The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Fuel Tech Efi of 2020 – Consumer Guide & Reviews

Rank No. #1
FI-TECH 30002 Fuel Injection System
  • Suitable for up to 650hp
Rank No. #2
FI-TECH Command Center 2.0 Fuel Pump Module Sump
  • A submerged pump runs cooler than an external pump
  • Compatible with any other competitive aftermarket or factory EFI installation
Rank No. #4
Orion Motor Tech Fuel Pressure Gauge, Fuel Injection Pressure Tester with 140PSI 10Bar Scale, Professional Fuel Pressure Test Kit for All Fuel Injection Systems and Most Cars Trucks Vans and ATVs
  • UNIVERSAL FUEL PRESSURE TESTER: Orion Motor Tech's fuel test gauge kit includes an easy-to-read dual gauge and all the hoses, fittings, and adapters necessary to connect with and test the fuel pressure on most import and domestic gas vehicles including cars, SUVs, and trucks
  • ACCURATE READING: The 4-inch fuel pressure gauge tester features a shockproof rubber casing and a large dual-scale dial with readings in both psi (to 140) and bars (to 10) for easy and accurate work on both American and metric systems
  • QUALITY MATERIALS: All the connectors in this fuel injection tool set are manufactured from high-quality brass and aluminum for durable strength and long-term corrosion resistance; the rubber hoses endure torsion and temperature and pressure extremes to ensure safe use
  • PRECISION ENGINEERING: The fine threading and sealing rings give you a snug fit every time, while the pressure release valve and long drain hose safely release pressure and recover fuel flow once your testing is complete
  • QUALITY ASSURANCE: Look to OMT for the finest craftsmanship and the most reliable fuel injection testing tools, rigorously tested and backed with our usual strong warranty and friendly 24/7 customer service, ensuring years of satisfied use!
Rank No. #6
K&N PF-1000 Fuel Filter
  • Superior Construction
  • Low Restriction
  • Large Capacity
  • Outstanding Filtration
  • Outside Diameter 2.125 in (54 mm)
Rank No. #7
Fuel Tool EFI Check Valve Lower O-Ring - MC200-5
  • Made of DuPont made with Viton
  • Eliminates the need for replacing expensive valve and fuel line when only the O-ring is needed
  • made with Viton lower O-ring for H-D check valves on fuel injected models
SaleRank No. #8
Chevron Techron Concentrate Plus Fuel System Cleaner - 20 oz.
  • Cleans, restores, protects the entire fuel system (fuel injectors, carburetors, intake valves and combustion chambers)
  • Restores: Lost power, acceleration, lost fuel economy, and operation of the fuel gauge sensor
  • Reduces: Rough idle, engine surge, hesitation, and spark plus fouling
  • Improves: Cold start performance, and fuel stability for up to one year
Rank No. #9
Hidden Horsepower- Carb vs EFI where does the power hide?
  • Amazon Prime Video (Video on Demand)
  • English (Playback Language)
  • English (Subtitle)
Rank No. #10
  • LS1/LS2/LS6
  • With Transmission...
  • 500 HP The Ultimate LS1/LS2/LS6 500HP Intake Manifold Kit with 92mm throttle body and trans control are a complete self-tuning induction systems for LS engines designed for the do-it-yourself hot rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and...
Rank No. #12
Range Technology Active Fuel Management Disable Device (Blue)
  • Keep your vehicle in V8 mode! Disable 4 cylinder mode on all GM Active Fuel Management Vehicles.
  • Installs in seconds! Plugs into diagnostic port with no tools needed.
  • Does not reprogram factory ECU. Leaves no trace.
  • Full power all the time. Increased throttle response and more consistent power delivery across the entire power band.
  • Best for high load scenarios, such as towing, off-road, icy or snowy conditions or high speed commuting.
Rank No. #13
JDMSPEED Universal 12V Heavy Duty Electric Fuel Pump Metal Solid Petrol 12 Volts
  • JDMSPEED Universal for gasoline or diesel engine
  • Voltage : 12V Current : andlt;1.8A
  • Output Pressure : 3-6 PSI
  • Installation hole distance : 2.638 inch (6.7cm); Tubing Interface: 0.315inch (0.8cm)
  • Flows : andgt; 70 L/H Pressure : 0.032-0 .045 MPA
SaleRank No. #14
Russell 650133 Black Competition Fuel Filter
  • Fit Type: Vehicle Specific
  • Package Dimensions: 5.334 H x 13.716 L x 8.89 W (centimeters)
  • Country of Origin : United States
  • Package Weight: 0.200 pounds
Rank No. #15
Holley 550-511K Sniper EFI Self-Tuning Master Kit
  • Bolt on carburetor replacement (designed to fit single & dual carb manifolds)
  • Throttle body mounted ECU - no extra boxes to mount
  • Supports up to 650HP (4 Injector version) and 1250HP (8 Injector version)
  • 4wire vehicle connection (battery + battery - switched ignition & RPM)
  • Integrated fuel pressure regulator
Rank No. #16
  • Fit type: Vehicle Specific
  • Package Weight: 5.205 kilograms
  • Package Dimensions: 19.3 L x 36.7 H x 29.7 W (centimeters)
Rank No. #17
EVIL ENERGY External Fuel Pump 300LPH High Flow 12V 145psi Universal Fit for AN10 Inlet / AN6 Outlet
  • The electric fuel pump kit comes with universal hardware to fit multiple vehicles models. Item included: 1pc 300LPH high flow external fuel pump, 1pc internal fuel filter (already fitted), 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs spring washers, 1pc flat washer, 1pc 6AN male outlet adapter, 1pc 10AN male inlet adapter and 1pc instruction.
  • Compatible Fuel: gasoline, pump gas, race gas, diesel, E85 and alcohol/ethanol. The supply voltage will affect the fuel delivery of the EVIL ENERGY external inline fuel pump. Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F
  • Easy to install. Since it does not require dropping the fuel tank, fuel pump placement and fuel line routing is critical. Recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than your fuel tank, prohibits fuel flow to the pump and forces fuel to be drawn up to it. This causes the pump to work harder run hotter and can cause air to enter the fuel line will result in damage to the fuel system.
  • The EVIL ENERGY 300LPH High Flow Fuel Pump designed to be used externally or as an in tank installation. A pre-filter rated at 100 microns MUST be used. Failure to use a suitable pre-filter will result in premature failure of the pump.
  • Notice: EVIL ENERGY fuel pump only fit 12-volt DC batteries car. This fuel pump is intended for electronic fuel injection systems only. It is not suitable for carbureted engines. Before starting the engine, ensure there are no leaks at any point in the fuel system. Before wiring the pump to the electrical system make sure the polarity is correct.
Rank No. #18
FAST 30226-06KIT EZ Fuel Self-Tuning Throttle Body Injection Kit
  • No software necessary; intuitive self-learning system will work with only a few simple questions answered.
  • Supports up to 650 HP
  • Regardless of brand or engine size, the EZ-EFI Fuel Base Kit bolts onto any carburised manifold, works with your original carb-style throttle linkage and includes all OEM sensors. The EZ-EFI Fuel Base Kit includes fuel injectors, fuel rails, a clearly labelled wiring harness, hand-held device, sensors, ECU and 4150 throttle body, which mounts onto any 4150-type intake manifold.
  • Made in USA
  • Colour Touchscreen Hand-Held Unit provides the only necessary interface to the ECU.
Rank No. #19
EVIL ENERGY 6AN 3/8" PTFE EFI LS Fuel Injection line Fitting Kit Stainless Steel Braided 25FT
  • The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced.
  • The 6AN PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel line length: 25Ft, Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!
  • 25Ft 6AN braided fuel injection line kit includes fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, 2pcs 6AN to 1/4"NPT hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 1pc 6AN to 5/16" hose adapter fitting, 1 pc AN6 to 3/8"quick disconnect male.
  • The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use.
  • A PTFE tube has less volumetric expansion than a rubber tube and is non age sensitive for an unlimited shelf life. Professional installation is highly recommended. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to provide quality product and service.
SaleRank No. #20
GM Genuine Parts TR26 Fuel Tank Lock Ring (Right)
  • Help seal out contaminants
  • Help retain fuel tank sending unit
  • GM-recommended replacement part for your GM vehicleâ€s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function

Last update on 2021-08-03 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Fuel Tech Efi for our consumer to review. The reports above show ratings of the best overal, best cheap Fuel Tech Efi to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.