
  • Package Inclusions — 1 x A-Team Performance 13575 Adhesive Backed Aluminized Fiberglass Heat Shield Barrier Up To 2000 Degrees Fahrenheit Multi-Purpose Compatible with Firewall Hoods Hoses and Doors 12" x 24"
Rank No. #16
Stainless Steel Firebacks, Painted Black - 16" x 18"
  • Adds protection and efficiencies to your fireplace
  • Aesthetically enhances your hearth and provides both efficiency and protection when positioned against the fireplace back wall
  • Radiates heat and reflects light from the fire into the room
  • Slotted base allows for adjustable installation from 65-90 degree angles
  • Assembly required
Rank No. #17
Midwest Hearth Adjustable Rod and Valance Kit for Fireplace Spark Screens (Newest Version)
  • ADJUSTABLE - Fits masonry fireplace openings from 36" wide to 48" wide.
  • DECORATIVE - Hides the curtain rod and rings behind a tasteful smooth black valance panel.
  • DURABLE - Hand made in the USA. Steel construction. Durable powdercoated finish resists high temperatures.
  • COMPLETE KIT - Includes 1 central valance, 2 expansion pieces, 2 hanging rods, 2 end stops, 4 masonry screws, and instructions.
  • SCREEN COMPATIBILITY - Please choose a screen that is 2-inches shorter than your fireplace opening when using this kit.
SaleRank No. #18
Minuteman International Fleur De Lys Cast Iron Fireback
  • Measures 20-in W x 16-in H
  • Made of Cast Iron with Matte Black finish
  • Decorative firebacks protect the firebox wall and radiate heat back into the room
  • This fireback may be used directly on the hearth floor, or with feet if additional height is desired
  • Use Minuteman International Fireback Supports (X670130) or Fireback Feet (CFB-F)
Rank No. #19
Frost King HD5 Heat Deflector, Multi-Purpose, Clear Plastic with Magnetic Hold for Central Forced Air Systems, Adjustable 10" to 14"
  • Manufacturer: there'll
  • Manufacturer part Number: HD5
  • Heat/air deflector 10Extend to 14- 503220
  • Economy Heat. And Air Deflector
  • In Winter, The Curved Magnetized Deflector Directs Warm Air Down For Improved Heating
Rank No. #20
Aluminum & Fiberglass Heat Shield Barrier with Adhesive Backing 12"x39" (3.3 Sq. Ft)
  • Professional-Grade Heat Shield
  • Size: 3.3 Sq. Ft (39 x12 Inch)
  • Adhesive layer for easy installation
  • Offers protection from temperatures up to 850 degrees Fahrenheit
  • Preserves the life of fairings and race bodywork

Last update on 2021-04-03 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Gas Fireplace Heat Deflector for our consumer to review. The reports above show ratings of the best overal, best cheap Gas Fireplace Heat Deflector to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.