The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Fuel Tank Inlet Check Valve of 2020 – Consumer Guide & Reviews

Rank No. #1
Dorman 577-106 Fuel Tank Roll Over Valve for Select Chevrolet/GMC Models (OE FIX)
  • Saves money - this fuel tank roll over valve allows direct replacement of only a failed valve, rather than the entire tank
  • Upgraded material - aluminum construction prevents similar failures from original plastic design
  • Easy installation - 2 washers, 1 gasket, 1 threaded fastener and 1 installation wire included
  • Application specific - made to replace the original valve on certain Chevrolet and GMC vehicles
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
Rank No. #2
kipa RV City Water Fill Inlet Flange Brass RV Water Hookup Connector FPT 1/2" Female Thread 3" Flange White, with Check Valve backflow Preventer in City Water Connection
  • City water connect inlet Hook Up Flange Replace for OE Part Number A01-0169LF, Use For Many Trailer Marine RV Camper Connection to city water hoses.
  • Specification: Connect to FPT 1/2" threaded pipe on inside, flange Female thread 3"
  • With check valve backflow preventer in city water hose connection & press-in dust plug as pictured
  • Durable Well-Sealed water Flange Hook Up Flange is used for connection to hook to the City garden hoses.
  • City Water fill inlet flange, Important: If the angle of the Flange is not installed properly, It will result the Valve easily to be damaged because of the incorrect installed Physical angle. Thus, PLEASE Do make sure they are well setttled. Thanks
SaleRank No. #3
ACDelco GM Original Equipment 12690512 Vapor Canister Purge Valve , Black
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
Rank No. #4
AC PERFORMANCE Aluminum Flare Metric M12 x 1.5 to -6 AN Male Check Valve with Spring Design Inside Parts, AN6 Non Return One Way Check Valve with M12 Washer, Designed for Bosch 044 Fuel Pump
  • Inlet Size: M12 x 1.5 Male Flare, Outlet Size: -6 AN Male Flare (9/16 x 18), One Way Check Valve with Spring Design Inside Parts, Made of Aluminum Alloy
  • Positive Seal, High flow capacity and Positively Stops Fluid From Returning
  • ANTI-LEAK, ANTI-BACKFLOW -- When installed correctly (check the arrow on the piece to know the correct side.Suits Fuel Pressure Systems, Oil Pressure Systems, Transmission Cooling lines, Air Systems, Fuel Cell Breather (With Cracking Spring Removed)
  • Black anodized finish,Opening housing is secured with an O-ring for a perfect seal & to stop it coming loose with vibration.These one way poppet valves perfect all fuel applications
  • Precision machined to ensure precise thread engagement
Rank No. #5
AC PERFORMANCE Black Aluminium -6 AN to AN6 Flare Inline Check Valve with Spring Design Inside Parts, Non Return One Way Check Valve Male Hose Fitting, Full Length 56.8MM, 9/16"x18 Thread
  • Inlet Size: -6 AN Male Flare Outlet Size: -6 AN Male Flare (9/16"x18), One Way Check Valve with Spring Design Inside Parts, Full Length 56.8MM, Made of Aluminum Alloy
  • Positive Seal, High flow capacity and Positively Stops Fluid From Returning
  • Suits Fuel Pressure Systems, Oil Pressure Systems, Transmission Cooling lines, Air Systems, Fuel Cell Breather (With Cracking Spring Removed)
  • These one way poppet valves perfect all fuel applications
  • For Aquariums - Positive Seal, Sturdy, Reliable, Anti-Leak, Anti-Backflow, Non-Return CO2 Air Valve That Ensures One Directional Water Flow
SaleRank No. #6
ACDelco Genuine GM Parts 15131046 Fuel Tank Filler Hose
  • Designed, engineered and tested for GM vehicles
  • Precise fit for ease of installation
  • For proper installation, locate your nearest GM dealer, independent service center, or body shop
  • Fit Type: Vehicle Specific
Rank No. #7
ACDelco GM Original Equipment 13502903 Fuel Tank Pressure Sensor
  • Help measure pressure changes within fuel tank
  • Help alert engine management computer if a leak occurs in fuel system
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function.3 spade terminals
Rank No. #8
Fuel Filter/Regulator 4 BAR with -6AN Inlet and Outlets Stainless Steel for LS swaps and EFI conversion
  • Fuel filter & pressure regulator for LS swap with no adapter fittings required.
  • 58 PSI (4 BAR) regulated pressure output, perfect for LS swaps and many EFI conversions.
  • Aftermarket 5 micron fuel filter and pressure regulator manufactured with AN -6 inlet and outlets.
  • Connect directly to your -6AN hose or hard line.
  • For custom/aftermarket application only. AN-6 ends will not fit hoses in original GM application.
Rank No. #9
Spectra Premium FN729 Fuel Tank Filler Neck
  • Built to meet or exceed manufacturer's specifications
  • Drop-in fit for easy installation
  • Dual coated for enhanced corrosion protection
  • Spectra Premium Filler Necks undergo a 500 hour durability salt spray test
  • Prevent expensive fuel leaks and unnecessary comebacks
Rank No. #10
Spectra Premium FN724 Fuel Tank Filler Neck
  • Unit is designed to original equipment (OE) fit, form and function requirements
  • Fit tested on vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Dual coated for enhanced corrosion protection
  • Unit is leak tested after production to ensure product in free from fuel and/or evaporative leaks
  • Tested with original equipment (OE) fuel cap to prevent EVAP and check engine light failure
Rank No. #11
Raybend,"Silent" Sump Pump Check Valve, 1-1/2"
  • Sump Pump Silent Clear Check Valve MODEL RFF15NC
  • Clear valve body so that water movement is visible
  • The unique Stainless Steel spring loaded flapper eliminates the nuisance water hammer noise of standard check valves
  • 100% Stainless steel clamps included-fits 1-1/2" pipe
  • 1 year warranty
Rank No. #12
Valterra P23415LF 1/2" Lead-Free Check Valve
  • Freshwater backflow preventer
  • Durable brass construction
  • 100% lead-free
  • Check Valve Size: 1/2"
  • Style: MPT x MPT
Rank No. #13
Spectra Premium FNH015 Fuel Tank Filler Neck Hose
  • Manufactured with high quality rubber to ensure it maintains its dimensional characteristics even in extreme cold/hot weather variations seen in the North American market
  • Original Equipment (OE) design to ensure exact fit, form and function
  • Fit tested to ensure ease of installation
  • Part is tested to ensure it meets the same requirements as Original Equipment (OE) specifications
  • Compatible with all fuel types the vehicle is designed for
Rank No. #14
Muzzys 8mm, 5/16", Fuel Check Valve, Inline, One-Way, Non-Return, Aluminum, WITH CLAMPS, for Water, Gas, Diesel, Oils, on UTV, Quad, Snowmobile, Motorcycle, Jetski, Mower, Blower, Car, Truck, Tractor
  • For Use With: 8mm (5/16") ID (inner diameter) hose. Valve can safely be used with water, fuel, gas, diesel, and oils.
  • Includes: (ONE) check valve and (TWO) high quality stainless steel smooth edge band clamps that will not cut into your hoses
  • Valve is made from high quality aluminum and measures about 2.36 inches long by .86 inches wide
  • Universal: Can be used on any UTV, Side by side, Quad, Dirtbike, Jetski, Waverunner, Boat, Truck, Car, Motorcycle, Tractor, Camper, Lawn Mower, Blower, Pressure washer, etc...
  • Arrow marked on valve, showing fluid flow direction. Prevents fuel from returning back to the tank and keeps it in the line. Will solve hard/slow starting issues by keeping fuel at the carburetor.
Rank No. #15
Exergy Performance CP4.2 Inlet Metering Valve (FCA/MPROP) Fuel System Saver Improved Stock Inlet Metering Valve E05 10505 Compatible with 2011-2016 Chevy Silverado/GMC Sierra 6.6 LML Duramax Diesel
  • The CP4 Pump is prone to failure if the fuel system has any water or contaminated fuel introduced to it. When the pump fails, it will send metal contaminants throughout the entire fuel system which in most cases will ruin the injectors and other sensors and cost you several thousand dollars.
  • The System Saver Inlet Valve was designed to offer you peace of mind in the event of a CP4 Pump failure. The important difference between the OEM valve and the System Saver is the improvement made to the screen, which is upstream of the valve inlet. The OEM screen is a single 80 micron layer, and is a very flimsy design. In extreme cases the factory screen can actually tear, introducing massive amounts of debris (from the failed pump) into the injectors.
  • The System Saver Valve screen is rated at 25 microns and is wrapped in two layers. This improved micron rating and double wrap construction will do a much better job of keeping debris from entering the rest of the fuel system. It is also constructed in a manor where it will not be able to tear or de-laminate from the filter housing.
  • Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure. This will choke off the valve sooner, which will bring the truck out of service and shut it down in a shorter amount of time. This is all positive for improving the chances injectors won't need to be replaced when a pump has failed.
  • Exergy has also flow tested the valve with the upgraded filter and there is no measurable loss of pump performance with the finer screen, even with a 10mm stroker CP4 pump at 4500 RPM. The screen and housing are constructed from stainless steel for corrosion resistance. And, as always, you can trust that Exergy products have been properly de-burred and are assembled using appropriate processes to ensure proper cleanliness.
Rank No. #16
APDTY 688839 Replacement Filler Neck For Fuel Replaces 8C3Z9034KE, 8C3Z9034KF
  • Meets Or Exceeds OEM Specs
  • Factory OEM Fit Form And Function
Rank No. #17
EVIL ENERGY External Fuel Pump 300LPH High Flow 12V 145psi Universal Fit for AN10 Inlet / AN6 Outlet
  • The electric fuel pump kit comes with universal hardware to fit multiple vehicles models. Item included: 1pc 300LPH high flow external fuel pump, 1pc internal fuel filter (already fitted), 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs spring washers, 1pc flat washer, 1pc 6AN male outlet adapter, 1pc 10AN male inlet adapter and 1pc instruction.
  • Compatible Fuel: gasoline, pump gas, race gas, diesel, E85 and alcohol/ethanol. The supply voltage will affect the fuel delivery of the EVIL ENERGY external inline fuel pump. Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F
  • Easy to install. Since it does not require dropping the fuel tank, fuel pump placement and fuel line routing is critical. Recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than your fuel tank, prohibits fuel flow to the pump and forces fuel to be drawn up to it. This causes the pump to work harder run hotter and can cause air to enter the fuel line will result in damage to the fuel system.
  • The EVIL ENERGY 300LPH High Flow Fuel Pump designed to be used externally or as an in tank installation. A pre-filter rated at 100 microns MUST be used. Failure to use a suitable pre-filter will result in premature failure of the pump.
  • Notice: EVIL ENERGY fuel pump only fit 12-volt DC batteries car. This fuel pump is intended for electronic fuel injection systems only. It is not suitable for carbureted engines. Before starting the engine, ensure there are no leaks at any point in the fuel system. Before wiring the pump to the electrical system make sure the polarity is correct.
Rank No. #18
Milton (S-684-4) 1/4" MNPT Male Tank Valve
  • INCLUDES: Standard valve core and plastic cap. Overall length (with cap): 1.5 inch.
  • DESIGNED: For use with air compressor tanks to fill vessels with air.
  • IDEAL: Tank valve prevents air from leaking out while allowing for air to pass through for inflation.
  • NPT: 1/4" Male national pipe thread. Cap thread size: .305-32.
  • MAXIMUM AIR PRESSURE: 200 pounds per square inch (PSI).
SaleRank No. #19
Dorman 911-082 Vapor Canister Purge Valve for Select Models
  • Direct replacement - this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle's evaporative emissions system
  • Quality construction - manufactured from premium materials for a long service life
  • Excellent value - original equipment quality at a lower price
  • Quality tested - has undergone testing to ensure proper fit and performance
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
Rank No. #20
EVIL ENERGY 1/4" 6mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2
  • Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel from returning back to the tank and keeps it in the line. In this way, this product can perfectly solve the problem that your vehicle is hard or slow starting issues
  • Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high reliability. The push lock design of the connector stop the hose from sliding off and easy to connect. Surface anodized for great appearance and anti-corrosion, superior thread strength
  • One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way. Suitable for water, petrol, diesel, oil, and other fluids. Note:This fuel non return one way check valve cannot be used in methyl alcohol because formic acid will be produced while it is powered on, which will lead to the uselessness
  • Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure the pipes don't drop off. The main advantage of a non-return check valve is its simple design. This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient
  • The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar) Operating temperature: -30 ℃ - 130 ℃. Six-month warranty provide by EVIL ENERGY. We value your shopping experience and strive to offer a high-quality product and service

Last update on 2021-11-06 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Fuel Tank Inlet Check Valve for our consumer to review. The reports above show ratings of the best overal, best cheap Fuel Tank Inlet Check Valve to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.