The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Foot Pedal Switch For Scroll Saw of 2020 – Consumer Guide & Reviews

Rank No. #1
DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788) & MLCS 9080 Billy Pedal Foot Switch, Deadman Style
  • Product 1: Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Product 1: Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
  • Product 1: On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
  • Product 1: Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Product 2: Hands-free router control means both hands on your work for safety and control
Rank No. #2
Delta Power Tools 40-694 20 In. Variable Speed Scroll Saw & MLCS 9080 Billy Pedal Foot Switch, Deadman Style
  • Product 1: Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
  • Product 1: Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
  • Product 1: Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
  • Product 1: Tool-free blade clamp allows for quick, easy blade changes in seconds. Bevels 0° - 45° left and right. Motor: 1.3 Amp
  • Product 2: Hands-free router control means both hands on your work for safety and control
SaleRank No. #3
Excalibur - EX-21 21" Tilting Head Scroll Saw with Foot switch
  • UNIQUE TILTING HEAD - Tilt the head 38° left or 45° right to keep the workpiece level, allowing for better control and more precise cuts.
  • INTEGRATED BLADE GUARD - Upper and lower blade guard assembly helps prevent accidental hand contact with the blade. While, the switch protection device prevents unintentional start-up.
  • ADJUSTABLE BLADE MOUNTING - Easily raise or lower the mounting position of the blade to make just the right cut.
  • SEAMLESS BLADE CHANGES - Finger-operated blade clamps make changing the blades quick & easy. No tool required.
  • LARGE TABLE SURFACE - The spacious work surface allows you to cut any material you need!
Rank No. #4
JET JWSS-22B 22" Scroll Saw with Foot Switch (727200B)
  • 22" THROAT
  • VARIABLE-SPEED RANGE: 400 to 1,550 SPM
  • ARM TILTS 45° LEFT AND 45° RIGHT
  • UPPER BLADE HOLDER CLAMPS AND TENSIONS BLADE IN ONE STEP
  • STABILITY: Large 12-7/8” x 23” cast iron table limits vibration.
Rank No. #5
WEN WA0392 120V 15-Amp Momentary Power Foot Pedal Switch for Woodworking
  • Provides hands-free operation to any woodworking tool
  • Press down on the foot pedal to start your machine and release to stop
  • Installs easily with textured surface to prevent slipping during operation
  • Handles 120 volt machines up to 15 amps in size
  • The perfect companion for scroll saws, sanders, wood lathes, rotary tools, drill presses, and more
Rank No. #6
Shop Fox W1872 16" VS Scroll Saw with Foot Switch, LED, Miter Gauge, Rotary Shaft
  • Motor: 1/6 HP, 120V, 0.6A
  • Variable speed motor
  • Blade speed: 550-1600 SPM
  • Max cutting thickness: 2-1/4"
  • Max. Cutting width: 16"
Rank No. #7
BUCKTOOL 16-inch Variable Speed Scroll Saw Pin or Pinless Blade with Pedal Switch Cast Iron Work Table
  • Variable Speed: 1.2-Amp DC Motor for Quiet, Smooth Performance
  • LED Worklight: Vibration-free LED light with no light bounce provides a clear view when cutting
  • Pedal Switch Design: With a hands-free convenience pedal switch for easily stop and start the tool with the tap of your foot when you need to drill a new hole, change blade, or if an emergency occurs
  • Quick-Change Blade System: Quick-Change Blade System with Quick open side panel and user-friendly blade holder, easy for blade changing, attached with 3 blades 2 with pin and 1 pinless
  • Cast Iron Table: Heavy-duty 16-by-9-inch cast iron work table bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth
Rank No. #8
Foot Switch, Foot Operated Pedal Controller Power Switch  Woodworking Machine Control, 5-ft Cable with Piggyback Plug, Deadman Style
  • Easy to use: Deadman style- It works when you keep holding the switch with your foot, release to turn off. Plug the attached 3-prong power cord into a grounded outlet and plug the machine or tool into the 3-prong receptacle on the back of the plug
  • Hands-free safety: The foot switch allows you to operate the tool manually without having to free a hand to hunt for your off switch, saving time in finding the switch and improving work efficiency. Tap with your feet when you need to stop the tool. Improve safety and prevent injuries in an emergency
  • Durability & Anti-Slip: With a rugged outer casing and textured pedal anti-slip design for long life, more efficient operation and high reliability. The switch base is equipped with a non-slip mat to help prevent slippage during operation, providing optimum comfort and sensitive switch activation
  • High quality: 5 foot length power cord with 3 prong plugs can be used anywhere, 18AWG wire 165 °F high temperature, safer and more reliable. UL certification. Adopt basic type micro switch, 1/2HP load capacity and service life of 100,000 times
  • Wide application: No variable speed control, but is compatible with variable speed equipment. Switch allows hands-free operation when using router, sander, drill press, wood lathe, scroll saw, wood carving tool, power tool or lighting or any household appliances
Rank No. #9
EXCALIBUR Scroll Saw Foot Pedal - Fits EX-16 & EX-21 with & - EX-01
  • package dimensions :5.59 cm L x 14.73 cm W x 19.56 cm H
  • Product Type :TOOLS
  • country of origin :Taiwan
  • package weight :1.01lbs
  • Lift foot from switch to turn “off”
Rank No. #10
DCT Foot Operated On Off Switch Foot Pedal Switch - 115V 15A Woodworking and Sewing Machine Foot Pedal Control Switch
  • POWER CONTROL FOOT SWITCH: Use the DCT Electric Foot Switch Pedal to activate your woodworking tools, power tools, printing tools, sewing machines, tattoo guns, textile tools, and other crafting tools while keeping your hands free
  • HANDS-FREE OPERATION: Improve safety and control by using this hands-free electric foot pedal switch on off foot switch; Easily start and stop power tools with this foot activated on off switch; Provides continuous power until turned off
  • COMPATIBLE WITH YOUR POWER TOOLS: Works with your router, sander, drill press, wood lathe, meat grinder, or other 15 amp power tools and machines (not included); Compatible with variable speed equipment (15 amp foot switch does not allow for speed control)
  • EASY TO USE: Plug the attached 3 prong power cord into a 115 volt grounded outlet, then plug your tool into the 3-prong receptacle on the base of the foot control on off switch; Push the electric pedal forward for power output, then push again to shut off the power
  • DURABLE CONSTRUCTION: Plastic texturized pedal top provides maximum durability and foot grip, while the 4-foot (1.2m) long power cord allows for versatile use anywhere; 6 x 3.5 inch (15.2 x 8.9cm) tattoo foot pedal electric switch tapers in height from 1.25 to 2.75 inch (3.2 to 7cm)
Rank No. #11
TEMO Foot Pedal Control Switch for Dremel and Other Compatible Power Tools
  • Foot Pedal Control Switch for Compatible Power Tools
  • Same switch that comes in our Grinder and Switch Set
  • Max speed: 5,000 to 15,000 RPM
  • Voltage: 110-250V 50Hz/60Hz
  • provide variable speed to connected tools when stepping the pedal with varied pressure. Heavy duty for extended use.
Rank No. #12
SSC Controls F200-1501 Foot Switch, Die-Cast, Electrical, Momentary Action, Single Pedal, 8-ft Cable with Piggyback Plug (3-Pronged), Made in USA
  • Medium-duty foot switch with highly durable die-cast housing and powder-painted finish.
  • Includes 8-ft cable with 3-pronged piggyback plug.
  • 15 A, 125 VAC, SPDT (wired normally open).
  • Momentary action - Press and hold foot pedal to turn on, release to turn off.
  • UL / CSA Certified and Made in USA.
Rank No. #13
Twidec/10A 250VAC Momentary Nonslip Plastic Foot Pedal Switch SPDT NO NC Handsfree Black Foot Switch for CNC Industrial with 5-ft Cable with Piggyback Plug (3-Pronged) TFS-1XCT
  • Momentary foot pedal switch EASY TO USE. Operate your tools with hands-free convenience and easily stop tool with the tap of your foot.
  • Contact Rating: 10A 250VAC;3 Terminals: Common, Normally Open, Normally Closed (SPDT: Single-Pole-Double-Throw).Hard-wired 5-foot cord and standard American plug.
  • Foot switch with anti-slip texture on the pedal, foot not easy to slip when doing work, foot gaurd also protect your foot from slipping
  • Mechanical Life: 1,000,000 Times;Electrical Life: 300,000 Times;Material : Plastic, Dust proof and flame retardant.
  • Dimensions: 100mm x 61mm x 36mm/3.9"x2.4"x1.4"(L*W*H);Cable length:1.5M/5-ft;Weight: 200g
Rank No. #14
MLCS 9080 Billy Pedal Foot Switch, Deadman Style
  • Hands-free router control means both hands on your work for safety and control
  • No need to free a hand to hunt for your router switch
  • 5 star performance and price
  • Greatly enhances router safety
  • MLCS quality guaranteed
Rank No. #15
DEWALT Scroll Saw, Variable-Speed, 1.3 Amp, 20-Inch (DW788)
  • Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch
  • On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Arm lifts so blade can be easily threaded through the material for inside cuts
Rank No. #16
OWSOO Foot Switch,Foot Pedal Switch,Heavy Duty Foot Switch,Pedal Skidproof,Treadle Foot Switch,Woodworking Machine Control,Momentary Control 3 Wire NO/NC Auto Reset Switch Foot Switch
  • 【Safety Protection】Waterproof, prevent oil, prevent shock effect is prominent.The foot switch allows you to operate the tool manually without having to free a hand to hunt for your off switch, saving time in finding the switch and improving work efficiency. Tap with your feet when you need to stop the tool. Improve safety and prevent injuries in an emergency
  • 【Easy to Use】This Foot Pedal Switch is momentary action type which controls the power on or off with built-in micro switch.A Relieved Switch Feel and an audible "click" when pressed.
  • 【Excellent Material】Surface metal spraying coating impact resistance, wear resistance, high temperature resistance, excellent performance.The sturdy outer shell and the non-slip design of the textured pedal can extend the service life and improve the operation efficiency and reliability. The switch base is non-slip, which prevents slipping during operation, thereby providing optimal comfort and sensitive switch activation.
  • 【High Efficiency】When both hands are occupied,it can free up your hands to perform other procedure while make the operation in control with your foot,which can make your work safe, easy and time-saving.
  • ️【Wide Application】Widely Used in emergency help, industry equipment, medical apparatus instruments and other fields need foot switch.
SaleRank No. #17
Linemaster 531-SWH Hercules Foot Switch, Electrical, Single Pedal, Momentary, Single Stage, Full Aluminum Guard, Orange
  • Momentary foot switch for controlling the on/off cycle of an electrical device
  • Cast iron base and cover for durability and weather resistance, cast aluminum shield for corrosion resistance
  • Non-skid base and raised ribs on cover for positive traction during operation
  • 125-250 VAC, 20 amp input with SPDT circuit for multiple uses
  • UL Recognized and displays the CE mark
Rank No. #18
Twidec/AC 380V 15A Heavy Duty Foot Switch SPDT NO NC Electric Pedal Momentary Foot Pedal Switch with Foot Guard Aluminum Case LT-4
  • Momentary foot pedal switch EASY TO USE. Operate your tools with hands-free convenience and easily stop tool with the tap of your foot.Reliable electric pedal switch with bright color foot guard, alert you from potential incident.
  • Contact Rating: 0 ~ 380V, 0 ~15A;3 Terminals: Common, Normally Open, Normally Closed (SPDT: Single-Pole-Double-Throw).
  • Made of thick aluminium alloy and heavy duty spring, durable and sturdy enough in doing work; Industrial foot switch with grilled plastic surface and have safety protection high and low temperature resistance, chemical resistance.
  • Foot switch with anti-slip texture on the pedal, foot not easy to slip when doing work, foot gaurd also protect your foot from slipping.
  • Dimensions: 200mm x 101mm x 125mm/7.9"x4"x4.9"(L*W*H);Weight:600g
Rank No. #19
Linemaster T-91-SC3 Treadlite II Foot Switch, Electrical, Single Pedal, Momentary, SPDT Wired N.O., No Guard, Black, 6 ft. Cord with 3 prong plug
  • 10 amp, 125V, 1/2 HP foot switch for use with light-duty electrical devices
  • Steel-formed housing with electro-coated paint finish for durability and protection from corrosion
  • Non-skid foot pad and base for stability and safety with two bolt holes for mounting to floor or equipment
  • Momentary action device with low profile and light actuation force to reduce operator fatigue
  • 6' cord has a 18 gauge, 3 conductor (18/3) plug type with ground and a 1250W capacity
Rank No. #20
SSC Controls S420-1501 Foot Switch, Maintained Action (Push On/Push Off), 8-ft Cable with Piggyback Plug (3-Pronged), Single Pedal, Electrical, Made in USA
  • All-purpose foot switch to turn on and leave it on without keeping your foot on the pedal.
  • Maintained action - Press once to turn on, press again to turn off (see picture).
  • Includes 8-foot cable with 3-pronged piggyback plug.
  • 15 A, 125 VAC, SPDT (wired normally open).
  • UL / CSA Certified and Made in USA.

Last update on 2021-01-16 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Foot Pedal Switch For Scroll Saw for our consumer to review. The reports above show ratings of the best overal, best cheap Foot Pedal Switch For Scroll Saw to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.