The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Ford 60 Turbo Rebuild Kit of 2020 – Consumer Guide & Reviews

Rank No. #1
6.0 Rebuild Kit Turbo Lab America 2003-2007 6.0 Powerstroke Turbo Rebuild Kit
  • Upgraded 360 Degree Machined Copper Bar Thrust Bearing
  • Fits 2003 - 2007 6.0 Powerstroke GT37VAS Turbo Charger
  • Highest Quality Brass Bearing
  • Also Fits Powermax Powerstroke Turbo Upgrade
  • Made In the USA
Rank No. #2
PULSAR 2003-2007 6.0 Turbo Compressor Drop In DIY Upgrade Kit
  • Upgrade with the sized .80 A/R compressor housing and the larger 63.5mm billet compressor wheel which flows more air compare to the stock turbo
  • The kit comes with the 360º thrust bearing handles more thrust force over the stock 270º one, both seal rings have staggered step gap which reduce oil from leaking out
  • The kit is designed to fit all stock 6.0 turbos, will the help of the hardwares in the kit, you can install it easily.
  • Fits turbo model: Garrett VGT GT3782VAS Turbo
Rank No. #3
Powerstroke 7.3L GTP38 Turbo Compressor Wheel + Upgrade Rebuild Kit-Stepped Gap Piston Ring 360° Thrust Bearing
  • Direct Bolt on Compressor Wheel, no mods needed for GTP38 and TP38 Turbo.
  • Upgrade Stepped Gap Pistion Ring on Compressor side to eliminate Oil Leak problem.
  • 360° Thrust bearing system for High Boost Applications.
  • Suitable for 1994-2003 Ford Powerstroke 7.3L GTP38 or TP38 Turbo.
Rank No. #4
PULSAR 99.5-03 7.3 GTP38 Turbo DIY Upgrade Kit
  • Upgrade 66*88mm billet compressor wheel provides over 30% air flow than the stock 60*80mm wheel
  • Upgrade 1.0 A/R compressor cover with the ported shround improves compressor flow range for surge control, the matching 4" intake hose is included.
  • Upgrade 360 degree brass thrust bearing system to handle the thrust force, staggered step gap seal rings on both compressor and turbine end eliminating oil leaking risk
  • Fits 1999.5-2003 Ford 7.3L F250 F350 Excursion etc.
  • Wake up your old pickup and enjoy the performance of the kit!
Rank No. #5
PULSAR 2005-2007 6.0 10 Blade Upgrade Whistle Turbine Wheel
  • Top quality Inconel 713c turbine wheel&shaft same material as OE wheel
  • 10 blade upgrade ultra high flow blade design supports higher top end power, less turbo lag and lower EGT's
  • Make the turbo whistle like a music to your ears!
  • Fits 2005-2007 6.0L Stock Size GT3782VA Turbo ONLY
  • Be aware that this turbine wheel does not fit 03-04 6.0L Powerstroke Trucks, Check your wheel size before purchasing.
Rank No. #7
PULSAR Billet Compressor Wheel Rebuild Kit for 94-03 7.3L Turbo
  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible,Spool up faster, Lower EGTs and More Boost!
  • 360 Degree Brass Thrust Bearing System
  • Staggered step gap seal rings on both compressor and turbine ends for a better oil sealing
  • Twin hydrodynamic journal bearings
  • Compatible with all Powerstroke 7.3L OBS/E99/Super Duty TP38/GTP38 turbos
SaleRank No. #8
Yukon Gear & Axle (YP KP-001) Replacement King-Pin Kit for Dana 60 Differential
  • Replacement king-pin kit for Dana 60 differential
  • This is a replacement for Dana Spicer part number 706395-R
  • Includes 1-side pin, bushing, seals, bearings, spring, cap
Rank No. #9
Universal T3/T4 T3 T4 T04E Turbo Kit 350HP Stage III + Wastegate + Intercooler + Piping + BOV + Oil Feed/Return Lines Kit New
  • Package including: 1 x Intercooler, 1 x Universal turbo intercooler piping kit, 1 x Type-S Blow Off Valve (Random color), 1 x 35/38MM Wastegate(Random color), 1 x Turbo Boost Gauge, 1 x Turbo Boost Controller, 1 x Turbo Oil Return / Feeding Line Kit, 5 Blot Turbo Downpie
  • 1 x T3/T4 Hybrid Turbo Charger: 25 PSI, and 500+HP on B series swaps, standard t3/t4 flange, perfect for any 4-6 cylinder applications. Power performance output capability = 25-35 psi. CNC machined flanges.
  • Turbo Specification: Inlet Diameter: 3", Outlet Diameter: 2", Oil Inlet: 1/8 NPT, Compressor Wheel: .55 Trim, A/R Compressor: .50 A/R, A/R Turbine: .63 A/R
  • 5 Blot Turbo Downpie: 2.5" t3/t4 5-bolt stainless steel TIG welded downpipe. Fits all of our turbo kits that feature a turbocharger with a 5-bolt exhaust housing. This provides a simple starter solution for connecting your turbo's exhaust to your existing exhaust system.
  • 1 x Turbo Boost Controller: CNC Billet Aluminum Manual Turbo Boost Controller. Adjustable boost knob increases horsepower and torque, depends on boost level. Allows adjustable boost PSI setting, can be easily mount under the hood. PSI Level: Up To 30 PSi Boost
Rank No. #10
GTP38 GTP38R Upgrade Turbo Turbocharger for Ford 7.3L F-Series F250 F350 Late 1999-2003 Powerstroke Excursion Diesel Super Duty 1831383C92
  • 〖Fitment〗: for Ford Excursion 7.3L & F series trucks 7.3L & Pick-up Truck 7.3L Powerstroke Diesel Engine Late 1999 -2003
  • 〖Turbo model〗: GTP38,
  • 〖Interchange Part Number〗: 7064475003 7064479003 7396195004S 7396195004S F81Z6K682BARM F81Z6K682CARM F81Z6K682CARM 1831383C94 1831450C94 4030078AN 5010014R92 57769900000
  • 〖Features〗: Turbine housing adopts ductile iron QT450-10, withstand temperatures up to 700℃ & Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900℃
  • 〖Attention〗: 1999 Truck Owners: Please Double Check the Build Date of Your Engine Before Purchasing; Turbo Does Not Fit Engines Built Before 12/98
Rank No. #11
S400 Turbo Rebuild Kit Turbo Lab America Schwitzer Borg Warner S400 Turbo Rebuild Kit
  • Borg Warner s400 360 Degree Thrust Bearing Rebuild Kit (Upgrade)
  • Designed for Higher Boost levels and Performance Applications
  • Machined from Copper Bar 360 Degree Thrust Bearing
  • Made in the USA!
SaleRank No. #12
Hybrid T3/T4 T3 T4 T04E Turbocharger 5 Bolt .63 A/R 400+HP Boost Stage 7psi-21psi for 1.6L-2.5L Engines Oil Cooled TO4E Turbo Racing+ Gaskets
  • Fit for 1.6L-2.5L engines,fit for 3.2L-5.0L engines in twin turbo application, capable to 800HP
  • Oil Inlet: 1/8 NPT oil inlet; Flange: Standard T3/T4 flange; Boost pressures: 7psi(.5 Bar) to 21psi(1.5 Bar)
  • Multi-Discipline tests, like balance, housing durability, wheel load limits, sealing, etc. are carried to enhance the quality of every unit
  • Horse Power: Boost Horse Power up to 300+HP
  • Cooling Type: Oil Cooled; Wastegate: External Wastegate
Rank No. #13
Carburetor Carbon Dirt Jet Remove Cleaner Tool Kit 10 Cleaning Needles with 5 Brushes for Car, Outboard Motor, ATV, Motorcycle Carb Jets
  • Cleaning Needles & Brushes Tool Set: 10x cleaning wire needles and 5x cleaning brushes for carburetor carbon dirt jet remove.
  • Make Cleaning Easier: Easily clean paint, dirt and other debris off, small passages in all airbrushes, spray guns like the fluid tips, air cap holes, paint cups, etc.
  • Different Diameters: The welding tip cleaning tools with multi diameters can help you clean out the blockages that you can't see, easily clean up the corners that bother you.
  • Easy to Hook & Hang: Detachable key ring for convenient hanging & storage. Reusable: With proper using, the carburetor cleaning brush carbcleaner kit can be used multiple times.
  • Material: Rustproof stainless steel wire and high density good elasticity nylon, no hair loss, for motorcycle carburetor engine moto cleaning and spray gun carbon dirt deposit remove.
Rank No. #14
PULSAR 04-07 6.0 Turbo Rebuild Kit NITRIDE HARDENED Unison Ring Staggered Step Gap Seals
  • Additional nitriding heat treatment for a stronger, more wear resistant and more durable unison ring
  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability
  • Staggered step gap compressor and turbine ends seal rings reduce oil blow by of the seals, Master combo kit includs high quality VNT vane(13.2mm) pack
  • Suitable for 04-07 6.0 with Garrett GT3782VA Turbo/04.5-07 Duramax 6.6 LLY LBZ with Garrett GT3788VA Turbo
  • Be aware that this kit does not fit early 03 6.0 Powerstroke turbo which has a different unison ring vane
Rank No. #15
Turbo Inlet Manifold Intake Elbow & Billet Wheel For 2001-Early 2004 Chevrolet Silverado/GMC Sierra Truck 6.6L LB7 Duramax
  • For 2001-Early 2004 Chevrolet Silverado / GMC Sierra Truck 6.6L LB7 Duramax
  • Fits Factory Garrett Turbo Only
  • Intake Elbow & Billet Wheel
  • This kit is intended for off-road use only
  • Not for sale in the state of California
SaleRank No. #16
maXpeedingrods New GT35 GT3582 GT3582R Turbo Charger Anti-Surge Compressor AR.70/63 600HP, Universal Turbocharger External Wastegate T3 Flange for 3.0L-6.0L Engines Water + Oil Cooled
  • 【Applications】:Perfect for all 4/6 cylinder 3.0L-6.0L engines. Bigger HP Applications,capable of Boosting Horse Power up to 600HP
  • 【Thread Size】: Oil Drian/Outlet (M8*1.25);Oil Feed/Inlet(M10*7/16-24);Water Inlet/Outlet (M14* 1.5)
  • 【Specifications】: Exhaust (Turbo Manifold) Flange: T3 Flange / Exhaust (Downpipe) Flange: 4 Bolt / Wastegate: External Wastegate
  • 【Compressor】: Trim: 57 ; Inducer Diameter: 61.5 mm ; Exducer Diameter: 81.5 mm ; A/R: 0.7 & 【Turbine】: Trim: 84 ; Inducer Diameter: 68 mm ; Exducer Diameter: 62.4 mm ; A/R: 0.63
  • 【Note】: Professional installation is highly recommended (No Instruction Included) . This is universal application turbo, so modification might be required for some vehicles. Any problems when you receive the item please contact us in time , we will try our best to solve it.
Rank No. #17
PULSAR 05-07 6.0L GT3782VA Turbo Nitrided Unison Ring + 13.2mm Vane Pack
  • High-Quality Nitrided Stainless Steel Nozzle/Unison Ring, Stronger & More Wear Resistant & More Durable
  • High-Quality 13.2mm Inconel Vanes
  • Suitable for 2005-2007 Ford 6.0L Garrett GT37VAS GT3782VA Turbo
  • Please Check your Vane's Height Before Purchasing, DOES NOT fit GT37VA Turbo with 10 blades Turbine!
Rank No. #18
PULSAR 6.4 Turbo Rebuild Kit Billet Compressor Wheel Combo
  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible.Spool up faster, Lower EGTs and More Boost!
  • High quality CNC machined brass thrust bearings enhances turbochargers durability
  • Upgrade heavy duty twin hydrodynamic journal bearings extend the turbo service life
  • Both heat shields added to this kit compare to other kit on the market
  • Fits 2008-2010 Ford 6.4 F250 F350 F450 F550 compound turbo
Rank No. #19
PULSAR 10 Blade Whistle Turbine Wheel Rebuild Kit for 05-07 6.0 Powerstroke GT3782VA Turbo
  • Upgrade 64mm 10 blade ultra flow turbine wheel flows more exhaust gas and provide excellent turbo whistle
  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability
  • Stragged step gap piston rings on both sides reduce the likeness of oil leakage from the center housing to compressor or turbine stage
  • Drop-in upgrade design, no modifications needed.
  • Compatible with 2005-2007 6.0L Powerstroke GT3782VA turbo ONLY. Be aware that this kit does not fit 03 6.0L Powerstroke trucks, check turbine wheel size(64mm) before purchasing.
Rank No. #20
S300 Turbo Rebuild Kit Turbo Lab America Schwitzer Borg Warner S300, S300SX3, S360, S362, S364, S366 Turbo Rebuild Kit 360 Degree
  • Borg Warner S300 360 Degree Thrust Bearing
  • Designed for Higher Boost Applications
  • Works with Industrial Injection s300 Turbos ( silver billet s366 and more)
  • Fits s300 s300sx s310 s320 s330 s334 s357 s358 s360 s362 s363 s366 s372 s375 s376 s380 and More!
  • Made In the USA!

Last update on 2021-07-01 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Ford 60 Turbo Rebuild Kit for our consumer to review. The reports above show ratings of the best overal, best cheap Ford 60 Turbo Rebuild Kit to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.